These are the old Parkhurst. The new ones are made in Spain and have all leather heel stacks now. The quality is incredible now.

@parkhurstbrand2019

Жыл бұрын

Correct they are! They look like they are first gen in this video actually. Currently the boots are on 5th gen.

Aaron your love and passion translates in each pair of boots your God blessed hands touch great work my friend.

@AaronG2480

Жыл бұрын

Thank you kindly!

I've followed the Parkhurst brand for a number of years now. I suspect that these are likely an older pair as they have changed the materials, build and the last a number of times over the years. You might have seen that their US manufacturer closed down after the pandemic. So the newer ones are made in Spain.

@AaronG2480

Жыл бұрын

You’re right these are an old model!

@parkhurstbrand2019

Жыл бұрын

Your suspicion is correct this is one of the first-generation models. Hope this clarifies!

@Lmolina90

Жыл бұрын

@@parkhurstbrand2019 Cool to see you on here. I've admired your brand for a while but the availability of my 7.5EE size and me having any money to spare have yet to coincide. Someday

You always do the best work Hombre. Respect.

Big Improvement from original. Just a Work of Art!

@AaronG2480

Жыл бұрын

🙏

Beautiful job, as always.

@AaronG2480

Жыл бұрын

Thank you! Cheers!

I may have to send a pair of 300s from jk to you. Such a nice job you do!

I have a pair of Niagra Parkhurst boots that I am quite fond of. I was a little surprised when I saw the cardboard heal stack, Parkhurst typically uses leather heal stacks. It was a relief to find out the heal was redone previously by another cobbler who didn't use the original ridgeway heels. Nice work Aaron, it is a pleasure watching a master at work.

@AaronG2480

Жыл бұрын

Thanks Patrick, the problem was not the Heel, but the fiberboard, you’re right parkhurts uses leather heel block. we don’t always use the matching heels, sometimes we can’t get them, if you notice I didn’t use the matching heels (430) that’s because the biggest heel is not wide enough and those ursi heels come in big/wider sizes. Cheers

@parkhurstbrand2019

Жыл бұрын

These were re-done previously by someone else by the time Aaron received the boots. I can't confirm what was done to them prior or what materials were used for the heel stack. I have never used cardboard though as the base/stack.

@AaronG2480

Жыл бұрын

@@parkhurstbrand2019 I think I’m going to buy a pair of your boots and take them apart just to show the audience what the boots are made of 😅

@parkhurstbrand2019

Жыл бұрын

@@AaronG2480 Probably a good idea actually, because this is not only a first generation build, but it doesn't have original build or original components in it. Up to you, could be good for context.

Yep the Ridgeway soles were offered previously.

Turned out GREAT! well done

The biggest problem I have with Parkhurst is that they always sell out immediately in my size. I can never get my hands on one.

@AaronG2480

Жыл бұрын

😅

Amazing work as always!

Wow, man! Another pair for the display case! Too nice too wear.🤣🤣 As always, your work continues to amaze. Nice one, brother.

@AaronG2480

Жыл бұрын

Thanks again!🙏

These came out fantastic.

Exelente renovación camarada saludos desde Pachuca Hidalgo

@AaronG2480

6 ай бұрын

Gracias, un saludo Yo me crié un tiempo En el refugio Hidalgo municipio de Atotonilco de Tula, a comienzos de los 90s y trabajé de ayudante de chofer de camiones AVM que por cierto llegaban a la terminal de Pachuca 🖐🏻👊

Beautiful work.

Just beautiful!

Parkhurst are made by a company in Spain now. I don't remember where they were made originally before covid hit everywhere

@AaronG2480

Жыл бұрын

Buffalo NY

@aradoran

Жыл бұрын

Artisan Boot and Shoes manufacturer in New York, I think was the name of the factory

Beautiful work! What i like about your jobs you seem to always change the welt which I think makes the final product look good and I think last longer.

@AaronG2480

Жыл бұрын

Thank you very much!

Nice work Aaron! Love to see the boots get some TLC after a few years. Question with that heel though - that pattern/brand of heel was not one of the heels I ever used during production. Did someone perhaps bring these to you after the heels being re-done elsewhere? Ridgeway soles always got matching Ridgeway heels. It went like this up to size 10.5/11 in production. 11.5 and higher all received both Commando soles and matching Commando heels. It appears this boot has a Ridgeway sole, but not the matching Ridgeway heel and stack they were originally made with at the factory. Any clarity on where/if the heels were replaced or re-done prior to them being brought to you would be helpful as these are not production specification for back a few years ago. Also I always nailed the heel top-lifts myself between the lugs, any Parkhurst owner could actually verify this on their pair and if unchanged, they should see the nails between the lugs on the heels. The exception to this was Dainite, where I nailed into the top-lift holes. It seems on this pair the nails were placed directly into the lug itself, which is something neither the factory nor I have ever done. Any background on if these heels were done before somewhere else before coming to you? Thanks!

@AaronG2480

Жыл бұрын

Thanks Sir I’m glad I got the chance to work on one of your boots 🙇. Those are URSI heels and yes, these boots were previously re heeled, I wasn’t sure about those fiberboard heel bases, but now after reading your comment and checking on your website I’m assuming they were replaced as well, I have nothing against fiberboard heel bases but leather is definitely better 😅 Thank you so much for watching the video and, for giving us some information about your boots. Greetings from Los Angeles California.

@parkhurstbrand2019

Жыл бұрын

@@AaronG2480 Cool. Yes neither the factory in Batavia when they were open nor I ever ordered from URSI, so yea these were not original factory heels. I am sure URSI though makes some great heels. Just never used them. The leather-board is a good question though, it could have came from anywhere. Since they were already worked on before you received them, naturally I don't know what could have been done to them. Neither the factory nor I have ever used cardboard though in our heels. We did experiment with different types of leathers and combinations of leathers and waxes in our bases for some time. Eventually we did move to straight veg tan leather cut from the insole bends leather sheets, which was tough to get within the US but finally we did. It's currently what is used in the boots for example. Those are hard to nail, am I right? I am sure you have plenty of experience with them! I had to go through probably 3 different styles of nail sets before I got one which I could finally use. DBG nails were always my favorite to use. But yea, hope this helps. Greetings from Buffalo!

Great work!

@AaronG2480

Жыл бұрын

Thanks Sir, Yeah as I mentioned, the heels (Top lift)where replaced by someone else, I talked to the costumer and he said that even thought these are an old model ,the website specified you guys use leather heel block, I really don’t know if the previous guy replaced them too or not,but after reading your comment I’m assuming he did it , I mean there’s nothing wrong with fiberboard but leather is definitely better, 😅 Thanks for watching the video and for giving us some info about your boots BTW I’m about to buy My very first pair of Parkhurst. Cheers!

Amazing job Aaron! 👏👏☝️ Quedaron perfectas! This is the reason why I send my boots to you across the country (from FL) so you can work on them.

@AaronG2480

Жыл бұрын

Gracias William ✋🏻

@willsteele9249

Жыл бұрын

Exactly!

A work of art once again! Incredible job!

@AaronG2480

9 ай бұрын

Thank you very much

Nice. Super chéveres quedaron esas botas

@AaronG2480

Жыл бұрын

🙏

I like that you always keep and showcase the original patina. 1st class work 👏👏

@AaronG2480

Жыл бұрын

Thank you! 😃

So nice…awesome work

@AaronG2480

11 ай бұрын

Thanks!

That's one excellent job mate.

@AaronG2480

Жыл бұрын

Thanks!

Fantastic content 👌 👏 👍

@AaronG2480

Жыл бұрын

Thanks

Gran trabajo, como siempre , saludos desde Catalunya.

@AaronG2480

Жыл бұрын

Gracias, Saludos!!

¡Sois un extraterrestre! Es admirable tu profesionalidad y tu arte.🫡👽🐐👏🏻👏🏻👏🏻👏🏻💯🔥 P.D. Que vergüenza que ciertas compañías te vendan botas con tan mala calidad. 🤌🏻🤌🏻🤦🏻‍♂️ Lo bueno es que estas tu para darles un toque de calidad y belleza. 👊🏻

@AaronG2480

Жыл бұрын

Gracias Bro 😎

Trabajo elegante lo felicito también tengo mi taller y nunca dejo de aprender saludos desde colombia

@AaronG2480

Жыл бұрын

Saludos hasta colombia 🇨🇴 colega, de echo todos aprendemos de todos

New sub..well done man. Id love to send a pair of boots to you one day. Where do you reside?

Which leather are these? Also, did you replace the welt or re-use the original?

Boot maker uses, among other things, cheap gemmings. Aaron comes along and shows everyone how it's done with a Rolls Royce gemming reinforcement edition!

@AaronG2480

Жыл бұрын

😅hey Bryce, it was just a piece of (denim) to reinforced it, hope you’re doing well Sir Cheers!

@Vultain

Жыл бұрын

Is this an American made Parkhurst? The newer Spain made one's seem like a different beast. Curious to see the difference honestly.

@parkhurstbrand2019

Жыл бұрын

@@Vultain These were, yes, and they were first generation using the materials we were able to source and of which the factory was able to work with at the time. Current boot models made in Spain and finished here in Buffalo are newer generation models with updated build and materials. Cutaways available on the website. Hope this clarifies, thanks.

What type of lug heels are those? Haven’t seen those before.

Any tecova cowboy boots?

The cardboard made to look like leather for the heel stack? I would prefer leather for that. Also, a split welt? Also, not a feature I would go with. The 360 welt is easier to do and seems to work pretty darn good. The soles on your boots as you were showing your feet, are those the Vibram relief cut soles? I have a pair of Allen Edmonds Park City boots with those Vibram relief cut soles. Great boots and comfortable. They will come see you when the soles need to be replaced. Super job unscrewing these boots you filmed. They look sharp now.

@AaronG2480

Жыл бұрын

Thanks ! As for my boots no they’re not( gloxy cut) soles , just the (keen)San Jose manufacturer soles

Aarón 100% mejora el terminado y la estructura de los trabajos que nos regala en sus vídeos. ¿dónde puedo conseguir un mandil de trabajo como este que traes? Saludos y gracias por tus videos y saludos a la banda, como dices😁😁😁😁

@AaronG2480

Жыл бұрын

Que tal Rogelio, un gusto saludarlo, el mandil lo compre y solo le adapte los tirantes de cuero. Saludos a usted y su esposa.

Parkhurst are my favorite boots. Great job Aaron these came out really good. Did these have the red-brown welt/edge finish to start with (it looks like it to me on the video)? I’ve always liked the red-brown edge dye Parkhurst uses. What are your edge color options when doing a resole?

@AaronG2480

Жыл бұрын

Thanks, As for the welt I’m not sure about the original color . We do natural,medium brown,dark brown and black edge finish.

What kinda boots you wearin there? Bull Run?

@AaronG2480

Жыл бұрын

They’re no Bull Run I didn’t like them, I got a pair of Keen San Jose about a week ago, these work really good for me .

Do you know what leather those are?

@AaronG2480

Жыл бұрын

Kudu leather

Que botas traes tu ?? Son White’s ??

@AaronG2480

Жыл бұрын

Keen Soy algo especial para botas de trabajo😢, muy duras para mi las Perry

hola cherry

Saludos mi buen oye cómo puedo contactarte porque nesesito reparar unos zapatos

@AaronG2480

Жыл бұрын

Saludos en el video está el email Reviveshoerepair@gmail.com

These boots look really nice & now they are really nice. Great job as always Aaron 👍