Replacing stolen catalytic converter on 2004 Honda accord 2.4L part 2 of 2
Автокөліктер мен көлік құралдары
Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world, is strictly prohibited without the prior written consent of RB The Mechanic.
#stolencatalytic #catalytic #converter #catalyticconverterrepair #stolencatalyticreppairpart2 #part2 #catalytictheftonrise #theft #catlaytictehft #riseofcatalytictheft #hondaaccordflexpipe #hondaaccordcatalytic #hondaaccordoxygensensor #2004accordcatalytic #2005accordcatlaytic #springbolt #accordflexpipespringbolts
Пікірлер: 49
Do you know what size the bolts are that you used between the cat and front pipe? Mine eroded so I won't be taking anything off in order to be able to check bolt fitting.
@RBTheMechanic
2 жыл бұрын
Note sure I usully buy them in a box they like 8MM thick or 10
My vin starts with a 1 and I think my car is federal 2004 Honda accord ex sedan 2.4l v4 and built in USA which cat should I get to get rid of the p420 ? And how much should I spend on it or is it not worth it
@RBTheMechanic
Жыл бұрын
That I don’t have information u would need help from parts department
@YoungShizzie
Жыл бұрын
@@RBTheMechanic how do I get that can you find out for me
@RBTheMechanic
Жыл бұрын
@@YoungShizzie nope call part department or go to honda dealer with vin they can help u as u know I’m not parts specialist
@YoungShizzie
Жыл бұрын
@@RBTheMechanic I’ll just drive it it’s the p420 code until it goes
Hey bro I have a 2005 Honda Accord v4 someone stole my convertor, my friend is junking his 2004 Honda Accord V6 do you think his convertor will work on my v4 ?
@RBTheMechanic
Жыл бұрын
No they are diffrent
Thanks for making this video. I'm wanting to know any info you might have on the two triangle gaskets with 3 holes in them, the ones you called "big fat gasket." I've waited 2 months and all I received is a black rubber gasket and I need the two triangular ones that are used to connect the cat to the inlet and outlet. I bought the Walker Calcat direct-fit catalytic converter 82895. Thanks in advance
@RBTheMechanic
Жыл бұрын
What u need to know about them gaskets ? Part number ?
@katrinareynosa8522
Жыл бұрын
@@RBTheMechanic Yes please. Part number would be perfect. I live in Cali so my Honda Accord is a SULEV. I have already bought the wrong catalytic converter taken it to a shop where they put it on just to find out it was wrong. The new catalytic converter was sooo much more money because it had to be CARB compliant. So it arrived and now the new one arrived and I want to make sure that I have the gaskets that fit it. I was lucky enough that the thrives that stole my cat took the time to unscrew it instead of cutting the underside of my car up but I have to now pass my car through a referee before going to smog it.
@RBTheMechanic
Жыл бұрын
@@katrinareynosa8522 sorry I got sick couldn’t get back to u but it’s called flange gasket it has 3 home looks like triangle I hope this is the one ur asking about but search it on amazon make sure it fits ur car here’s a kink Walker Exhaust 31383 Exhaust Pipe Flange Gasket www.amazon.com/dp/B0019I9SV4?ref_=cm_sw_r_apin_dp_AAZ7W4V8Z9X26EG8QDX2
So my cat just got stolen off my Honda and I bought a cat from a Acura would that cat work for my Honda to pass smog if welded on?
@RBTheMechanic
2 жыл бұрын
Acura and Hondas r same but as long as emissions is same it should work
@imbackupcodm2118
2 жыл бұрын
Yo mines an 06 2.4l Accord 4dr I need a cat, any recommendations
@RBTheMechanic
2 жыл бұрын
@@imbackupcodm2118 walker brand is what I use check online amazon or eBay make sure u get correct emission catalytic
@imbackupcodm2118
2 жыл бұрын
@@RBTheMechanic ok thanks a lot brother.
What's the piece called that attaches to the CC coming from the resonator ? The thieves cut it off. And where can I purchase it?
@RBTheMechanic
Жыл бұрын
Which piece the adapter or flex pipe?
@joslimshirazi2686
Жыл бұрын
@@RBTheMechanic Not the adapter but the pipe where the rear end of the CC bolts on to. And then you use the adapter to connect it with exhaust. When they cut off my CC they took that part with them like they did with this car
@RBTheMechanic
Жыл бұрын
@@joslimshirazi2686 not sure which pipe ur referring to can u pin point it at what time frame u see it in the video
@joslimshirazi2686
Жыл бұрын
@@RBTheMechanic @16:38
@RBTheMechanic
Жыл бұрын
@@joslimshirazi2686 oh that comes as big long 5 foot pipe I cut that off
Hi thank you for this video. My catalytic converter was stolen from my Honda Accord 2004. I wanted to ask you if you can give me the part number for a Walker Catalytic converter please. Thank you
@RBTheMechanic
Жыл бұрын
Well I’m not in shop I can give the part number but u need to go by emission of ur vehicle there federal and cali so don’t put in wrong even if u have my part number this one was federal check all of my videos on this
@sharonr6894
Жыл бұрын
@@RBTheMechanic Ok thank you I live in NYS when you can give it to me I would appreciate it.
@RBTheMechanic
Жыл бұрын
@@sharonr6894 remind me tomorrow morning send me message
@sharonr6894
Жыл бұрын
@@RBTheMechanic Thank you
@sharonr6894
Жыл бұрын
Hi can you give me the part number for the catalytic converter please?
What the part number is from adapter
@RBTheMechanic
Жыл бұрын
It’s on the video
Hey so first off thanks so much for making and posting this video. I used it to order all the parts I needed for about $200 and am saving myself about $650 trying to do it myself. My Honda is an 04 with 185k miles......would I just want to replace the whole rest of the exhaust/muffler with the walker replacement I got? I ordered a coupler to piece the parts together but since I have so many miles....wouldn't it probably be more prudent to just replace the rest of the exhaust/muffler with the one I ordered? It would save me the hassle of measuring, cutting, and using a coupler. Is the walker exhaust replacement just much cheaper metal or something?
@RBTheMechanic
Жыл бұрын
Well depends on ur case how bad is the rear pipe mines looks so good I only had 70k miles it’s a shame they did this and I would have never changed the rear muffler pipe
got any info on the cat part #
@RBTheMechanic
Жыл бұрын
It’s all in the video check part one also
Yea but if you spent 200$ on that cat and it’s not from Honda the p420 code will be back I replaced my whole exhaust and my engine light came back on because I paid 150$ for a cheap cat
@RBTheMechanic
Жыл бұрын
I have it had for over a year no sign so far
Great video ...how much for parts and labor for this ...I got fu#ked last night on my 2004 honda accord
@RBTheMechanic
2 жыл бұрын
Oh man sorry this basterd are so messed up …. Anyways u prolly looking at like $900 in parts and like $300-600 labor
Nice bro!
@RBTheMechanic
2 жыл бұрын
Costed me lot
Sub titles please..I axing you
@RBTheMechanic
2 жыл бұрын
I think u have to click it will show up and then u can select language I will check it out on my end