The only part people really need to see is the spider gear placement haha.

Matt's daughter is a lucky girl. Not only did her father stress test the 3rd member of the truck finding the weakness thus preventing HER from breaking down somewhere and getting stranded, he fixed it too.

Thanks for the video...just finished my axle bearing. You made it easier than other videos I've watched

I know the feeling. My 17 year old daughter is driving my CLK350 Cabrio.

Mighty fine job sr 👍

Thank you, you made look like i can do it myself very good,,I'm going to try it

Especially with the spider gears

I really learned thank you for your time and video

Hi Jim, UTG sent me here. Looking forward to watching your videos Peace from Canada

@bennettshotrodgarageclassi7068

2 жыл бұрын

Thanks for coming

Best rear diff video on youtube. Tackling my 3.73 tonight. Good work fellas.

I almost choked to death on white castle when he pushed in that axle I thought your hand was done.

Matt did an awesome job of fixing this differential. The only thing I miss is the story how it got broken in the first place. Also, I bet Austin was hoping to see Matt’s daughter again….

@matthewboyd3621

2 жыл бұрын

A little to much throttle lol

@ewconway

2 жыл бұрын

@@matthewboyd3621 It happens to the best of us. You fixed it so that’s all the counts for you’re daughter 👍

my chev 2000 Silverado is making noise and going to try to fix it thank you for explaining

Happy Thanksgiving Jim and the whole Bennet hot Rod family

I wish you had shown how to install the spider gears.

sounds good

When putting the gears back in do you put the axles in?

Im a bit confused. My spider ears fell out. So I did put them back in, and of course they are lined up with the pin, and the retaining screw is in there, but I cannot get the axles to turn, they're just always moving free, no matter that the drive shaft is doing. Are there particular gears the spider gears need to ride on or what??

I have the same situation going on but i have a posi trac If my spider gears are bad does that make the whole unit bad?

Question: What is the purpose of the "crush sleeve"?

I'm glad I'm not the only one who dirty talks my truck,when I'm working on it. Lmfao good shit brother. Definitely gave me the confidence I needed to do this on my 09 silverado.

Yee Haw!!!!

I just replaced my bearings and seals in a Hummer H2 and the spider gears fell out. It was very frustrating getting them back in. They also had a wear ring that kept falling off too.

Gear oil is one of my favorite smells.

@benchesnut3715

Жыл бұрын

Fucking disgusting

How do you get the shims to stay in place with the little spider gears

@devthedude776

5 ай бұрын

The gear oil makes the shim stick to the gears

To much power ? Old gear oil ?

You should have installed a limited slip. So it doesn't get stuck in a mud puddle. VERN.

@bennettshotrodgarageclassi7068

2 жыл бұрын

not really necessary when youre putting your 17 yo daughter in it

Matt - I thought for sure you were gonna have some swelt up fingers when that axle came ramming down that tube. 😳

Nice dad

should take about 5 minutes to put the spider gears back in. center everything, then drop one in from the top and slap the other one up with your right hand, now rotate the drive shaft with your left hand untill they line up with pin

Arthur Morgan you saved the day

What, has been done, to the truck? Why, does the rear differential, keep breaking?

@bennettshotrodgarageclassi7068

2 жыл бұрын

because he beats it like a red headed step-child

One wheel peel

@matthewboyd3621

2 жыл бұрын

16 yr old girl don't need to get sidways

If you had a Ford nine-inch, you could have done this on the bench and not on your back under the car. If you had a Dana 60, it wouldn’t have broken at all.

@bennettshotrodgarageclassi7068

2 жыл бұрын

its for a 17 yo girl. she doesnt need bulletproof

@datasailor8132

2 жыл бұрын

@@bennettshotrodgarageclassi7068 Tell that to my late sister. Between the time she turned 16 until I did four years later she blew out four transmissions in our 1957 Chrysler New Yorker.

@matthewboyd3621

2 жыл бұрын

Key word Chrysler not chevy Bubba big difference lol

Too much throttle, or you another victim of poorly made / machined parts? Merry Christmas to Jim and the whole garage! Keep being honest, it's a wonderful sight to see!

😁👍👌🖖✌😎

The camera has legs and groans

You guys don't order cases of brake cleaner pb blaster etc shit order it online half price and never run out.

you didn't show in your video how you were able to install the 2 small spider gears : [

@TheVanillaGorilla913

10 ай бұрын

If you finagle one up top and hold it in place over the axle gears you can smack the hell out of the bottom one and it will pop in place as long as it’s all lined up. Then just rotate the whole thing enough til she’s in place and bolt her down. You ain’t gonna cause enough damage to these gears by manhandling them, don’t be afraid to give ‘em a solid whack or two. Don’t go crazy and grab a deadblow or anything but a firm palm heel strike will do you

Bro put in a 410 gear ⚙ in ur truck will save u money and time in the long hall

Dude cut out the main part of installing the gears

why is it nobody ever actually shows you how to get the spider gears in every video I seen on this they dont show how the actual gears go in it sucks!

My fu_king spider gears both came out while I was doing this and I can not get them back in for the life of me. Fudge nuggets!

The part I need to see you cámara guy skip that.

Why you even put this video on KZread you left out the part you label the video for big thumbs down

Should have just swapped to limited slip

@matthewboyd3621

2 жыл бұрын

It was factory limited slip but I don't need my 16 yr old daughter getting loose in this bad ass Chevrolet

Holly fck these comments 🤢🤢🤢

auto zone gears lmao

@bennettshotrodgarageclassi7068

2 жыл бұрын

they were yukon gears. Autozone only makes floor mats

Sorry, but putting in the spider gear, is what I watched to see how it was done. You cut that important part out. Making your video useless.

Doing it all wrong

wtf you skipped the most important part, putting in the spider gears. Problay to save embarrassment fighting to get them in. But wtf was the point of the video then???

I didn't see the key part, the two small gears, how you insert it in?