Thank you. Thank you. Thank you. My bolt was just turning and turning when trying to remove manually. I didn’t want to use a drill or impact driver for fear of rounding the bolt head. Watched this and saw your approach and explanation. Used the impact and they spin straight out. Thought I was going nuts ! Appreciate the time you put in to making this video 👍🏻

@bikerdood1100

Ай бұрын

Just glad it helped First time I used a drill for it It’s was hart in mouth stuff but it works surprisingly well

Just discovered your video, really helpful for me, love the home made special tools you made for the fork seal replacement. Thank you for taking the time to make the video, really helped me.

@bikerdood1100

Жыл бұрын

Thank you for feedback

5:10 Nice hammer idea. Love it ❤ All best!

@bikerdood1100

Жыл бұрын

Thanks

VERY GOOD HELPFUL VIDEO

@bikerdood1100

Жыл бұрын

Thanks for the feedback

Couldn’t be more convienient. I’ve just popped the seals on my motorcycle, so I’m about to get my hands dirty too.

@bikerdood1100

Жыл бұрын

Not too dirty hopefully

@kasperkjrsgaard1447

Жыл бұрын

@@bikerdood1100 Nah, I’m started using nitril gloves. Old oil isn’t good for the skin.

I have always found it easier to remove the botton slide holder while the fork is still held in the fork clamps and let the oild out then remove the fork to replace the seals ?? I have done it many times like that because i dont want to put the fork in a vice even with vis soft clamps.

@bikerdood1100

7 ай бұрын

That’s easier if you have a lift for sure

Ever tried electrical tape for seal driver? Worked wonders on my ninja 500!

@bikerdood1100

27 күн бұрын

Heard of that one but not tried it

Gotta do my it175 fork seals.....i guess the same applies!? many thanks and great video! cheers :-)

@bikerdood1100

4 ай бұрын

Should be very similar

@migliaman

3 ай бұрын

trouble is one of my forks has a jammed in drain screw so that will be a pain i bet!@@bikerdood1100

@bikerdood1100

3 ай бұрын

@@migliaman depends Sometimes they just spin we mounted an Allen driver in a drill and spun the sucker That worked 😂

When you put the Allen bolt back in the bottom, I didn’t notice you putting on the washer first ,or was it stuck on the bottom end fork .

@bikerdood1100

Жыл бұрын

It was stuck there

Does this method still apply if it is pre tentioned for example a kwak j1 modle

@bikerdood1100

Жыл бұрын

Now that. I don’t know I’m afraid

better to drain the oil first, either by taking the top cap off and inverting the fork, then replaceing the cap or, by using the drain plugs fitted to the bottom of some fork legs, (like mine!) then theres no oil to lubricate the damper rod and the bolt will undo more easily....

@bikerdood1100

6 ай бұрын

Assuming there’s an oil plug A lot don’t these days ( most)

@roythearcher

2 ай бұрын

@@bikerdood1100 Once you've loosened the bolt, why not just take the top cap off and remove the springs and spacers and tip out the oil? Pumping the fork will help expell most of it, then you can finish removing the bolt from the bottom without flooding the floor. You will still have some oil in there but it wont be anything like the amount of a full leg.. You should also clean any threadlocking compound off the bolt and out of the treads in the damper rod to help insertion and apply fresh loctite (other compounds are available) upon re-assambly.

so i started by taking off the top, and tried driving the seal out, now the tube is stuck pretty far down. i haven't taken the lower bolt out yet

@bikerdood1100

11 ай бұрын

Well there’s your problem 😂

@JoseppeM

11 ай бұрын

​@@bikerdood1100 so i used a metal broom handle and it got the first one apart and back together. the bottom bolt wouldn't come loose on the second one. now the broom handle isn't holding it well enough to keep the damper rod from turning. I'll just buy the tool

@JoseppeM

11 ай бұрын

@@bikerdood1100 so I bought the tool and it seems like the threads on the damper rod have broken. The bolt is loose but still captive. FML

@bikerdood1100

11 ай бұрын

@@JoseppeM well if you’re referring to the one on the bottom It will just spin unless you can 1 compress the spring effectively 2 turn V fast Both As it’s usually an Allen bolt I cut the correct size Allen wrench so it’s just straight, mounted it in a drill, compressed the spring with body weight and wam off they come after about a second, once loose I undo it by hand and bob is a family member as they say

@JoseppeM

11 ай бұрын

@@bikerdood1100 it spins either way. With the holder tool or with the fork together

Good video but the intro is Far too long

@bikerdood1100

Ай бұрын

Or are people attention spans too short 🤔 I use a short one now to be honest 😂 Older video

can you or have you ever done this leaving the fork on the bike ?? I have an old silver wing and to get to the middle clamp means taking all the fairing off "massive job" well i am lazzy !!

@bikerdood1100

11 ай бұрын

No I have not I’m not sure how feasible that would in al honesty

@allanhughes7859

11 ай бұрын

@@bikerdood1100 thanks for the reply I have a funny feeling I am going to have a go wish me luck !!

@bikerdood1100

11 ай бұрын

@@allanhughes7859 good luck Isn’t too difficult, be sure to replace the oil at the same time as old oil itself can be the cause leaks

@allanhughes7859

11 ай бұрын

@@bikerdood1100 Will do but just found a chap that always does them in situe the clamps act as a natural vice for all the bolts infact I would go as far as saying it makes the job easier so will now do it this way Cheers !!

@raymondhines908

9 ай бұрын

HI Were you succesful servicing the forks while fully installed? Thanks