I immediately thought of the 56 Chevy tail light with the filler hidden behind it when you mentioned your idea. Awesome idea! I love it!

I watched the video a little further along and I got my answer to the gas tank question that I posted earlier, you sure are doing a nice job! My compliments, Mike

That Dodge 5500 with the boom sure is handy! And yes, the filler behind the taillight, as with the 1950’s Cadillacs, would indeed be cool.

I like both of your last ideas on the fuel filler.

Better to have the gas filler in the side of the truck to keep it from allowing water to get in, and the full use of the bed!

Love it !! Going to have to come up with something similar on my wifes 73 K20 with dual saddle tanks. The only issue is we dont want to lose the capacity. The truck is fuel hungry .

Hoarfrost day I see LOL Double flare the tubes or expect leaks later. Use as much steel line as possible even if just a foot or two. Rubber hoses should only be small lengths such as 6" or less. Like the idea of getting rid of the double saddle tanks. Putting the filler opening behind the taillight is a great idea!

I really like the idea of placing it behind the light. I have a 67 Chevelle and you know the layout on this model.

Nice fabrication and skills bud I’m doing the same thing on my 84 Chevy pickup nice to see a detailed video

I might add a blazer tank for a 3rd tank some day. For my application I really like the saddle tanks for low centered weight. And I do like having a spare tire at least for now.

A great project! On the tank filler, the tail light is very retro and cool. I suppose just above the tail light there isn't enough room for the filler door. As usual, great skill and craftsmanship, Mr. Jayhawker!

@TheJayhawker

Жыл бұрын

Thank you sir! I usually try to shy away from Rube Goldberg fallout, but this is one project I'm kinda excited about trying. A Merry Christmas to you folks!

Filler tube behind tail light is a very a classy way to go, specially on a pick up.

++++GREAT HIDE THE FUEL FILLER Ala tri five chevys. I love that touch

Good job on the mod & fabrications! I, too, am not much into modifications but I think you made a good decision regarding the gas tank. There is a you tube channel of "Fitzee's Fabrications" & he has a video where he moved the filler neck from one side of a truck bed to the other side. That might be worth your while to see that if you want to move the gas filler door. Of course, you most likely could do the Mr. Bean cut & paste move yourself but I thought I'd suggest it anyway. I know how good the feeling is when you start to grab stuff from the disassembled pile & put it back where it belongs. But, still, I wish I could just snap my fingers & have it all fall into place. It'll be awesome to see the engine, tranny & cab back together -- I'll be pullin for ya.

I would HIGHLY recommend putting the fuel vent tube and vapor canister back into play, because that will help in tank pressure regulating and putting the fuel vapors to work with intake delivery!

@TheJayhawker

Жыл бұрын

Yes, I'm considering my options there. I may just mount it hidden under the cab where one of the fuel tanks used to be and plumb it from there.

Nice work , please keep at it.

Through the taillight would be practical for a mod. (Once it's done. 😉)

Heck yeah to the filler idea from the 50's. I've often thought of doing Ol' suburban tank swap. Less maintenance and aggravation.

I’d leave the saddle tanks and still put the suburban tank in the back then make a transfer pump to fill the suburban tank on longer road trips

There's a company out there that manufactures a flush mount gas filler neck, it has no door and you can push in and turn and remove the gas tank cap they really are pretty nice I believe they come in a chrome color but you have the option to paint it the color of the body. Kind of cool and pretty simple to do. Just a thought, putting it exiting the tail light is quite a bit of work .

Merry Christmas, to You and Your Family... ❤❤❤

@TheJayhawker

Жыл бұрын

Merry Christmas, you guys are great!

I'd would have did all the straighting and modifications or whatever was needed to be done first before painting the frame.

So if you want the filler in the tail light LSFab has a kit for that.

Merry Christmas!

@TheJayhawker

Жыл бұрын

Merry Christmas, you guys are great!

Merry Christmas to you and your family.

@TheJayhawker

Жыл бұрын

Merry Christmas, you guys are great!

Only thing I seen I'd do differently is the double flare on the fuel lines..that flare tool is ok for soft copper but not for brake or fuel lines

parker hannifin compression fittings are a good alternative to flared

like a 57 chevy , i like the idea myself, there is also the option of a 90 threw the wheel hump into the bed, you will still have your pay load area , myself the only thing good about a ford is you can stack hay were a chevy it sure ruins a great stacking hahahh what ever you do take in consideration that back by the wheel there is always that dreaded chance of blowing a tire, so the neck is a concern , i found out the hard way that the little bar from skin to frame was there for a real reason, hahahah, i sure hope you dont regreat like i do of not having the spare carrier , every time i go to town i have to lock my spare in the cab of truck hahaha. hey bro just want to say that even though the season of the lord is on us and many claim it isnt his birthday , i declare it is and every other day is my celebration to him may you and your family have a wonderful christmas and may you have a safe and happy season

@TheJayhawker

Жыл бұрын

Well, in rural Kansas it's more of a norm to see entire farm shops thrown onto flatbeds pickups than many other places lol. I never did have a tire carrier for this truck so it was always in the bed. Once done, I would like to get a tonneau cover for the truck so the tire can just hang out under there.

I heard of the lesser known cousin of Fahrenheit, he went by Kelvin

Hey . I watched the whole thing. Look very good. Have you thought of running the fuel filler neck thru the fender .? I'm planing of using that tank on my 54 Ol' Beater. What are the dimensions of a 87 Subarba tank? Just fwd-aft. Side to side. Thank you.JB

Good afternoon in 1984 I purchased a brand new square body 6 cylinder 3 speed on the column and drove the truck for 20 years before it rusted out. I live in the south on the coast and it lasted a little longer than the Northern Truck. My question is if you happen to need to change your fuel tank after installing a Suburban style tank are you going to be able to do that? I do appreciate what you're doing because I really like the square body good luck with your project, Mike

@TheJayhawker

Жыл бұрын

Yes, it will drop out like any other tank from the bottom. Depending on what happens with the exhaust, the tailpipes may have to be removed. Having said that, rust here in Kansas will eventually happen over the course of 20 or 30 years of daily use, but not right away and not on a truck like this that will be more of a fair weather driver anyway. If it hadn't of been for the plastic tank shields collecting dirt up against the tanks they would still be fine. I would love to own a square body model with a 292. Thanks for watching!

I love finding g these videos because they're helpful, but it seems like every one has someone with huge shops, tools and budgets. Any videos out there with someone living check to check fixing theses trucks.

@TheJayhawker

Жыл бұрын

lol, well that is me... Everything you see me doing has been paid for by spending my time working on other peoples projects. If you watch videos in my '48 Chevy playlist you will see my personal home shop. That was a project I did for another guy and it provided the funds so that I could buy the parts for this '86 GMC. As for the shop my GMC is in, that's my father-in-laws (who I work for full time) warehouse/shop that he graciously allows me to use the corner of for my overflow projects. Incidentally, he built his own business up working hard, day by day, check to check which is why he can have a nice building like that. Thanks for watching, and I know what you meant when you left the comment and I agree. Sometimes impressions aren't what they seem.

They now make a fill it rear tail light

@TheJayhawker

9 ай бұрын

At $500 buck it seems a little steep to me, maybe it will go down....maybe not

@PeterHatch-mx7zc

9 ай бұрын

@TheJayhawker lot of R&D in to it but does look nice

Merry Christmas Jay!

@TheJayhawker

Жыл бұрын

Merry Christmas, you guys are great!

What tank is that and where from? 25 gallon blazer? I’m trying a 31 gallon and had to move my rear cross member back. My truck is c notched and lowered.

@3_3rd_gens

Ай бұрын

Did you ever find out what tank it was? My truck is airbagged and laying frame and want to rear mount the fuel tank

does this still give u room to bring the rear shocks inboard and run a top bar to mount them to?

I am a little surprised that your filler fits under your bed. I am working on putting a step side on top of a tanks inc blazer tank and the filler neck sticks way up.

@TheJayhawker

5 ай бұрын

Interesting, you wouldn't think there would be a difference there.

@kelleys81

5 ай бұрын

@@TheJayhawker Looking over it I used actual tank mount crossmembers from a Blazer and you did the modify method. It looks like the front of your tank is lower via that method.

I’ve seen that done before

Did you have to move the rear shock to the outside of the frame? Or is that model like that? Got the tank now that 1 rear shock is in the way

@TheJayhawker

Жыл бұрын

No, I didn't have to modify any of that.

We make a hinged tail light assembly for square body Chevy trucks. Let me know if I can help. We have done a few gas tank relocations and I’m against moving the stock filler.

@TheJayhawker

Жыл бұрын

I would be very interested in seeing what you make.

What rubber did you use for the tank straps and tank? Where did you get it.

@TheJayhawker

Жыл бұрын

I mention that in the next video in the series. Simply went to walmart and bought soft rubber garage door seal

@derekczeschin5623

Жыл бұрын

@@TheJayhawker oh sorry I didn’t know it was a series. I’m putting one in my 1 ton and the passenger side shock is in the way. Did you have to move yours? If so I’ll watch the video that’s in and see what you did

@derekczeschin5623

Жыл бұрын

@@TheJayhawkeroh sorry I didn’t know it was a series. I’m putting one in my 1 ton and the passenger side shock is in the way. Did you have to do something with it also? If you did I’ll go watch the video to see what you did to get an idea on what to do with mine.

Hey buddy I know this is an old video a year old but where did you get that tank at on the rear if you don't mind me asking I really appreciate you sir

@TheJayhawker

3 ай бұрын

I think this one came from Summit Racing, thanks for watching!

I still waiting on taillight mod I thinking about the same thing

Well, shit the bed...

You talk to much

@TheJayhawker

11 ай бұрын

and you have a tendency to be rude, but I love you anyway.