I did not know the roller assembly was replaceable!!! Thanks for the Video!!!

Brilliant. I was hesitant to jack up the frame (and wall) to try this repair. I’ll return and comment after the weather breaks & I give this a shot. Thank you for creating this!

@DadsGotADeal

Жыл бұрын

Please do!

Be very careful when popping off the side panel, you can easily break the glass, especially if the rubber gasket is stuck with the panel.

Good job doing that without any swearing!

Take the door down, then remove the screws from both sides, then use a 2x4 as a wedge to knock the lower frame off, replace both wheel assembly at one time, replace the lower frame, replace screws, put door back in adjust hight. Replace track if necessary.

Outstanding "real world " video! Thanks ....helped out a lot.

@DadsGotADeal

Жыл бұрын

Glad it helped!

Awesome video. Just what I needed. Thank you!

These look like my doors. Been unsure just what to do to replace these. Looks like you've gave me a good idea. Look a little tricky but I might just have to go for it. Really appreciate your video. Thank You.

Nice trick. I will do the same. I wish I could send a 6 pack your way, lol.

Wasn’t easy but thanks to you we have a working door! 🎉

thanks, i believe that approach is exactly what i was looking for

Thank you for this great video. I had no way to remove the door because there wasn't enough head space. I was able to follow all your steps with success and now I just need to find the correct replacement wheels.

There is a Sliding Door Repair Cap that you can buy at the home center to repair the track.

Use your pry bar to lift the door a little to take the pressure off the wheel assembly and it will slide out a lot easier

perfect! my old one slid right out

Are there 2 more sets on the other side of the door?

My doors are really old. It has two screws, a big one and a smaller one. Do you remove both screws?

Way easier to just the door out and lay it down

@valeridrachev2628

8 күн бұрын

You can't get this type of door out. The track at the bottom is too high. I have been trying to do it several times, but couldn't get it over the track because there was not enough space at the top. The professional guy whom I called did exactly the same like in the video.

WD40 before trying to remove wheels

Dale...Dale...no power tools. I said no power tools.

Why don’t you buy a cheap tripod , I see so many utuber’s fumbling with only 1 hand.

Your are doing wrongly

@roseymalino9855

4 ай бұрын

Evaluate. Innovate. Job completed.