My Email For Sponsorship Offers Hungrydansgot2eat@gmail.com INSTAGRAM instagram.com/ifixshet?igshid=NzZlODBkYWE4Ng== The Official I Fix Shet Facebook page To ask questions and Receive help or just partake in the group activities facebook.com/groups/631191488517301/?ref=share_group_link PayPal ID Email For Donations If you feel so inclined to support what I do. Hungrydansgot2eat@gmail.com

I wanna thank you personally… I’m a guy that really didn’t know a lot about scooters when it came to maintenance and my bike didn’t start for a while. Like a month I tried everything. I couldn’t take it to a mechanic because I didn’t know anyone in my area. I had to manual take the bike apart and learn it and actually analyze what I was lookin at. I changed the spark plug which didn’t help at all and I was just about to sell it cuz at that point I didn’t know what else to do UNTIL I came across this video and how easy you made installing a carburetor looked. I installed my carburetor and it turned right on and when I tell you how relieved I was.. I usually never comment on videos but this video saved my bike and I thank you for sharing this video to the world and making me a happy man. Have a great day sir

@IFixShet

11 ай бұрын

That's why I do it 😉

LMAO! Looking for scooter repair videos (looking to get old 50cc scooter to learn how to both repair as well as ride a scooter) and I saw the I fix shet and thought I'd stay. Thank you very much for both sharing your knowledge and sense of humor

@IFixShet

Жыл бұрын

I'm glad the video helped you man

Great a 5 minute repair turned out 11 min great video

Thanks for the video man. I love that your videos are just really basic and do the point.

@IFixShet

Жыл бұрын

Always! Don't forget man if you haven't subscribed show a little support it helps me grow and helps my content be seen by more people cheers glad I could help

Thank you bro! Really helps me to replace a new carb to my 50cc

Your videos have really helped me. They're well done.

@IFixShet

Жыл бұрын

He'll yeah man I'm 😊

Thanks man learning so much from ya vid saving me alot of money on labour thanks again

@IFixShet

9 ай бұрын

That's what this whole channel is about

this video is realy good. thanks for sharing your knowledge.

Great vid , dude. Very well done, thanx.

thanks bro u helped sm. i couldn’t find it anywhere. i thought the one that i bought was wrong. didn’t know u could just take the old bucket off and use the one the carb came with. thanks again

@IFixShet

Жыл бұрын

That's what my Channel's here for the way you can help me is just drop a subscription turn on the notification Bell I make all sorts of scooter content all the time

Needed this. Thank you.

@IFixShet

Жыл бұрын

No problem don't forget to drop me a subscription it's your way to help me in return

cool replacement and great video

@IFixShet

2 жыл бұрын

Easy peasy lemon squeezy

Thanks for the help I have a lot of questions

@IFixShet

11 ай бұрын

I hope after watching this you don't have a lot of questions

Solid video. Than you.

I need to change my carburetor tray. If I remove the carburetor, not moving the adjustment screws will it throw the carburetor out of control.Thks for your video 😊

Great video

@IFixShet

11 ай бұрын

Thanks

Where does the hose attached to plastic to tha manifold go to

Do I just subscribed I haven't even watched it yet but you seem to be pretty confident definitely going to be checking out all of your content I'm working on my 150 right now so I have a little cruiser when a visitor comes so when I'm riding my ninja they can have some fun.... Yes I know I can't go over 65 but I like the twisty turns more than anything on my motorcycle and the scooters are great way to get good videos because it's so quiet and easy to ride

@IFixShet

8 ай бұрын

So a 150 CC carburetor will have a couple vacuum lines coming off of it that are slightly different than the 50 CC but just take a picture before you get started so that you know where they go. Other than that it's pretty much the same installation

@PrestonMiddle

5 ай бұрын

​@@IFixShetso it's easy peasy to install a 150cc carburetor on a 50cc ?

@IFixShet

5 ай бұрын

@PrestonMiddle I don't know why you would want to, but sure.... Most likely it will be getting too much fuel And have a hard time staying running unless you put a big bore kit on it.

How about the tube connection at the side of the intake manifold, wher should to connect it

I have an older Tao Tao - it’s the VIP, the manual says cy-50a. I bought a replacement carburetor off Amazon but I don’t think it’s the right one. Any advice on how to track down the right one? I think it’s a 2011 or 2012 model year, whenever I search that on google, it just brings up Amazon and the same carburetor I bought

Appreciate you sir

@IFixShet

3 ай бұрын

No problem

Now im know. THANKS MAN 🫡🫡

so, i am an ebike mechanic, but i have been getting customers with Chinese scooters coming to my shop. had a customer who saw my work on ebike, i have no experience with Chinese scooters but he believed in me and said he knew I could fix em using your video taught me some things I needed to know about carburetors it's not so scary any more. thanks. /Bklyn👑

@IFixShet

4 ай бұрын

My dude!

I have a 49cc scooter I'm working on. I have bought two carbs for it to change it and neither one works. Put old carb in it will start. Do i need to adjust the new carbs some how?

Thank you for showing me how to do this. I got a Lance PCH 50 recently and, after a bit of trial and error figuring out how to ride her (which involved laying her down a couple times, to my shame), I ran into the problem of fuel leaking into the air filter. I was told that it was a carburator problem by some friends and I've been totally afraid to mess with it to clean it or adjust the float. I've read and watched things that showed me the different components, but nothing that showed me how to take it out - which is the part that scared me a little bit until you showed me how easy it was. If it turns out not to be a carb issue, where would I look next?

@IFixShet

10 ай бұрын

Valve lash 😉

I need some help figuring out why my scooter blazed Wolf will not start, and if it does, turn it idols and then shuts off. It worked and never gave me problems till one night a couple of months back. It just stopped working all the lights went off In the middle of the street, I pushed it back home luckily.I thought it was the battery. I bought a new battery. It still don't wanna come on. My air filter hose that's on my carburetor has a little crack in the seal. Will that keep it from starting and staying on?

My SYM carburetor scooter over half year that engine does not working in Taiwan! After I push scooter start motor switch and then I got some situations as below: (1) engine cylinder pressure is 126psi (2) spark plug has flash (3) fuel tank does not working to push gasoline via fuel filter out? Do you have some idea to help to fix my breakdown SYM scooter here, thanks!

Engine # is on the left as you look from behind? I found the TAG that says " motor ", and assume the number showing ( yn50qt-8 ) is the correct number. If this is true, then you are wrong... My number was on the right side, as you look from the rear towards the front.. I spent a few minutes looking on the left. I have a bintelli spark, and want a new carb.. Thank you for getting me started in the right direction.. Clutch 1st...

I have a Wolf 150 and the last 6 months, it will stall out on every stop light for the first 15 minutes of the trip. Every time I let go of the throttle it wants to stall until it gets warmed up. I adjusted the idle and it still does it. So I'm figuring it's the carburetor. I was gonna take it apart and clean it, but for under $40, you're saying I can replace it with a brand new one? Seems way to easy!! That might be my route. Thanks.

@IFixShet

8 ай бұрын

Yes

Great vid

@IFixShet

2 жыл бұрын

Thank you I make videos all the time to show you guys how to repair your Chinese scooters if you haven't subscribed I suggest you do that especially if you own one

@mike-Occslong

2 жыл бұрын

@@IFixShet yeh iv just subbed. Ive recently bought a 50cc tapo..i dont know if your vids will help with tht? i have no clue bought bikes cheers. Do u fix scootera for a livin?

@IFixShet

2 жыл бұрын

@@mike-Occslong I buy fix and sell motorcycles and scooters for a living I've pretty much worked on everything

@mike-Occslong

2 жыл бұрын

@@IFixShet wow thqtw awesome mate id to be able to do tht where bouts are you based?

@IFixShet

2 жыл бұрын

@@mike-Occslong Tampa Florida

I have a 2020 Chinese 49 cc scooter Well it started with me having to jump the scooter because starting the scooter killed the battery because it wouldn't start then Everytime I hooked the cables up it will start not was like that for about 4 or 5 days now it won't start at all now what would you think

@IFixShet

7 ай бұрын

I need more information is the battery dead does it not turn over at all is it turning over but not starting?

Is that a vacuum line close to the enricher? When I start my scooter fuel comes out of that. Or maybe an overflow line.

@IFixShet

Жыл бұрын

If it's next to the enricher then it's the overflow and that's normally caused by a sticking float

I'm trying to replace a crank in my scooter this is the third one this week

@IFixShet

Жыл бұрын

Normally when you have crank shaft failure outside of the bearings or the rod is not even causing it to put too much strain on the crank shaft And out of whack rod or piston Can prematurely wear out crank shafts quickly

Ok I watched today. I liked . I subscribed. Sorry to need your help so soon . I just installed my carburetor and as I was “ trying to attach “ the trotted cable the carburetor throttle doesn’t turn. The shaft with the spring? Any ideas of what I didn’t do

@IFixShet

Жыл бұрын

kzread.info/dash/bejne/lJ-Jkrp-hqqfZpM.html

@IFixShet

Жыл бұрын

Join my Facebook group and upload a video for me to see what's going on. It's easier if I have a good idea as to what's happening and can talk to you on a more personal basis it definitely helps withTroubleshooting troubleshooting

I have an adly rt50 2016 50cc motorcycle and it starts only sometimes and smells like gas

Hey man just wanted to know if a new carb needs to be tuned once installed? I’ve read different things regarding that. Thanks

@IFixShet

Жыл бұрын

It really depends on whether it works good with your machine or not if you're noticing it's not running good then you have to adjust the jet size. You Don't want a scooter that's running lean or running too rich

Hey I have a 50cc gator 50SRT I want to put a 150cc carb to make it faster can you help me

@IFixShet

10 ай бұрын

Putting a bigger carburetor on it doesn't make it go faster. Speed is gained through CVT tuning. Throwing more fuel at the engine only gives you a faster take off it doesn't give you a higher top end. You put a bigger carburetor on it then you have a lot of tuning ahead of you that needs to be done for proper air flow And fuel mixture.

Great video, nice and clean. Now an issue I'm having that I could use some help with if possible. I just had to replace my carb on a GY6 50 cc QMB139. Got it in well enough; adjusted the fuel/air mixture for idle etc. However, no matter what I do it will not start unless I start it by having the throttle slightly twisted when I push the starter button. Additionally I have to hold on to the slightly open throttle for about a minute and then the idle starts to increase on it's own. I release the throttle and it seems to settle in at about 2000-2200 rpm and stays there. It is almst as if the enricher is operating in reverse?? Another thing, if I shut it off it will start fine with one quick press of the button if I do so within 5-10 minutes. After that it'll only start if I twist the throttle...please advise.

@IFixShet

Жыл бұрын

Yeah this is signs of The wrong jets. You're not getting enough air or enough fuel on start up

@jgscole

Жыл бұрын

Great video btw and thanks for the reply. Is it typical for a new carb from Amazon to come with wrong sized jets?

@IFixShet

Жыл бұрын

@@jgscole A 100%. You have to understand you're supposed to take the jets out of your OEM carburetor that came on it and then reinstall them in your after market carb. They are just putting basic general jet sizes in the ones that they sell on Amazon in eBay they're not designed for every scooter which is why the jets are changeable. I'm just going to get lucky you buy one install it and all your problems are solved and other times you buy 1 as the wrong jet sizes and then you have to tune your carburetor just like you're having to do now

@bevennmac2195

6 ай бұрын

@@IFixShetthank you. Hopefully you’ll make a video about this and more informations about the jet. 😊

Question..what would cause my moped to start and idle but as soon as I go to accelerate it dies? Is it the carb? Thanks 😊

@IFixShet

11 ай бұрын

Carb needs to be cleaned or replaced. Trying turning your idle up first though

It would require a exhaust modification eventually I guess with the increased fuel burning ??

@IFixShet

Жыл бұрын

Not always

I have the same scooter and bought a new carburetor just like that but the electric choke wires are reversed in the plug. It’s a one way plug but the yellow and green wires will be reversed when I plug it in what should I do? Is it important that the yellow goes to yellow and the green goes to green?

@IFixShet

Жыл бұрын

Try it see if it runs like it is and if it doesn't reverse the wires

Best part in 4:20

I'm thinking about getting this exact model Scooter. Is it something you'd recommend? How is your experience with it? Thanks!

@IFixShet

Жыл бұрын

I mean it's a Chinese scooter they normally last 8 to 10,000 miles and then the engine needs a rebuild

I was wondering if you can tell me how to take off the headlight cover off a 2022 vittaci spark 150 cc.I took off all the screws but i dont want to break it .Are there slots you have to slide up or down ?Someone told me the cdi box is there cuz i looked everywhere and its a clusterfuck to follow the coil wires.help!!ty

Hey man my moped is a wildfire 150cc it will start up after a bit then run for a while riding it then randomly die what could this be

@IFixShet

Жыл бұрын

Most likely a failing CDI Or overheating voltage regulator

I was thinking of putting a 100cc carb in a 50cc engine would I have to take off my air box to run it I also have a filter to connect to carb

@IFixShet

Жыл бұрын

There's a lot involved with giving your engine more fuel you have to do proper carb tuning it's not as easy as just putting on the carburetor and slapping a larger air filter on it and hoping for the best. You will potentially be running rich or lean condition each one of these will have its own effect on the machine if you're going to do this and you don't know what you're doing I suggest bring it to a shop to do carb tuning so you don't burn out your engine.

Are these the same motors on the song fang 50 cc because I want to big bore mine out

@IFixShet

Жыл бұрын

Yes

Hi there so I have the same scooter wolfrx50 and not too long ago my scooter started bogging so when I hit the throttle full it bogs and won’t accelerate the scooter starts up fine and sounds fine just when I hit the throttle it does what I explained right now I’m trying to figure out what’s wrong with her so I don’t know if it could be a carb problem or something else she’s only a year old and only did 5000 miles on her im desperate to get her back on the road what do you think the problem could be ??

@IFixShet

8 ай бұрын

100% carburetor. Replace your carburetor you can order them on eBay or amazon look up GY6 50CC carburetor they're about $20. Chinese carburetors do not last very long you get about 3,000 to 5,000 miles out of them and then they are toast. The reason why is they are not designed for the ethanol content that we have in American gas, they are Chinese carburetors they do not use ethanol fuel in China so the rubber gaskets are not designed for ethanol. This is why you only get about a year out of a carburetor and most times they fail even before that it's good to have a couple of them on your shelf. Also it's time for you to get your valves adjusted you should have done it at 2000 milesYou're probably 3000 miles over your need for valve adjustments this will also cause bogging because the valves get very tight.

@lizmariedavila3797

8 ай бұрын

@@IFixShet mmm got it yeah and once I did 2000 miles I took it to the shop and they did the adjustments to the valve but it probably also needs to be worked on as well anyway but thank you for your response back I really appreciate it so much 🙏

Have you come across a fuel injection one yet all new ones come home in the UK with it I want to do a 50 mm big bore A9 cam the full monty I want to use the 150cc carb if I take off the fuel injection as it got the usual cdi box in it that is what I'M trying to find out before I buy one thanks for any help. Jeff

@IFixShet

2 жыл бұрын

I'm sure there are fuel injection systems out here for these GY6 engines but it would just be too much of a pain in the ass to install when you can just buy a new carburetor anytime it has a problem for $20

@ILikeCheesesticks

Жыл бұрын

Icebear has a fuel injected 300cc trike, I forget the name.

@IFixShet

Жыл бұрын

I would not purchase a Chinese driven fuel injection bike They will fail in a very short span of time leaving you stranded

You dropped line/tube down in through the bottom to the side of the carb and didn't attach it. I have that issue and have no idea where to put that one. I also have a small L-shape tube that has fallen off and I can't figure that one out either. Can you give me some guidance?

@IFixShet

Ай бұрын

The line that goes to the bottom is a runoff in case the float Bowl sticks. It doesn't go anywhere but pointed down at the ground because if the float sticks fuel has to have somewhere to go and you don't want it pouring out all over your engine for chance of Catching Fire. It is exactly where it is supposed to be

@IFixShet

Ай бұрын

An L-shaped splitter is vacuum line connection points

I have the same wolf scooter. I took out the battery to see if it needed a charge and now the ignition button doesn’t work any idea what it could be?

@IFixShet

Жыл бұрын

Check the fuse down by the battery lol

@justinjayaraj3118

Жыл бұрын

@@IFixShet the fuse seems to be fine there’s an extra fuse which I switched to and still nothing. Do you think I could’ve done something wrong while charging the battery or when putting it back into the scooter?

My scooter is ah lanco cabo 50. Won't go more then 15 mph. I just out b12 chemtool in it still won't go passed 15mph. Can u messages me

@IFixShet

Жыл бұрын

That's because it's time to clean the car or replace it. Chinese corporators do not last very long

@uhuru81lamarr

Жыл бұрын

I clean the carb tho

@IFixShet

Жыл бұрын

@@uhuru81lamarr Then it's time to replace the carb. Chinese carburetors don't last long if you're not using ethanol free fuel it eats up all the rubbers inside and creates ethanol damage and then the carb stops working really quickly. They're just cheap little carburetors that's why they're 15 to $20 on eBay

@AdnanDzafic-tw4qi

13 күн бұрын

Bro my scooter does the same thing it goes to like 15 20 kmh and it yust dropes gas or compresion

Where did you get the carburetor from mine's has been sitting in the garage for 7 years I know I have to exchange it where do I get the parts let me know okay

@IFixShet

Жыл бұрын

eBay carbs are about $20

I have a taotao 50 cc scooter. It won't stay running. I've checked the valves, it gets spark but no gas is going to the spark plug. How do I fix that? 2:52

@IFixShet

4 ай бұрын

Replace your petcock and make sure the vacuum drive connected to the petcock does not have a leak.

De obicei carburatoarele noi sunt deja reglate. Eu il reglez dupa 6 minute de functionare (RO).

So nothing bad will happen if I replace a stock 50cc carb with a 150cc one?

@IFixShet

2 жыл бұрын

That's not quite accurate you might run to Rich you might run to lean running rich is acceptable you will foul spark plugs but not great for your machine running lean you will burn your cylinder up and fry your engine you need to tune it properly with proper jetting and airflow this is most likely going to be better done at a shop

Hello. I have a wangye eivissa 2 125cc scooter year of manufacture 2022. I notice you have an air drian filter. I have one on my scooter and its a YT80 WD air drain filter. I have 2 pipe being feed to the bottom of the air filter and one pipe missing. Would you happen to know where the missing pipe goes to as i dont have a service manual for the scooter. Cheers

@IFixShet

4 ай бұрын

I'm going to be honest I've never even heard of that type of scooter before

@alllivesmatter5750

4 ай бұрын

@@IFixShet its Chinese rubbish and it done 2015 miles and its smokes a bit. Its a 4 stroke iron horse and shouldn't be smoking with 2015 miles on the clock. I'm trying to eliminate as much as possible before it has the valve seals replaced. Cheers

@IFixShet

4 ай бұрын

@alllivesmatter5750 yes smoking is definitely valve seat problems. My suggestion is to actually set them slightly loose rather than right on the money with the valve lash.

@alllivesmatter5750

4 ай бұрын

@@IFixShet I was hoping to avoid cracking the head open. Cheers for the help.

would bad carburetor cause my speedometer to stop working: jus subscribed by the way

@IFixShet

Жыл бұрын

Nooo, That would be a speed sensor located at the front wheel

where can i order parts online?

@IFixShet

2 ай бұрын

Ebay, Amazon

My kymko keeps bogging out and back fires and turns of

@IFixShet

Жыл бұрын

That sounds like a timing problem to me or a carburetor gas air mixture issue

Hii..man I need help please

@IFixShet

10 ай бұрын

OK how would you like me to help?

Brother I need help with my rx50!!

@IFixShet

7 ай бұрын

Ok, what's up?

@Picorico2X

7 ай бұрын

I’m reviving my rx50 after after it was stolen and hotwired and sitting for like 2 or 3 years . CURRENT QUESTION, How do I clean the carb , or should I just upgrade it because I was planning on adding a bbk 70cc cylinder ? 0:03

Flush Out the Gas Tank when installing a new carb. Thas why im here. New carb got clogged from Gas Tank Debreee.

My carb is kinda on the side of the scooter

You need to man up and get yourself a Dewalt drill/dewalt impact and throw that drill directly in the trash and also let moter warm up for 5 minutes before making any carb adjustments

Can u help me wit my scooter plz

@IFixShet

Жыл бұрын

The Official I Fix Shet Facebook page To ask questions and Receive help or just partake in the group activities facebook.com/groups/631191488517301/?ref=share_group_link