Repairing a DEAD Game Boy Pocket [Part 1]
Ойындар
And then they realised, they were no longer Game Boys: they were Game Men.
▶"Repairing" the silver Game Boy Pocket: / 47236779
▶SUPPORT on Patreon to watch videos like this early: / mattkc
▶FOLLOW on Twitter: / itsmattkc
▶FOLLOW on Twitch: / itsmattkc
▶FOLLOW on Instagram: / itsmattkc
▶Features the following videos
"Restoration and repair of a DEAD Game Boy Color" - MattKC
• Restoration and repair...
"Tech Quick Tip: Gameboy Advance Power Switch Repair!" - The Broken Past
• Tech Quick Tip: Gamebo...
▶Music used
CORE - mr spock's cryo-bed
DualTrax - orion crackmusic
BRD Keygen #4
xyce - sea side blues
BRD RinjaniSoft Products Universal
dr. simplicity
DualTrax - Shitune #1
4-Mat - eternity
BetaMaster - QuickTime Pro 7.0 kg
Пікірлер: 748
Those pixels lost their capacity to twist the liquid crystal inside of them in order to change the orientation of light that passes through them. Thats how you polarize light so it wont pass through the filter layer, which makes the black pixels. In short, its dead.
@paliszarok
2 жыл бұрын
deez nuts
@DemeDemetre
2 жыл бұрын
backlight mod?
@CreeperPookie
2 жыл бұрын
it's*
@paliszarok
2 жыл бұрын
@@CreeperPookie It's* ratio + didnt care didnt asked + quote tweet + cancelled
@Xnoob545
2 жыл бұрын
so it's like dead pixels on a regular screen right
No matter how exhausting your day, seeing my favorite Discount Markiplier and Lego Island-afficionado work some tech magic with his soothing commentary, always manages to brighten my day. Thank you for the entertainment, sir!
@Sarah-hs8ir
2 жыл бұрын
Or is markiplier a discount MattKC? 😏
@HedenCop
2 жыл бұрын
My car literally lit on fire today but today is still a good day bc Matty-boy posted
@blueghost312
2 жыл бұрын
dude this is my first MattKC video and i deadass thought he was Markiplier
@ulisesrl0
2 жыл бұрын
ahh is it a good day when discount markiplier with a dankpods accent uploads a video or what⁉️
@lutterbrot5839
2 жыл бұрын
@@ulisesrl0 You know it brother, high five!
That LCD is dead, Jim. You usually see this in cars where the cold/warm cycling + humidity does a number on lcd panels.
@katsumiskytower8714
2 жыл бұрын
lcd screen cancer, its a mold that grows between the glass panels inside the screen :/ BUT! theres TONS of aftermarket screen kits you can upgrade with no problem, turing this pocket into a gameboy light!
@Chriva
2 жыл бұрын
Lol. It's anything but mold or cancer :P It's caused by microcracks in the glass panel itself or a bad seal between the two glass panels. air and/or water is all it takes to prevent the chemicals in those things from working. :)
@willywally5997
2 жыл бұрын
@@Chriva its also caused by magnetism and other things, but the essentials of it is that the lcd pixel is stuck, you can massage the lcd to fix them. as that usually unsticks them in that position
@krazycharlie
2 жыл бұрын
To boldly go where no MattKC has gone before...
@josuemendoza5358
2 жыл бұрын
This thing is cause by polarized film. This problem is common among gameboy pockets, just replace it and you are good to go
I'm not missing out on education-aiding sleep. This IS my education.
@paliszarok
2 жыл бұрын
you are missing out on DEEZ NUTS
@shuumo453
2 жыл бұрын
@@paliszarok wtf
@T3CHNOM4NCER
2 жыл бұрын
@@paliszarok u Sus 😑
@spamspace6878
2 жыл бұрын
Same
In the user community they tend to call this mark on the LCD "leakage" or "screen CANCER." They might be on to something... Something that sadly can't help the faulty screen itself. Also if you put the backlit screen, be aware that the power regulator is taxing itself quite a bit coupled with the small batteries. So even if the Pocket is stable after the screen mod, battery life will be absolutely wrecked.
@gluttonousmaximus9048
2 жыл бұрын
One of my Pocket units had something like this on the edge of the screen... which just disappeared after a few days of use. The "cancer" talk is only getting weirder.
@twentysixbit
2 жыл бұрын
Is it possible to reduce power draw in any way to counter that?
@partycatplays
2 жыл бұрын
@@twentysixbit Not really - backlighting is quite power intensive, especially in such a small space where you can't use some of the techniques used by larger displays like edge-lighting
@twentysixbit
2 жыл бұрын
@@partycatplays Perhaps he could replace the battery terminal with a custom 4 slot? Do those even exist
@partycatplays
2 жыл бұрын
@@twentysixbit that could be an option. Haven’t looked into it.
Tip for future desoldering: Be more generous with the desoldering mesh! Don't only work with the tip of the mesh. If you use the middle of the mesh, it can absorb the solder in two direction instead of only one ;)
@drewconley6444
2 жыл бұрын
I find putting flux and solder on the mesh first helps significantly.
@coryrabbit
2 жыл бұрын
@Clarissa 1986 I don't know. Back when I was first learning to solder, I absolutely roasted some components, and they still worked. I don't recommend it, but they can handle some pretty serious stupidity. Lol
@kayakMike1000
Жыл бұрын
Flux. More flux
@MrRelentlessFun
Ай бұрын
I drip liquid Flux on top. They make braid with Flux embedded I think. 🤔
Not sure if anyone has commented this yet but it looks like to me that the LCD itself is damaged. The pixels themselves have somehow been damaged and when that happens with LCDs there is no saving them, it’s just e-waste now. Sorry.
@thetoythief8940
2 жыл бұрын
Thought the same
@goofygoober7183
2 жыл бұрын
At this point, just buy a lit up screen and throw it in
@myrealusername2193
2 жыл бұрын
Yeah I would say just replace the screen
@TheGrayWolf81
Жыл бұрын
Luckily the Gameboy is not e-waste thanks to the modding community. I just wish someone would make a replacement b&w LCD the same or similar to the OEM display to keep everything feeling original.
@Xnoob545
Ай бұрын
Why is it not possible to cut it up into multiple parts, and fit an a small section from a different screen (but of exact same type)
I've seen marks like that in old black and white LCDs before, and even some new ones after they've experienced a physical shock (been dropped, etc). So maybe it's some kind of damage to the LCD itsself cause by physical shock?
@archivushka
2 жыл бұрын
The crystals can't twist here anymore, that could be anything Some people say it's because of humidity, or more believable rapid temperature changes
@egesanl1
2 жыл бұрын
Had the same ishue when i pluged 9 volts to a lcd by mistake. There is not much that can brake in a lcd screen. So that is what you most likely get when it gets damaged.
@__MR.MAN___
2 жыл бұрын
That's literally what happened to me last month. I commented this already, but I recently dropped my near perfect GBP and it created a few of those marks..
@myrealusername2193
2 жыл бұрын
Yeah it’s basically dead pixels
@Clavinohou
2 жыл бұрын
Have i met you on instagram before?
I'm glad you took apart the switch to clean it and make it work. The whole time I was like "just clean it!" I had to fix a PSP like that once
I've normally experienced that kind of damage on LCD screens when they're exposed to shock, it's happened to a few of my multimeters, doesn't show straight away happens a few months to a year after the impact, it's like a microfracture that just grows a crystalline structure over time especially in cold conditions, sometimes by warming up the display to 60-70°c the marks will go away but then they reappear after a couple of weeks to a few months later.
In my experience, moving parts such as switches are the first things to break, because the contacts get gunked up and corroded. This actually good news cause it’s pretty to easy usually, just clean it really well, you can buy anti corrosive contact spray, which is really useful.
@VexAcer
2 жыл бұрын
Yeah my childhood GBA SP would sometimes turn/flash red even though it's fully charged or shut off randomly, even after putting in a new battery. It turned out to just be the power switch that was dirty on the inside. It's actually a pretty common problem with them over time.
@robertpucovsky
2 жыл бұрын
Or just use alcohol. A drop of some and repeatedly switching the switch should clean the contacts enough
A dirty switch is pretty common in GBAs as well. Sometimes, you don't even need to take it apart (the switch), just spray some IPA inside and keep moving it for 1 or 2 minutes.
@michaelarmer256
2 жыл бұрын
@@Stupetin helps you forget its broken?
@armeli
2 жыл бұрын
@@Stupetin I might be a bit thick headed here but just in case you were being serious. IPA in this context means Isopropyl Alcohol :D
@dwlang001
2 жыл бұрын
Came here to post this.
@Madnessnunky
2 жыл бұрын
I fixed some switches (toggle buttons?) in an old amp with WD-40 and a generous application of "pushing them all really fast". The buttons hold position and don't shut off any more so I guess it worked. Surface corrosion and/or dirt can really mess with old tech, so simple maintenance like that can save a ton of work and part swapping.
@xplore7359
2 жыл бұрын
This lol
I'm a complete newbie to this stuff and I managed to fix an old NES power switch by just taking it apart and cleaning it. That seemed way easier than trying to replace it!
Can't wait for part 2! This is already an interesting journey!
Im, really glad that people like you make these videos where it seems to be unrepairable but end up repairing it This videos pbly helped at least one person and it makes me happy
@MattKC Thank you for making these videos. You've motivated me to self repair my broken hardware, and thanks to that my XPS 13 laptop and my ZOOM audio recorder live to be used another day!
i'm always hyped for a new MattKC video, especially of this sort
I can’t wait for part two! I love seeing old stuff restored
I just found your channel yesterday with the new video about PS2 and I gotta say, your content is gold. I never knew I needed this content until now...
Matt you're an absolute gem, can't wait for part 2!
this is the MOST technical video of a gameboy restoration, well done!
So rare to see someone fix up the Pocket. This is the video I've been waiting for. Really curious to see if you make any upgrades!
Awesome video as always, Matt!
I love 3:36, "NOOOO! NOOOOO!" Great video, you never fail to make anything you do interesting. For the future, I'd recommend a product called Deoxit D5 for something like the switch. It's a contact cleaner that also has a lubricant. It removes corrosion really effectively and protects it afterwards. My theory on the LCD is that the crystals might have been damaged from an impact or something. I've seen something similar on a surface pro screen before.
@qwerty_studios
2 жыл бұрын
how did you make a comment two days before it’s released?
@NicolasHanna
2 жыл бұрын
Ummm 2 days?
@qwerty_studios
2 жыл бұрын
@BrutalGoober oh thanks
@cbeomjun
2 жыл бұрын
@BrutalGoober no. Time travel.
Love you Matt can't wait for part 2!
Always so glad to see your videos! Thank you for making them
You were in recommendations and I’m hooked I csnt wait to tune in more
I love your work when I am tired seeing you work melts me to sleep
Fantastic video! Never seen an LCD do that. Can't wait for part 2.
Matt, thanks, I had a hard day, this upload makes things better.
This Gameboy video turned me into a Gameman.
@archivushka
2 жыл бұрын
Strangely, this channel has not that much patreons. Surely we can change that
Long story short, these black marks is what is referred to as "LCD cancer" and they appear when the two layers of glass get some space between them for one reason or another and the Liquid leaks from where it should be to that space. This is basically non-repairable no matter how you think of it, and removing the polarizer was a huge mistake.. The reason I say it is a huge mistake is that when you peel it using force (like you did) you're doing 2 bad things (in addition to peeling to totally fine polarizer that is): 1- you are exerting a force that will definitely make that empty space between the layers of glass get larger 2- you will definitely (sooner or later) get even more black marks around the edges of the LCD as the force you exerted is basically applied not only on the polarizer, but also to the layer of the glass beneath it, thus forcing it to separate from the other one. So.. in conclusion, never do that. If you see a screen with this "LCD cancer" thing, my advice is: take it for what it is if you want to keep the authentic old looks, or just get yourself a backlit IPS LCD and mod your GBP.
@qactustick
2 жыл бұрын
If it's an irreparable problem, I don't think taking the polarizer off is really going to make things worse. Under the assumption that the screen wasn't going to be put back in anyway, it seems like a good opportunity to take it apart to try getting a better look at it!
@woobgamer5210
Жыл бұрын
the main worry is the lcd leaking onto his hands and doing some skin damage
I recently got a game boy pocket missing it’s switch (no clue how you even lose the switch) and this video saved me a lot of time of just realizing without an original switch I’m screwed so thanks for that
I can't describe it but your videos are like no other, I always enjoy the stuff you make. I could probably watch you repair something as stupid as a microwave and it would still be fun to watch.
Hey Matt, Thank you so much for uploading this. My GBP had a different (very random) issue, but I was basically checking any toturial out there for any tips. I saw your trick on bridging the power switch and did that too to lower the complexity of my repair. This seemed to have been the issue on my unit though: very bad connections on the power switch. I reflowed everything and now my GBP is back in working order! Thank you!
awesome video!!! can't wait for part 2!!
im always so excited when you upload a new video.
legend is that matt is a tech resto god
I repaired a gbc with help from your videos, thanks for sharing your videos; good vibes from Mexico ;)
I'm glad you leave in your mistakes. Helps new people realize that it's just part of the game.
These kind of damage to the LCD is called „Screen cancer“ and it renders the screen useless. I had this on my Pocket too
So here's the thing, the first thing you should do with broken Gameboys when you repair them, assume the switch needs to be cleaned or replaced, that is one of the weakest and first things to get dirty
@ismattkc Thank you for making these videos. You've motivated me to self repair my broken hardware, and thanks to that my XPS 13 laptop and my ZOOM audio recorder live to be used another day!
Haven't even watched it yet but I know it's gonna be a banger
Was screaming all the time: “just clean the switch” 😂 Thankfully you found out in the end. Switches only stop working because they either get dirty or corroded (common) or due to a shortcut (uncommon). Also for SMD components I highly suggest a hot air gun and not a solder iron.
very entertaining video! A few specific tips tho: -Desoldring with desoldring wick can be easier if you actually tin the wick first, and use a liberal amount of flux on both the wick and contacts on the board (flux can easily be cleaned off with alcohol and cotton swabs, so there's no need to worry about overdoing it) The board can always be dowsed with alcohol and scrubbed with cotton swabs to get debris and baked on flux off, and the alcohol will quickly evaporate leaving a clean board. -For desoldering smd components like that switch, however, it can help to have a combination desoldering station with a hot air reflow tool, as that lets you liquify a large section of solder at once, while the components should stay in place due to surface tension (as long as you don't have the fan in the reflow tool too high and too close that is). They're not that expensive either! I think I got mine for under $40, and if you do even a mild amount of electronics tinkering you'll thank yourself for getting it. -For removing adhesive easily with no fuss, I like to use goo gone. It's a super effective adhesive remover that uses citrus oil, so it smells very plesant, and adhesives can easily be wiped off clean with a dry or damp paper towel. It breaks down the fatty structures in adhesive, but isn't abrasive like acetone, which can actually ruin some plastics (like cd jewl cases for example). Goo gone can also be cleaned off with isopropyl alcohol and swabs. -I know it's not the particular problem your screen had, but it can sometimes help with old non-backlit lcd's like this to hit them with a bit of heat and see if that fixes the problem. The original brick DMG gameboy is notorious for loosing entire lines due to solder inside the screen loosing connection, and massaging the glass careful near the ribbon with an iron, or hitting it with a heat tool in place can reset the solder connections and fix it. Just don't overdo it obviously as this can damage the components just like anything else.
Love your work brah!
In the past I've used contact cleaner to "fix" dirty switches without removing them or disassembling them. Just spray it in and actuate the hell out of the switch. I like the non greasy contact cleaner because it leaves no residue but both types are o.k. It works 99% of time. As always, great video! Everybody loves parfait!
when matt uploads a vid: a month has passed when he uploads in less than a month: IMPOSSIBLE
Dude thanks so much for this video. I had this exact problem and cleaning that switch fixed it.
I look at the thumbnail. I immediately see screen rot. This is gonna be an interesting series.
I got notified three times on my KZread app. This better be good òwó
I love the videos. Subscribed 🤙🏻
really enjoyed the part where you fixed the gameboy
I have seen similar marks on a GBA SP NES Edition. They seem to have been caused over a very long time by the heat and humidity of the tropic. At first these resulted in shifting of the angle of maximum visibility, and inverted colors. Now there are many dead pixels that look as if they had been ripped off the screen, at the areas where the damage is more concentrated.
Isn't it weird how back then knowing a ton about computers and that would be considered a nerd but now you would be a legend
My Ti-83 too suffers from that weird mark, I have no idea what it is but the device still works. Other than that, you are one brave man to fix your GB Pocket's switch like that.
Nice, a new video! Why am I writing this when I can just watch it now?
Mattkc videos are so cool!
So quick tip on those old TN LCD panels. _IF,_ and that's a big "if", you could get the outer protective layers of that screen apart, you can sometimes _massage_ out stuck pixels like that. It works on old PC monitors with stuck pixels, but those older TN panels tended to be kind of squishy, unlike the hard plastic on that gameboy screen. It is possible that you maybe could have massaged it straight through the plastic just right to get it, but I think that particular screen was done for. But, it you ever have an older TN LCD panel (especially color ones) with just a couple of stuck pixels, you can usually massage them with your thumb and get them unstuck. It's like that diagram shows, the pixels are turned on and off by those ladder-like structures twisting and untwisting, and sometimes they get hyper extended straight and cant twist back up with just electrical power, they literally need a little bit of physical force to nudge them back into a pliable shape! So if you have an older TN monitor or TV and you notice bright dots whenever the image is black, give that sumbitch a nice rubdown with your thumb!
It's okay, I use the flossers too. Holding regular floss sucks, and better that you're actually flossing than giving up because regular floss sucks so bad
This channel is freaking awesome 👌
I'll watch this later today when i'm eating lunch.
@sphinx2077
2 жыл бұрын
Me too
cant wait for part 2!
MATTTT KKKKKKKKKKKKKKK CCCCCCCCCCCCCC IS BACK BOISSSSSSS
babe, new MattKC video dropped
cant wait for part 2 :)
yay mattkc uploaded!
Haha, yeah. That was the exact same issue I ran into with a GBC. Glad I left the review up.
@The1lluminado
2 жыл бұрын
Amazing, literally exactly the same fix I had to do like a month ago, but for the GBC.
Post moreeee you’re videos are too good
Nice video as always :)
Nice video! 👍🏻
Tip about the polarizer. It's comes off way easyr with warm water and a paper towel and place it on the screen and leave it on over night.
I live in the same country as yourself. When you stated finding a dead gameboy for cheap! Lucky. Even faulty ones are ridiculous in price. The industry has changed
Just found a video by "Hey! It's Andy" that fixes those dead pixels It's called "Dead Pixels and How Gameboy LCD screens work - The Epilogue" I just got recommended that video and was immediately reminded of your vid. Maybe try this out. In short, he said, that the crystals in the display may be oxidised and are therefore not conducting anymore and that may be why they are "dead". The fix he had, was to use a q-tip and kind of massage the dead pixels out. So scrub with the q-tip and force for a while in different directions over the dead pixels. But make sure to put something behind the screen to not damage it.
@mariomatschgi344
2 жыл бұрын
The link to the video: kzread.info/dash/bejne/en-KlNqfiqXRfdI.html
Just watched this on 2x at midnight, picked up the main points. Hell yeah investigate that defunct screen some more, maybe try use heat to peel the compacted layers? Hell you have a replacement so even if the investigation makes the old screen useless it's still going to be an interesting search
Thats a common issue with dirt in the gameboy if you put ipa in the switch and turn it on and off a few times it fixes it, you dont even have to open it
"you can see the mark at some angles" Someone else has likely pointed this out already, but the reason this is, is because when light reflects off a flat surface it often gets polarized in some direction relative to that surface. That's why polarized sunglasses are recommended for people on boats (water surface).
I've seen screens with similar issues but I do remember there being a fix, but it's not fool proof. Just use a heat gun on low setting to get all the liquid crystals to go liquid and then cool.
Crazy that parts for it are still mass produced^^ Now thats right to repair
I FRICKIN' LOVE YOUR VIDEOS
I actually have a modern 3.5" composite "rear view camera" monitor that had very similar damage to it. at some point, there was an impact on the LCD panel itself, damaging the crystals/matrix inside the glass layers. It still worked fine, but had visible dead spots just like yours.
the "subscribe to MattKC" thing at the end always catches me off guard
Just a random trivia i found out, a ds lite switch from aliexpress works on the gbc. Sure it technically is a momentary switch but the weight of the gbc plastic slider keeps it in on position.
This is fascinating!
Matt I am running out of videos to binge I’ve watched the windows 98 laptop video like 4 times now
I had a similar issue with a switch on a tape deck I repaired, where bad contacts meant that the audio signals weren't being passed through the switch
Definitely liquid crystal damage. Also means it’s unfortunately unrepairable. But good thing you were smart and thought ahead and got a replacement. :D
The pattern of dead pixels looks amazing
It's December and still waiting on the part 2
The switch issue made me think about Fantastic Quacks videos. I does these videos where he tries to repair consoles, without new parts.
MY gums hurt watching you floss. 👀
"in fact one of those scratches forms a name" comedy gold.
My kneejerk reaction was to print the dark part of the switch with extended legs, didn't expect the original to just need a clean!
As others have said, yeah that LCD is dead, could be a blown pixel with the liquid part bleeding over the divisions of the matrix, something pretty common on calculators
Yay you uploaded!
I usually prefer to buy systems that are just dead, as in they don't power on according to the seller but don't have any obvious visual damage etc. most of the time it's the matter of changing a battery or something simple, or in the case of my Game Boys it's often just a flaky power switch that just takes a bit of cleaning. Much cheaper than buying replacement screens and things like that
@HKlink
2 жыл бұрын
I desperately want to believe that nobody would sell a dead Gameboy that can be revived with new batteries. Surely people can't be that stupid.
@oswith971
2 жыл бұрын
@@HKlink No I was talking more along the lines of a nintendo DS or something, I bought one that just needed a fresh battery. But I have bought a GBA SP and a GBC that both started working simply by spraying alcohol into the power switch and wiggling when they were initially listed as not working
@UNSCPILOT
2 жыл бұрын
Handy advice to keep in mind, thanks!
He back moment!
Are you guys ready to wait a whole year for part 2?
Hello! Love your vids!!!