Repaint a Toy Mandalorian Blaster Prop
Тәжірибелік нұсқаулар және стиль
There are few things more iconic in the Star Wars universe than the weapons and in this tutorial I'll break down my approach to repaint a Star Wars blaster prop using a Rubies costume toy version of the Mandalorian's blaster.
Inspired by these videos:
Coregeek - • Shiny! Chrome Graphite...
Punished Props - • SHINY! Graphite vs. Me...
Wesley Treat - • Make Anything Look Lik...
00:00 Introduction
00:23 Prep & Base Paint
01:17 Graphite Application
02:45 Faux Wood Grips
04:14 Airbrushing Aluminum Lacquer Paint
04:34 Applying Rub N Buff (Pewter)
05:26 Applying Rub N Buff (Gold)
06:04 Adding Grunge with Wax Paint
07:21 Final Touches with Spices
08:08 Wrap up
BECOME A SUPPORTER!
Do you enjoy our episodes? Do you want a behind the scenes look and more? Consider supporting us on Patreon and help us make even more tutorials! / vanoaksprops
OFFICIAL VANOAKS PROPS MERCH:
shop.vanoaksprops.com
MATERIALS & TOOLS:
----------------------
Mandalorian Blaster - amzn.to/2VH4BKE
Heat Gun - amzn.to/3lJGxlK
Cretacolor Graphite Powder - amzn.to/3mFWgTk
3/4” Mop Brush - amzn.to/2JCdSRM
1” Painter’s Tape - amzn.to/3mz6Z21
6mm Masking Tape - amzn.to/3mz7clP
X-Acto Knife - amzn.to/3lE03iS
Chip Brush - amzn.to/3g6ziCw
Paasche Talon Airbrush - amzn.to/37w0bMd
PAINTS*:
----------------------
Filler Primer - amzn.to/3lHaO3Q
Matte Black Spray Paint- amzn.to/37wDdVs
Crystal Clear Satin - amzn.to/36BRmRH
Satin Warm Caramel - amzn.to/2JKIUqB
Minwax Dark Walnut 2716 Wood Stain - amzn.to/39GIqfO
Alclad II Aluminum - amzn.to/33EYfzU
Rub N Buff Pewter - amzn.to/39FOmWE
Rub N Buff Antique Gold - amzn.to/36AHdoC
FolkArt Wax Paint - amzn.to/3jz30WD
SEE OUR PAST MATERIALS LISTS:
www.amazon.com/shop/vanoaksprops
INSTAGRAM: @vanoaksprops
DISCLAIMER: Links included in this description may be affiliate links. If you purchase a product or service via the links provided above I may receive a small commission. There is no additional charge to you and it helps to support this channel!
DISCLOSURE: Please be advised that Plaid Enterprises, Inc. has compensated the artist by furnishing Plaid product at no charge in connection with this video.
#starwars #tutorial #themandalorian #thisistheway #VanOaksProps #plaidcrafts #plaidfx
Пікірлер: 120
Bravo! Great tutorial and the finished product looks fantastic!
@VanOaksProps
3 жыл бұрын
Thanks, Brian!
@whitemando5972
3 жыл бұрын
Yes yes ^
@garsofficialyoutube3915
3 жыл бұрын
Hi smugglers room I am a big fan
that powder is some kinda magic🤯
@VanOaksProps
3 жыл бұрын
Yeah, it's crazy good. Messy, but crazy.
Wow, great and detailed tutorial. Especially love the wood grain technique.
Looks great.
I would’ve never thought to use spices for rust, that’s genius!
@VanOaksProps
3 жыл бұрын
Definitely a good option if that's all you've got on hand.
I’m amazed how well you make plastic look like wood!
Thank you so much for posting this. Just made a start this weekend on my kid's Mando rifle, based on your walk through. Should look great, when done.
Awesome sauce! Excellent tutorial.
@VanOaksProps
3 жыл бұрын
Thanks so much!
Looks FANtastic! thanks for the info!
@VanOaksProps
Жыл бұрын
You bet!
What a difference. Great job on this prop.
@VanOaksProps
3 жыл бұрын
Thanks so much! For being a cheap toy I'm really happy with how it turned out and will be displaying it proudly with my other blasters & lightsabers.
Really fantastic!!!
@VanOaksProps
3 жыл бұрын
Thanks a lot!
You've been very helpful 😉, I've been following your video, it's perfect..thanks
Thank you, Van Oaks! This is super helpful in getting a great, realistic looking prop!
@VanOaksProps
3 жыл бұрын
You bet!
This is spectacular!
@VanOaksProps
3 жыл бұрын
Thank you, Marcus!
Nicely done! Turned out great.
@VanOaksProps
3 жыл бұрын
Thanks again! I really appreciate you sharing your techniques.
Thank you so much for this! I’m going to try and upgrade the white and orange blaster rifle for my son!
Awesome!😁👍🏿
Just bought this prop I will be doing this step by step. Awesome job
@VanOaksProps
2 жыл бұрын
Good luck! Let me know if you have questions
As always fantastic. This is the way.
@VanOaksProps
3 жыл бұрын
Thanks for watching!
Wicked job!
@VanOaksProps
Жыл бұрын
Thanks!!
That is freaking amazing! Thank you for the step-by-step clarity and for letting us know what paints and materials you use.
@VanOaksProps
3 жыл бұрын
Absolutely! Thanks for checking it out.
I recommend weighting guns buy taking them apart, filling with nails and pouring epoxy on top.
Your so fun!! I have been making a blaster for my Rocket Cosplay. I might change it and use some of these tips, this was much easier than my crazy painted details! I love that handle!!
@VanOaksProps
3 жыл бұрын
I love that!
SO good, Derek!
@VanOaksProps
3 жыл бұрын
Thanks, Charlie!
Your tutorial was the best. Mine turned the awesome!
@VanOaksProps
2 жыл бұрын
Thanks! Glad yours turned out well!
Nice work and cool seeing your Star Wars side!
@VanOaksProps
3 жыл бұрын
Thank you and thanks for watching!
Awesome video!! For others like myself that are doing this, and want to add some weight to the light plastic prop do what I did: I drilled a small hole in the back of the handle area and used a small funnel to fill the body of the blaster with fine grain hobby sand. You can get this at Hobby Lobby or other crafting stores. After shaking the blaster and adding more sand a number of times, till it was completely full, (u don't want empty pockets of sand that shift when you handle the blaster so fill completely), I filled the hole I drilled with metal puddy. I also used metal puddy to fill any unwanted groves in the front and back of the handle body as these areas had pockets that looked odd to me and had a seam line that needed sanding anyway. I then sanded it all down and went with the primer and painting process in this video. My blaster weighs like an actual gun and doesn't feel like a light weight plastic kids toy any longer! Hope this helps others, and I'll see you at a comicon somewhere off world!!
Cool
My go to spice is paprika! Love using spices on props.
@VanOaksProps
3 жыл бұрын
Love that!
Just got the blaster today I painted it black now I doing the rest tomorrow
Very nice! If you want a high reflective finish with Rub-n-Buff, don't use a gloved finger. The natural oils from your fingers actually helps during the buffing process. Great job on the repaint!
@VanOaksProps
2 жыл бұрын
Thanks for the tip!
I love weathering props. It's the make or break point for me. I use burt umber , black,dark red and cad yellow water paint thinned with quick shine floor rejuvinatior. Can just use water as well if your sealing afterwards. I don't deal seal with the rejuvinatior. Some water colors are semi transparent, that is what you want sometimes. Also I use real dewaxed garnet shellac on faux wood parts. It creates a depth that is magical if you french polish then distress it.
@VanOaksProps
3 жыл бұрын
Thanks for the tips!
Another thing I suggest doing (on top of this already outstanding work) is maybe drilling a hole in the barrel and possibly in the bottom of the handle and putting in an aluminum or steel rod to give it that extra weight. Obviously, if you were to do the handle as well, you would of course need spot putty to fill the hole in. Great work!
Great video and following along this weekend. Just clear coated (Both black and clear were Rustoleum) and I got crazing on various parts of the gun. Been the most frustrating aspect of my Mando build on other parts as well.
@VanOaksProps
Жыл бұрын
Typically, I've found that any unwanted interaction with their paints is a result of it not being completely dry before applying the next layer OR applying the clear too heavy. Unfortunately the only solution is sanding it down and starting over.
@decryption69
Жыл бұрын
@@VanOaksProps I totally agree and thank you for the response. Will allow a day in between each step. Or at least a few hours of drying.
Crazy how much this episodes background looks like the latest Mandolorian episode.
@VanOaksProps
3 жыл бұрын
Right?! It's amazing to see in person. Feels very alien.
Awesome shot at the end. You'd never know it was Rubies
@VanOaksProps
3 жыл бұрын
Thanks. Yeah, I was really surprised at how good a job they did on it. I believe it's 1:1 scale and aside from being hollow (which I remedied by backfilling with resin) it's a great piece.
Love how the video started off with I'm doing sanding off screen.Maybe we need a stunt double. I know - I hate sanding!! This prop just turned out fantastic but I would be weary if you take it outside of the house.You may need your Carry and conceal permit. That looks so sweet.
@VanOaksProps
3 жыл бұрын
Yeah, no one wants to watch me (or anybody for that matter) sanding. Best believe I had the thought that someone may report me while we were filming.
Never seen that graphite method and I was extremely surprised
@VanOaksProps
3 жыл бұрын
Yeah, it’s very easy and has great results.
Awesome job, was easy to follow along, I did want to ask what kind of clear coat did you use?
@VanOaksProps
2 жыл бұрын
Thanks! I used Krylon satin crystal clear.
As a multiple revolver owner, I have to say that the brightest and least rusty area will be the straps at the grips. Every time you manipulate a gun, you grab it by the handle, right? That should have been hit with Rub N Buff, not rust. Generally, a very convincing conversion.
Very creative video. You're one prop closer to making Han Solo frozen in carbonite
@VanOaksProps
3 жыл бұрын
Ha! Thank you. This is a very true statement, especially now that my 3D printer is up and running again.
@TheHauntedManor
3 жыл бұрын
@@VanOaksProps I also absolutely loved your closing shot. Perfect way to end it. You should keep using landscape scenes matching the Star Wars environment your prop is from in future videos
@VanOaksProps
3 жыл бұрын
Yeah, it was my favorite of all the "hero" shots. Vasquez Rocks, where we filmed this, is such an amazing place it's hard to choose what to film/photograph there. So we just tried a bunch of different stuff and luckily got some good shots (it's really bright out there and was hard to review footage).
Turmeric? Looks like Sansanna Spice to me...! Great job!!
@VanOaksProps
2 жыл бұрын
Ha! Thanks!
This is great! You sound just like the Happy Trooper lol
@VanOaksProps
3 жыл бұрын
Thank you. This was a fun one off and I'll be back to my usual self next week.
Gotta love the copyright-free soundtrack. I'll call it "Babysitting Bounty Hunter."
@VanOaksProps
3 жыл бұрын
Hahaha!
Thanks for the video!! Are you just using a hairdryer to speed up drying?
@VanOaksProps
3 жыл бұрын
I'm using a heat gun on it's lowest setting (which I don't recommend on 3d prints), but a hair dryer would work as well.
Hey, love the video. My son and I are following it step by step. One question: for the wood grain effect with stain, how long did you wait to clear coat it? My stain is still tacky after a few hours, and I’m wondering if this is as dry as it will get
@VanOaksProps
Жыл бұрын
I’d give it 24 hours to dry. Then you can clear.
❤❤
Did you spray it down with clear coat in between applying the silver and gold rub and buff> just wondering if the silver pulled off when you removed the tape.
@VanOaksProps
3 жыл бұрын
No. I just applied each one. Because it’s a wax and I applied a light coat of the silver and really worked it into the surface it wasn’t affected by the tape.
"Spices will do in a pinch" he says! Da man has jokes!
@VanOaksProps
3 жыл бұрын
Glad somebody got it. Haha
That was awesome!!! Was the blaster 1:1 scale ?
@VanOaksProps
Жыл бұрын
Thanks! Not sure if it’s exactly 1:1 but it’s close.
What kind of clear coat do you use? Satin, gloss, Matt etc?
@VanOaksProps
Жыл бұрын
On this prop, I believe I used satin.
I have the mandalorian amban phase pulse rifle from Nerf that I’ll let you paint for a video!
Really weird question, but how well does this gun twirl in the hand?
@VanOaksProps
3 жыл бұрын
Ha! It’s not bad if you fill it with something to give it more weight in the handle/body.
Would it be beneficial to use a clear coat right after applying the graphite to seal it in so I don’t mess up the application when handling it for panting the other parts
@VanOaksProps
3 жыл бұрын
Definitely.
@Jeerin_
3 жыл бұрын
@@VanOaksProps what type would you suggest for sealing in graphite
@VanOaksProps
3 жыл бұрын
I’d suggest a satin clear coat. Both Rustoleum and Krylon make good ones.
@Jeerin_
3 жыл бұрын
@@VanOaksProps awesome, thanks for the info!
How long did this take? Cause I want to try doing this.
@VanOaksProps
2 жыл бұрын
Not very long. I think I did it in an afternoon.
"I see we meet once again mando," *sniff sniff* "dude is that cinnamon?"
@VanOaksProps
3 жыл бұрын
Hahaha
In your materials list, the link for wax paint leads to “chalk” paint. It’s Java, so I wonder if it’s correct? I can use this chalk paint for the grunge? Thanks!!!
@VanOaksProps
Жыл бұрын
They must have changed the product at that link. You’ll want the wax paint. amzn.to/3jz30WD Do NOT use chalk paint. It dries far too quickly and leaves a matte finish.
Where can I find the rub & buff ?
@VanOaksProps
Жыл бұрын
Most craft stores carry it and there's links to Amazon in the video description as well.
Cinnamon is a great addative on wet paint looks just like rust as is...
Aww man, everywhere is out of stock for that Rubies Blaster.
@VanOaksProps
3 жыл бұрын
Yeah, there was a run on them not too long after I released the video. I think the cosplay community realized just how good they could look and bought up all of them.
@RainMakeR_Workshop
3 жыл бұрын
@@VanOaksProps Aye, we tend to do that with pretty much every blaster from Rubies. I have probably six myself. But I missed this one. I'll just have to wait for the next batch. Lets see, I have the Han Solo blaster, the Boba Fett blaster, the Jango Fett blaster, a Stormtrooper blaster, a Star Trek TNG phaser and the Batfleck Grappling Gun. All painted up. So yeah, six.
Isn't the trigger supposed to be brass as well.
@VanOaksProps
Жыл бұрын
I believe so. I painted this before we had really good images of Mando’s blaster so it’s likely to have some inconsistencies.
When you order your Mandalorian Theme Song from Wish.
@VanOaksProps
2 жыл бұрын
HA! Honestly, I'm just trying to keep from getting demonetized.
I am going to write my name in aurebesh and put tally marks for how many times I can spin a toy gun (47 times).