Definately needs to go into a stock S1 RX-8. No upgrades besides the hybrid 13b renesis. Then compare it with an original S1 RX8. This would show what the RX8 should have been like.

Put it in an RX8 please 🙂

@jo-qp7mz

6 ай бұрын

I agree it would be cool to see power difference between a mild mod stock rennie.

Yeah it has to be rx8. Something to get you to 300 rwhp reliably is what every rx8 owner wants (im one of them). Whether that be na (unlikely but great if yields +220 rwhp) or low boost on stock ecu. Making manifolds and selling as kits with ecu flashes will make plenty of $$$ for kmr or mazdatrix. No need to find a 13b rew and make the rx8 front cover fit. Can use standard OMP Standard mounting And standard ecu for most of it.

this motor could revive the RX8

My support is for the RX-8, lots of potential for knowledge to be gained there. I'd especially like to see the stock ECM and the factory intake system used with it.

@davidedgar7338

6 ай бұрын

i have a 2004 6mt. id love pp exhaust housings with stock intake and bit of inlet porting. id only do it if it worked on factory ecu.

@noname-sd5dt

6 ай бұрын

Just tune the stock ecu.

Do a series where you evaluate it in an Rx-8 NA with stock ECU. What needs to be done to the calibration file to run good, what are the results in terms of output? Then, standalone ecu (difference in output? how much?). Once the basic evaluations are done, reiterate the process in turbo form... I think this would be the ultimate hybrid renni video series everybody wants!

@jo-qp7mz

6 ай бұрын

I agree 👍💯💯

@noname-sd5dt

6 ай бұрын

Agree

@bennyb.1742

6 ай бұрын

Don't even bother with the stock ECU. Why shoot it in the foot? Who is doing a full motor build and not at least dropping a Haltech PnP in there?

@BeaverLakeMotorsports

6 ай бұрын

Explain how an oem ecu isn't up to the task...

@simonharris4801

6 ай бұрын

Own ecu is quite good can do alot with it

Gotta say I'd love to see it in an RX-8. You have been promoting this type of build for years and many of us are looking for guidance on how to do it. If you throw it in anything else but an RX-8 it doesn't do the justice many of us are looking for. You can always throw it in one of the other vehicles down the road, but to see a full mock up in an RX-8, running and brainstorming with the community would help us all more than just seeing something "cool."

Id love to see it in 90’s Miata. They handle very similar to a FB 1st gen Rx7 but is a Vert. They’re REALLY easy to come by too. BUT, I think it would benefit a ton of people by putting it back into a RX8. You can test the air fuel ratios on the stock intake and ECU as a lot of people who are interested in this build are RX8 owners. Huge support for this project and very interested. Happy Holidays!

Fit this back into an RX8. Cover off the small changes needed to make it fit and run, how it runs on the stock ECU, do some dyno tests, etc. This would really help bring in some additional interest for the RX8. It’ll also put to rest the argument that the hybrid configuration doesn’t work. Keep up the good work!

i would love to see someone build a better engine for the Rx8 . an engine that can handle 500 whp without a prob and for more then 20k khm

I would like to see it in an rx8 chassis just because there not allot of well documented info on this engine but i think its a pretty practical build.

awesome vid as always. RX8 would be my vote. Just picked one up super cheap and would like to see the potential.

Awesome ! Please test in RX8 and see how well it does. Who knows it may even pass the smog check.

Everyone is going to want it in an RX8 for a drop in upgrade. Realistically though, it's going to cost far too much for 99% of people that want it in an RX8 since this is really a race engine like you said. It would be cool though if there was another cheaper/simpler option instead of either REW swap or 3 rotor which are both extremely involved and expensive by themselves. So if it's cheaper and less involved than both those options, then it could actually be something really cool to have done in mass.

@KyleMohanRacing

6 ай бұрын

👏

@bobbyshaftoe

4 ай бұрын

I fail to see how this is too costly for 99% of rx-8 folks. A proper bulletproofing build of a renesis is not cheap in any case.. the extra couple/few thou is part of the bulletproofing. Dowels/new-gslse housings, custom exhaust... the question i have is what can be done with the stock ecu..? How much headroom, if any, does it have? The hybrid in NA format is a great candidate for a [legit] e-supercharger.

The RX8 is an excellent chassis if you want to go fast around a track. Cheap too.

man I would love to see if the stock RX8 ECU could run it effectively. Love these videos man.

Of course I'd love to see it in an rx-8 however...... you know where this would be really cool? 1964-69 Corvair [especially a convertable]! Please run this NA before boosting it! Run it on the stock computer first as well! This build has been a saga and I can't wait to see this build in the dyno!

Go RX8. The first FC is nearly 40 years old. The RX8 is going to be the next inexpensive platform for future club/vintage racers who want to be in a rotary car.

RX8! This way you to show how this would be a great drop in upgrade for the RX8 community. Then package a swap kit.

Would love to see this in a road course Rx8 ❤

I really wanna see one in an rx8 with a stock ecu on something like versatune. Something practical that every day guys would have. Im building a drift rx8 and this option is so tempting to alleviate some of the typical renesis issues.

Rx8 R3 edition. The best of the Rx8 with the engine it should have had.

Rx8 chassis will be neat to see. Thanks

I love the hotrod idea!! Straight up motel t fun or whatever ever old style. 🤘

What are the odd's 😂should definitely put it in the RX-8!

S1 RX8s are the next great rotary value and should be the next platform to support for years to come. They are starting to be very plentiful and in much nicer shape than an FC for the same price.

@erikc5101

5 ай бұрын

This coming from someone who has an SCCA EP FC

Dropping it into an RX-8 is the obvious choice as it's probably the most useful research and development wise, but man something like a t-bucket with a rotary is very very intriguing lol

I was down the line planning to put this hybrid motor in the chassis of a Datsun Roadster. I know plenty of people have swapped SR's but I think a small turbo rotary or Naturally aspirated one would be perfect for the lightweight chassis. Its also pre 75 for us Cali folk.

@KyleMohanRacing

6 ай бұрын

👏

S2 RX8 is my vote.

I'm with you guys! The plan is to do a renesis hybrid n/a with my '05 rx8. Need to figure out a header design with the oem motor mount. Keep up the amazing videos Kyle!

Been following your videos closely. How does the GSLSE housings affect exhaust port timing in a hybrid renesis build? How much overlap is there and should scavenging be utilized if there is overlap? Interested in port timing and boost using 10:1 rotors.

@inaNis_

6 ай бұрын

One thing I realized is that with the peripheral exhaust ports there is now port overlap, so it might actually drop the dynamic compression down to a more boost appropriate level.

@bennyb.1742

6 ай бұрын

Someone's been reading forum posts by that angry old man who HATES the idea of hybrids lol. I'm interested in this too. I'm glad that someone as experienced as Kyle is doing this because every other one I've seen is either kind of sketchy or just never gets running.

@soviet1942

6 ай бұрын

@@bennyb.1742 you are most likely absolutely correct lmao.

Some of us remember when that MotoIQ article went live, and are eagerly waiting to see what the N/A version turns out to be... because we have all the parts to build one for their AE86 *cough cough*. Screw the haters, Kyle, take your time.

I’d say to put it in an rx8 but I am very close to finishing my boosted half bridge hybrid in my rx8 and would like to document the process once I have “perfected it”

I'm building one for my rx8 and would love to see you manage a wideband and boost with the stock ecu. Maybe a reflash and some kind of affordable piggyback situation. These are "budget" builds after all ;)

It's really unfortunate that the auxiliary port servo motor and control linkage is placed right where the peripheral intake ports would need to go. Otherwise the hybrid motor could be turned into an 8 port and use turbo waste gate valves to control airflow to the peripheral ports and maintain air charge velocity for better low end torque.

Yessssssss!!!😂😂😂 im so happy!!

impressive indeed, lets see NA and turbo exhaust configurations for this build, first would be good to see the dyno graph to at least know what power gains we get from such build. this idea of swapping irons/housings would be cool to see on a Single rotor, cheaper to do and as an experiment of sorts with rx7+rx8 parts, imagine how far it can be pushed with peripheral ports too

Love it ..40s hot rod all day

rx8 would be awesome

Please put it in an rx8.. been following this build to put it in my rx8..

Gotta put it in an 8

I'd love to put hybrid renesis to my 8 next year and make reliable 350HP RX8. I think 8 should have at least 300HP stock.

Please, please, please install into a RX-8. We've come out of the woodwork into the comment section for this.

Thanks for the video update! This is cool for anything small and light, but put it in RX8 first off please.

I have a 1930 hot rod that I am currently building into a race rod with a rotary engine . I would love a motor like that in it !

I would like to see it put in a street rx8 na to see what it will make NA and to see how reliable it can be. After some abuse I would like to see it boosted in the fd. I own a Fd and my brother in law ownes a rx8. Please do it so I can check it out. It was actually one of the reasons why I subscribed.

Put it in a Rx8 🙌🏼

There’s a lot of rx8 owners which are looking for a reliable, powerful solution using the renesis in their RX8 chassis… could be an entertaining build series.

Myself because that Ford and Mazda have a love affair I'd love to get a 4x4 Ford ranger or a bronco to see what performance it would make

It would be really cool to see if these hybrid motors could run on the OEM ecu. I don’t see why it wouldn’t with a tune. I’d also like to see pictures of that header that you mentioned. The FD is really tempting though

Put it in an r2 Mazda make sure you use the Rx8 instrument cluster

Rx8 ❤

I'd like an emgine like that or a Rew for my 1983 Rx7

Another vote for the RX8 please

Yes

You can find a Good 2wd ranger for cheap. The drive train is nearly identical if you use rx7 trans. You’d have to swap out the master cylinder. Also I think a Mazda pickup would be most fitting.

@IohsmdIglomdrnIjsmsIhafmIafmli

6 ай бұрын

Oh and you have to consider rear end gearing

What intake are you using. Is it a stock 6 port? If so, being it having better exhaust flow, would you open the intake ports at a lower rpm and keep them closed lower for better idle and or is it more of a preference of how you want the HP and torque curve?

Hope it goes into a RX8

Will KMR do a 20b Renaissance Hi-bred rotary engines, I would love to see that

You'll get more enthusiasts if you go rx8.

the gslse hybrid is a perfect engine build if you own an rx8 and putting another engine in the rx8 and you got leftover engine from the rx8

Put in NC miata

Carb n dizzy would be cool

How much horsepower can you make on a boosted hybrid renesis engine like this in the video?

@tomislavkustura1492

6 ай бұрын

Following. would love to know the same

Could there be the “power valves” which has been used on those 2 stroke engines? Both intake and the exhaust? Then we would have a more reliable rotary engine than ever! There could be a lot of variable thing which can be used on it!(variable intake and exhaust) which can make this machine having better low rev torque and better engine traction speed with high revs!

Rx8 if possible

Rx8 just to see how it works out and how it will work with stock ECU.?

I need to know what to buy for a rx8 hybrid

Can you make a video about 13B engines with a single scroll turbo vs twin scroll turbo. The FD is legendary for the exhaust charge which is perfect for a twin scroll Turbo but this 5/6 port hybrid engine would require a single scroll Turbo. What turbo have you used on the hybrid 13B?

I want to put one in my AW11

Na4tudally aspirated power figures is what i am interested in ?

Do a ratrod a few hotrods been done here in NZ and no one h8ed on em at all,, people actually werent fazed at all but build a mental ratrod must be slammed rowdy angry,,ahaha

How about a SUZUKI SIDEKICK!

Rx8 rx8 rx8 😊😊

Do you think it's worth blocking the center plate exhaust port and doing a t4 twin scroll manifold? I'm just not sure if it could cause a carbon deposit problem in the blocked ports. I'm just slowly mapping out my plan for a hybrid rene once I outgrow my current 320hp drift setup. Also Kyle, do you have any tips or resources that might help me relocate the entire box of ecus and computer in an rx8? Mine seems to be overheating after multiple drift runs and the canbus network dies, followed by power steering if I keep pushing it. Really appreciate you sharing your knowledge with us. Thanks

@KyleMohanRacing

6 ай бұрын

No . I talk about why I don't think it's a good idea in other videos.

Put it in an FD and make a "FD3S GT3 Touring ST" Title for maximum SEO/clicks.

As a Rx8 owner i would like to see this engine in a Rx8 just to see what mods can be done to the car and their are no youtubers that mod Rx8's

So how much whp is this engine good for on a turbo setup?

On a Rx8 110%

*I think it should be put in an FD, just to annoy some people...*

Hi Kyle. Have you put these motors on a dyno?

Can you make more than 500 whp on a boosted hybrid renesis engine?

I would like to see it on the FD just for fun

@KyleMohanRacing

6 ай бұрын

me to

@bennyb.1742

6 ай бұрын

@@KyleMohanRacing I really want to see it in an FD as well, but for a more practical reasons. If this works decently it could really save a lot of blown up FDs from LS swaps! I'd like to think that more people would keep it rotary if it was easier/cheaper to get than a built REW.

i want one for my car :)

S1 rx8

put it on a engine dyno NA first, that'll tell us more than waiting for a whole chassis to be built up.

To My timeattack starlet❤

Put it on a FC or a FD 😊

Are you still offering the housings? You took the video offline, and I can't find it on your webpage anymore. :(

What should you put it in? There's only 3 different vehicles that a rotary should be swapped into (obviously if they didn't come with one)... 1: An MX-5/Miata 2: A DMC-12 3: A B2200 That's it. The Miata should've came with a 13B, the DMC-12 waa supposed to come with a rotary, and the B2200 should've been available with a 13B to make a new "REPU". Period. Edit: unless you can find either a Mazda-Go rickshaw (or another rickshaw or Tuk Tuk), or, a first Gen Mazda Carol.... you can make a "hot rod" out of that 😅👌

@IohsmdIglomdrnIjsmsIhafmIafmli

6 ай бұрын

The 96+ ranger can fit 13b with rx7 trans without swapping much

I would love to know how much hp this car makes on the dyno jet,1/4 mile

@KyleMohanRacing

4 ай бұрын

We posted dyno numbers on the previous version

@WankelOnTop

4 ай бұрын

@@KyleMohanRacing just looked at the other video,430 hp is huge for the renesis hybrid especially at 14 psi i wonder how much it can be pushed,we will see in the future,Good stuff,hopefully ill be working on something like this soon 💪💪💪

A 1930 landspeed kind of hotrod would be cool. So different… lotus link quick change rear end, with a dog transmission. That’s pretty bitching …

I forgot what rotars you put in it?

@KyleMohanRacing

6 ай бұрын

RX8 with 2mm RX7 seals

A geo metro...😮

Is it a street or Bridgeport? Also would the hybrid even need a Bridgeport to brap?

@KyleMohanRacing

6 ай бұрын

wont brap without a bridge, same as a 6 port RX7. ......

@ethanbulls1592

5 ай бұрын

@@KyleMohanRacing thank! Is yours a 6 port set up?

How it cost to build hybrid

Rx8 please 🙏

@racing_with_mitchell has been working on building and putting a hybrid renesis in an rx8 on the factory computer

better apples to apples comparison in a Rx8.... my opinion anyways... #Rotarylife

Brap a hot rod !!!