Removing Fender Deck & Foot Rest John Deere X Series Tractors

Автокөліктер мен көлік құралдары

This video shows how to remove the fender deck and foot rest on a John Deere X595. This procedure will be the same for other X Series tractor such as X465, X475,X485, X495, X575, X585, X595 and X 700 Series. Removing the fender deck is necessary to check or replace the fuel sender or fuel pump, free wheeling check valves, implement relief valve shimming, or driveshaft.

Пікірлер: 15

  • @deereboy8400
    @deereboy8400 Жыл бұрын

    Thank you.

  • @chrisbeerad8835
    @chrisbeerad88355 ай бұрын

    Thanks mate big help

  • @gotdeeres

    @gotdeeres

    Ай бұрын

    No problem 👍

  • @mc-mk9oj
    @mc-mk9oj2 жыл бұрын

    A website I looked up said the hydraulic system is 2000 psi but going by what you said I'm guessing they are wrong and the pressure is much the same as the 455s etc 1000 plus or minus a bit ?

  • @gotdeeres

    @gotdeeres

    Жыл бұрын

    THe hydraulic pressuer for 4X5, X595 etc and X series tractors is around 1000 psi. I have MEASURED THE PRESSURE WITH A GUAGE. This is also what the Tech Manual states. Compact tractors like the 2305 1025 etc is 2000 psi.

  • @jodys.6274
    @jodys.62742 жыл бұрын

    Can you remove the foot rest and fender deck as one piece?

  • @gotdeeres

    @gotdeeres

    2 жыл бұрын

    No, it is not possible. There are only 4 bolts holding them together, so it is fairly simple to separate them.

  • @jamesmabry2261
    @jamesmabry22613 жыл бұрын

    Do you plan on replacing the implement pressure relief valve as recommended here. John Deere Transaxle Hydrostatic Relief Valve Must be Installed on X575, X585, X595, X728 and X748 Series Tractor Equipped with a Front End Loader. Requires M146148 Free-Wheeling Valve Control Lever.

  • @gotdeeres

    @gotdeeres

    3 жыл бұрын

    No. I have running my Buford Bucket on 318, 322, 332, 425, 455, X495 and X595 tractors and have never had a problem. The JD loader is different so if you want to install the pressure relief valve, MIA885143, it will cost you around $450.

  • @jamesmabry2261

    @jamesmabry2261

    3 жыл бұрын

    @@gotdeeres Sorry I bothered you

  • @victorthomas6782

    @victorthomas6782

    3 жыл бұрын

    When you buy your tractors, do you buy them without the mower deck? If so, was the savings significant? I’ve also heard that purchasing the Buford bucket is challenging due to high demand, is this true. Obviously weighing my options on tractor purchases. Thanks for any insight.

  • @gotdeeres

    @gotdeeres

    3 жыл бұрын

    @@victorthomas6782 I buy used tractors and most of the time they come with a mower deck. If you buy new, the mower deck is usually extra, depending on the model. My brother, Pete, will not be building any loaders for a while due to health problems.

  • @gotdeeres

    @gotdeeres

    3 жыл бұрын

    @@jamesmabry2261 Sorry I snapped at you. I have been asked this question so many times by people who do not understand the purpose of the loader relief valve. I have never used it in any of my many tractors without any problem. That is my opinion which not everyone may agree.

Келесі