If this video helped you, please SUBSCRIBE! Thanks!

@HoldFast-un2fc

Жыл бұрын

Of course it helped alot matter fact I am using this method right now got 8 valves done so far. Thank you

@dukeofnyd1

Жыл бұрын

@@HoldFast-un2fc awesome!

Perfect 😎👍. No intros, no annoying explanations, just straight to the point. And it works. Thank you.

Next to my kids being born, this is the most beautiful thing I’ve seen

@markboston9303

4 жыл бұрын

I concur and I dont even have any kids!

@jeffmeade3695

Жыл бұрын

That's what I said

@CTK123.

Жыл бұрын

I'm in tears right that was touching

@recklessgenesis3476

9 ай бұрын

Nasty blood slime cunt , no thx😢

@jared4670

4 ай бұрын

Couldn't agree more

Had to change a valve on my wife's 05 kia sedona. My wife was like, "How long is that gonna take?" I said, "Probably all day, its not an easy job." She took the kids to the beach. Using your little trick, I had the job done from start to finish in just under 2 hours and now she's running like brand new! With all the extra time I had left I got to take a nice long nap afterwards! Oh and I returned the expensive tool I bought too. I never even opened it lol. Think I'll use the money to buy some beer. I'll be drinking them in your honor! Cheers bro!

How does this not have at least million views. Thanks man. This is what KZread was created for

@MRMIKE276

3 жыл бұрын

This is peak internet.

Dude, you are a winner.

@dukeofnyd1

3 жыл бұрын

Thank you!

Unbelievable! First try after many horrible hours of failure. I used two layers of duct tape stuck face to face. Seriously, first try after hundreds of other attempts with my own tool. Amazing. Thanks you.

@zerkfn8501

3 жыл бұрын

Genius

@celmotors

2 жыл бұрын

Unbelievable

@kevinhancock4064

Жыл бұрын

Mate u do ypu4s with head on ? I dud do mine woth head off but clearly me being a clutz there were one lot of keepers that weren't in 100% I've soncevremoved them but as heads on I've tried this ..woth rope in chamber etc. Maybe I need to pack a smidge more rope in as there an element if soringvto the valve ..doing my nut in I want to get this engine finished

Effin Genius brother I'm 55 been turnng wrenches 40 yrs never seen that way

Never removed valves in my life and just tried this now and worked exactly like the video. Huge thanks man!

Man some people are just straight up brilliant and people like this make KZread resourceful, educational, time and money saving, hair loss preventitive and whatnot. The tool for this is $50 + plus waiting for the shit to come via pigeon, shop time cost is $600 plus all together this dude saves you about a grand money that can be used to order 5 hot escorts. I wouldn't actually know, er... a buddy of mine did the cost comparison.

@dukeofnyd1

3 жыл бұрын

Thank you! Please subscribe or send escorts!

@mrjaybennett80

3 жыл бұрын

@@dukeofnyd1 HAAAAAA!!!! will do both!

This is probably my first comment in over a decade or ever longer! Awesome video!!! Nice and short, you get right to the point, AND IT WORKS! Good job man!

I laughed half way through, thinking ok great, now how do you put them back... i still can't believe this...

@lenny0347

3 жыл бұрын

mate.... me to

@jaybenjamin5649

3 жыл бұрын

How is the plastic keeping them in.?

@zerkfn8501

3 жыл бұрын

Genius

@raisethecolours

2 жыл бұрын

Same here lmao...

For anyone who wants to do this trick without removing the head you can feed a few feet of small rope through the spark plug hole and then turn the crank till the piston is hits the rope. This will hold the valve in place. Then when your done just pull the rope back out.

@brotomwang8218

3 жыл бұрын

Or just pressurize it. Summit sells tools for $20 find out your spark plug thread

@jet4022

3 жыл бұрын

@@brotomwang8218 that’s true too! But the rope trick is a lot easier if you don’t have a compressor. Also you don’t have to worry about damaging anything by over pressurizing as a lot of compressors can easily reach 100 psi which is way too much. Also if you don’t get enough pressure in there, then bye bye valve.

@brotomwang8218

3 жыл бұрын

@@jet4022 how is 100psi too much? lol motors reach 170+psi of compression. and you shouldnt need more than 50psi. I wouldnt put a rope in my motor. The best way is to just turn the motor into the positions where the piston are at the top & both valves are closed (compression stroke). im about to do this job myself on my Evo and i think thats what im gonna do

@thefakedoctorphil

2 жыл бұрын

And hope the rope doesn't form a Knot, when you try to pull it out. Read that on another forum. Cheers

@cryeredd7563

2 жыл бұрын

@@brotomwang8218 for a newby, i wouldn't recommend pressurizing it. what if you get stuck and have trouble getting the keepers back in? talk about a lot of stress, when adding in a potential time constraint.

I've been working on engines for years This is some vudo black magic

Gentleman and a scholar. While being quiet. 🎉

I’m gonna do mine later this week. Thanks for sharing. Great job! ❤

HOLY SHNYKEE!! This one really works folks!...I liked your no gabbing, just business policy too...went to bed depressed after wrestling a valve seal job without success...ran into this and went out to the garage (at midnight) and...Bingo!..Got'er done, then and there!

Well, i be dammed ! never thought of this or ever seen this preformed like this before. Just pays to watch youtube.

By far.... one of the most useful videos for a mechanic on youtube. Good Job and thanks for sharing your knowledge. ;)

@dukeofnyd1

3 жыл бұрын

Thank you!

I’m so late, this is still incredible years later. Thank you

Oh wow, i was slightly stressing over having to buy more tools but this..... This has just made my day! Good golly that was efficient haha

The infamous Subaru EJ head….. I’d recognize that from space at this point 😂. Always swapped heads but I think this is just awesome. Will remember for future endeavors. Thx for sharing the wealth 🤘🏻😉

Absolute legend man...be doing this technique tomorrow for valve spring install...top notch

Absolutely the best solution to not having a valve spring removal tool that I've seen so far. Brilliant! Thanks for the vid!! 👍🤙

@dukeofnyd1

5 жыл бұрын

Thanks Keith!

Myself struggled watching tons of videos on how to make all these scary contraptions to do this very job. This is by far the best. Thanks for sharing!

Absolute savior for a broke fella

Brilliant! After fighting with putting in the keepers for an hour I came in and saw this video. Used a piece of thick rubber gasket material and a spark plug socket...CLICK! Finished! Thank you...thank you...thank you!

@dukeofnyd1

6 жыл бұрын

iwantthisname your welcome! Glad it worked!

this saved me a lot of time ❤ thank you brother.. Love from Sri Lanka 🇱🇰

Absolutely brilliant. I've gone a bit more ape and just tap the socket wrench with a mullet. Works flawlessly and there's no need to press down. Tons of thanks!

Best example thus far that I’ve seen! Thank you! One guy in the comments below said to use gasket maker, I’ll try this since I have an extra sheet.

After this short and sweet I went straight to subscribe.

AWESOME !!!!! The first impression is the most important!!!!! You've earned my subscription !!!!!

Haha genius 🤣 Only thing I would like to add is if you're going to try this _make sure_ you check and see if the valve spring is cockeyed. Sometimes if they're not on 100 percent it'll drop the valve when driving.

Wow!! You did that!!! And I thought I was fast. But sir you blew me out the water! Definitely going to do this trick on the next valve job!!

I can’t lie that’s impressive! I knew about removing them like that but I’m surprised you could get them back in.

You are a God amoung men. I have watched all the videos youtube has one installing these without a tool. None came close to working as good as this method. It worked so well... I went to my Amazon account and cancelled my order of a valve spring compressor. You just saved me $35. This is by far the best and most to the point youtube video I have ever seen. I'm subscribing just for this video as I don't even know what kind of content you usually post. Thanks man. If I was gay I'd kiss ya.

@dukeofnyd1

Жыл бұрын

Glad it helped you! Thanks for subscribing!

I'm gobsmacked about your approach 😀!

Wow!! I’m going to have to try that for sure! Rebuilding my 24v vr6 And i don’t want to spend 100+ on a tool and I don’t want to beat on the head with a hammer, great video thanks!!

Going to try this on a Vw 2.0 l engine! I’m retired Volkswagen Tech we used this method except lots of grease and two people so 4 hands mad it easier! Definitely going to give this a try! Awesome info for the DIY folks!

Well.... son of a.... YESSAAAA!!!! Nice work, my dood!! 🤘😎♥️

This may be the best bang for the buck, value per minute, useful video on youtube. Thanks for sharing.

@frankposterello1628

6 ай бұрын

Actually did it today. Worked just like the video. I used a rubber glove for the duct tape part and worked just as well.

@dukeofnyd1

6 ай бұрын

💪💪💪

This trick my father uses for fit valves since 25 years and I'm too . Watching a engine runs smoothly it's so satisfaction to us

Genius. That's serious creativity and problem solving.

Great video sir, thinking outside the box is always the best way, awesome !!

Wow that brings back some good. Memories my dad taught me that when I was a little kid

KZread needs more people like you.

@dukeofnyd1

4 жыл бұрын

Thanks Kevin! Nicest YT comment ive ever had! 😁

Briliant and original idea ! Useful and easy to use .

You, my good sir, are indeed a genius!

mechanic keeps mentioning i need to take the head off to install the valve spring. But when i seen this, you've proved me and relieved me by huge margine. I just install a new head gasket before the valve spring came off i was super frustrated if i had to take the head off again... youre a big save. Thank you

@cromagnon305

3 жыл бұрын

You need to hold the valve from the piston side, with compressed air or rope or something

I got a Lisle 36050 install/removal tool. Putting the keepers back in was impossible. I wish I had more downward pressure. I tried the hammer method and immediately permanently lost a keeper. I came in & watched your method. Brilliant man!!! I'll just clamp two vice grips on the tool tomorrow and I bet it will be a breeze. Wow, thanks a million for this video!

@dukeofnyd1

6 жыл бұрын

+AntiqueRadioandTV good luck!

Give this man a medal. Did your method on my bike and it works.

@dukeofnyd1

2 жыл бұрын

😁😁😁😁😁

Brilliant just brilliant I thought no way it would work that easy

it's like you were doing magic trick when you covered it. thank you!

One of the best useful videos on youtube, congrats!👍👌

@dukeofnyd1

2 жыл бұрын

Thank you!

Holy shit! That’s sheer genius!

You're DA MAN! I have a 20 valve vw head tomorrow to work on, guess if I'll try your trick

*WOW* »»»»»»»» 2 or 3 amazing tricks ,man,you deserve a medal. edit: you deserve a check,i think i'll send it to you, UPS

I work at balise hyundai took me like 3 hours to do the valve steams on a elantra 2016 with the special tool supply by the dealer, gonna try this ,thanks dude🏁🏁🔧🛠🛠🔧🏍🏎

Thank you brother! That really worked out nicely. I'm rebuilding the heads on my 2006 chevy trailblazer w/4.2. My old valve spring compressor wouldn't fit inside this head, so I was about to order a different one off ebay when I came across video. I said heck I'll give it a shot. Man, you saved me a lot of money and time. Thanks again.

@dukeofnyd1

2 жыл бұрын

💪 hell yeah! Glad this worked on your atlas !

@dylanmerrigan7386

Жыл бұрын

What did you exactly use for doing on the trailblazer? I'm replacing one on mine here in a couple days. Thanks

You are the best! I try it with your method and It works. Thank you for sharing.

yo... your my hero.. this works 100000% try it at home and works wonders.. thanks so much

I just got all 4 valves out of my motorcycle. First engine rebuild. Thanks!

Thinking outside the box !! Well done !

Nice! I love simple solutions and this is great

Excellent tip! Thanks for sharing!

You are a life saver worked first try.

That was pretty cool. Great freakin' idea dude.

I’m impressed. Taking off is easy getting thoes fuckers back in is the problem. Good shit man.

Damnnnnn. Just saved me some dough my man. Appreciate it

This worked really well thank you very much

Thanks man! Got my bike running again

Just the video I was looking for! Hot damn that's genius!

Thanks, this video helps me a lot. Congratulations

Excellent idea, you should patent your discovery.

What the fuck did I just watch? I know I need to go and take all of my tools in the garage directly to the dump and never touch a wrench nut or bolt again in my life. This was the most beautiful thing I have ever seen today.

I love you for making this

Thank you, just used this to reinstall mine

Works immediately!! Thanks for the tip!

excellent. about to take on a headgasket job along with valve stem seals but no one stocks the proper tool. got some magnetic spark plug sockets that would probably work for removal but i was worried about installation. but of course not anymore thanks to you!

My whole career in auto mechanics I’ve used a bit of grease to stand the keepers on the retainer. You, sir genius, have used what looks like the entire packet. 🤯

@dukeofnyd1

3 жыл бұрын

No grease here but ill try it next time. Thanks! 👍

@Benitoapplebum

3 жыл бұрын

Immortan Jon there’s no need for grease anymore with your new technique! You should patent that idea before 3m does lol.

You are the FN MAN! 👊 Thank you for this Brüver.🙏

Crazy days, crazy prices, low income. Your experience saves lives.

Best video I think I’ve ever seen on KZread 👍

@dukeofnyd1

3 жыл бұрын

Thank you!

👍Best I've seen so far that was fuc ing cool 👍

That is AWESOME! Great idea!

Good job, your right, I missed that. Again, nice job.

Close to genius bro! Fkn Nice!!

Wow wow wow very impressive I’m chocked

Great video. like things that work and don't involve grinding, cutting or welding to make a tool.

Man you are my hero ! thanks alot

Awesome, thanks for the demo!

slick Willie !! great Job !!

Awesome idea man! Bigtime Thank You for sharing!

Absolutely genius my friend ❤

Thank you, my Toyota and I love you very much for this tip!

@dukeofnyd1

Жыл бұрын

Youre welcome!

That is awesome dude, I m gonna try it on a ford 5.4 2v

In the voice of an opera singer. *GEEENNNNIIIUUUUSSS*

When i did top overhaul of my car engine..I spent about 24 man hours just to remove and reinstall the valve springs..it was the most difficult part..but after I watched this vedio..i just..hahaha..now I able to it in one hour....

@tylerknight4723

4 жыл бұрын

First time here watched this vid had an off in avout 45 mins now to get an back on lol

Smart. blessing from Curacao

Good deal! Thanks! Worked great!