No video
REM II + Renduinix V9.00 Walkthrough
1989 Jeep Cherokee XJ Pioneer Renix 4.6L I6 AW4 NP231 6" RE Lift 35"x12.5" STT Pros
nickintimedesi...
Follow me on Facebook and Instagram!
/ nickintimefilms
/ nickintimefilms
Check out the Website!
www.nickintime...
Пікірлер: 45
Have no idea what any of this is! Our XJ’s are ‘93 and 2000. But good to see a video from you and still watched the entire vid !! I know your life has become way more ‘adult’ 😀 but am looking forward to some classic cussing XJ videos! ❤️🐞
@kansascityjimi2531
3 жыл бұрын
Do you know if xj and zj take the same rims??
Always a good day when I get a notification for your uploads!
Psyching for V9!!!!!! Thanks for all the work Nick, you are ALL TIME
Damn, wish I would have found this when I was troubleshooting some emissions issue with my '88! I'm still thinking I may pick one of these up anyway, great work!
Just got MY R.E.M ll + last night and I'm exited put it in my Comanche once I'm off work!!!
Hello Nick glad to see the video
Hola Nick ¿ya tienes en stock disponibles para entrega inmediata? Necesito 1 para mi jeep cherokee 4.0 6l automático año 1987 rennicks
Bro im begging you, make some more and put them in stock. I want one ASAP
I have a 95 2.5L 5 speed manual, Do you make/know of anything that would work for me, thanks.
@NickInTimeFilms
2 жыл бұрын
You'd have to snag an MT2500 off ebay with the right cartridge and adapter. I haven't dug into OBD1 yet as it's more complicated then my current stuff
hi. i was wondering, how easy is it to wire the whole setup. like is it plug and play or is the splicing and soldering involved... i may have missed a video about that. This thing is DOPE!
@NickInTimeFilms
2 жыл бұрын
The REM is plug and play with included Renix adapter! I'm just trying to fight off chip shortages right now so I can get some back in stock again.
Any chance you have come across chips for the REM 2 lately? I may be buying a 90 xj and would love to have your system
@NickInTimeFilms
2 жыл бұрын
Nada, I'm still seeing estimates for January 2024 which I think is just a filler date. For now I've only got REM Clocks.
Hey Nick, sorry to bother with an OT... What could be sounding like a bad flex plate but isn't. It happens on cold and warm Idles, then goes away, fades revvig up... Its a Low sorta "ting ting" thing ....
@NickInTimeFilms
4 жыл бұрын
And you're sure it's not a bad flex plate? Have you seen my replacement video and what mine sounded like?
Do you still make these? I can't seem to find where to buy one
@NickInTimeFilms
2 жыл бұрын
Yeah, they would be available on my website store but I've just been out of stock since the chip shortage took out the main brain i need to make these work. Hopefully later on this year I'll have more to offer again.
When will there be more available?
@NickInTimeFilms
2 жыл бұрын
Follow my Facebook page nickintimefilms for the latest updates. I'm trying to make some easier designs to get around the global chip shortages right now, but I won't have any V5s back until I can get what I need again.
Will this update work on the clock version?
@NickInTimeFilms
4 жыл бұрын
Id have to port this to be compatible with the v4s. Mostly has to do with making sure the older clocks work with the new time code.
@abrahambarkhordar5572
Жыл бұрын
@@NickInTimeFilms hi I just ordered the clock version. was that a bad idea? should I swap it to this version so that I get the newest update?
@NickInTimeFilms
Жыл бұрын
No, the v4.3 clocks are running the latest software because it uses the new clock hardware.
With the cel and codes you can pull from the computer. Could a logic be written to where if a code is thrown on key turn, the cel comes on and auto pulls the code screen for you to see. I.e code thrown> light on if light on display codes else normal home
@NickInTimeFilms
4 жыл бұрын
Hmm, I kinda like that idea. I'll see what I can do
@deeganboris7925
4 жыл бұрын
It shouldn’t be a rough code just a conditional. But I don’t even want to see what you have for this already
@NickInTimeFilms
4 жыл бұрын
@@deeganboris7925 haha, the code is starting get a tad unmanageable in areas but I'm slowly getting it rounded up. But a simple start up condition would be simple enough. I may even add an option to ignore certain conditions for folks that just have things unhooked
@deeganboris7925
4 жыл бұрын
Sounds interesting. What coding language you use?
@NickInTimeFilms
4 жыл бұрын
@@deeganboris7925 I code in Arduino since that's what the REM is based off. It teensy compatible which is Arduino compatible, haha. All the code is open source and hosted on my site.
Do Xj's and Zj's have the same size rims ??
@NickInTimeFilms
3 жыл бұрын
They have the same lug pattern. I'm not sure about backspacing though
Im not sure if you covered this but will ask anyway. Tough for me to make my question clear so here it goes. Example. This leads to my question. When displaying 4 functions on the screen, example, STFT, LTFT, O2 sensor and engine temp, you have to repeatedly push a menu button till you find what you want to display. All good. If you end up passing one of the options you wanted to display you have to go through all the options again till you get to the one you had passed up. Question. Did you add a feature that you can just go back one option to get to the one you passed instead of going all the way around through all the options? Hope that makes sense. Thanks Nick.
@NickInTimeFilms
4 жыл бұрын
That would be a good idea, because I know I do that a lot myself and it's annoying. So, what If I add a feature where if you hold the button down, it will then go back 1 reading? That would allow back and forth menu travel to an extent.
Would they work for a 98 HO motor?
@NickInTimeFilms
4 жыл бұрын
The REM would not as it's specifically designed for Renix Systems. Look up a ScanGauge II for something similar in the OBD2 realm.
these work on 5 speed renix to?
@NickInTimeFilms
4 жыл бұрын
Yes they do!
You should add hardware and vehicle hack to the tags.
Do you offer a Warranty?
@NickInTimeFilms
4 жыл бұрын
Yep! It's not anything officially written out yet, but if there is a manufacture default of some kind, I'll cover anything required to fix or exchange it. Any other damaged I'll still attempt to fix for a low price or work out some kind of deal out. It's more about getting useful products to folks then trying to make tons of money at this point.
@SomethingClever80
4 жыл бұрын
@@NickInTimeFilms sounds good, I've never seen anything like this before.
@felixmikkialmosttoasted3911
3 жыл бұрын
So with the updates, are these like everything else in the world that you buy one then get an update then the next update the REM II box is no good?
@NickInTimeFilms
3 жыл бұрын
It depends. Hardware updates are the main concern. All V5s support the same software, and all v4s are a bit behind. The clocks changed the most which holds back that software a bit