We go over our servo programmer. We discuss all of the parameters, setting them what their features are. We also demonstrate how to program your smart servo from a winch to a servo, and back to a winch.
Жүктеу.....
Пікірлер: 9
@_alienx_p3 ай бұрын
Are the specs on website at 100% power or the percentage set from factory?
@reefsrc
3 ай бұрын
Like we said percentage set from the factory.
@_alienx_p
3 ай бұрын
@@reefsrc I mean like is a 1100 at 8.4 from factory 1100 ounces at 80%? So I can program to 100% and get more than 1100 ounces?
@reefsrc
3 ай бұрын
Yes, I do not know the factory power settings at the moment. But if it is less than 100% you could make that adjustment.
@Cranklotus2 ай бұрын
Can i run the raw 800 which draws 6.8amps on 7.4v of power with a bec that outputs 6 amps? Or do i need to keep the servo on 6v that draws 6 amps?
@reefsrc
2 ай бұрын
You can run the 800lp up to 8.4v. If your BEC only goes up to 7.4v that will work as well.
@Cranklotus
2 ай бұрын
@@reefsrc what about amps? My bec puts out 6 amps.
Пікірлер: 9
Are the specs on website at 100% power or the percentage set from factory?
@reefsrc
3 ай бұрын
Like we said percentage set from the factory.
@_alienx_p
3 ай бұрын
@@reefsrc I mean like is a 1100 at 8.4 from factory 1100 ounces at 80%? So I can program to 100% and get more than 1100 ounces?
@reefsrc
3 ай бұрын
Yes, I do not know the factory power settings at the moment. But if it is less than 100% you could make that adjustment.
Can i run the raw 800 which draws 6.8amps on 7.4v of power with a bec that outputs 6 amps? Or do i need to keep the servo on 6v that draws 6 amps?
@reefsrc
2 ай бұрын
You can run the 800lp up to 8.4v. If your BEC only goes up to 7.4v that will work as well.
@Cranklotus
2 ай бұрын
@@reefsrc what about amps? My bec puts out 6 amps.
Is this gonna be available for a Mac?
@reefsrc
3 ай бұрын
Just windows for now.