RedMax gets a Castle Monster X 800kv and
Ойын-сауық
Wow this thing is a BEAST!!!
Call Florida RC Outlet and see if they have one for you! 904 551 3275
Traxxas Xmaxx traxxas.com/products/models/e...
Xmaxx RTR on Amazon amzn.to/2xA1lYS
Xmaxx Parts on Ebay rover.ebay.com/rover/1/711-53...
WFO Motor Mount wforccustoms.com/
Castle Mamba Monster X8s home.castlecreations.com/surface
Castle Mamba Monster X
Amazon amzn.to/3bGPBlY
Ebay rover.ebay.com/rover/1/711-53...
Pinion Gear from Saga Customs www.sagacustomrc.com/
Пікірлер: 213
Killer!!! This is just like doing this in a life size rig, it's never a straight bolt in job. Always some customization or modifying to do. Hahahahahaha you went from. A big block to a blown and stroked big block!!!!
them new combos are nuts. Cant wait to get one when their available again. Im gonna be running a belt drive with mine. I got a feeling i will be burning through batteries having them charged to play again and again. Cant wait.
love these overpowered rc builds!
im very happy w the max 6 esc with stock 8s motor, but if I had the money Id love to try this set up. Just upgraded my sons rustler xl5 4wd with a hobbywing max10 and motor combo. Its a brushless sensored system. Runs so smooth
Absolutely incredible vid my rc brother looks like i need to upgrade the XMAXXX now
Just what I wanted to see a 1/5 scale motor install in a stock xmaxx. Epic POWER that thing got. 👍👍
@ExocagedRC
4 жыл бұрын
Jason H yeah it was box stock before these mods.
I wish you ran the max5/1100 kv set up in the same spot. Would've interesting to see the comparison!
How could anyone give this a thumbs down? Overpowered Insanity is always fun to watch. Impressive.
Great video!! Love that combo. Truck is a beast now!!
That auto flip function will destroy diffs. Awesome vid! 👍🏿
That body color goes good with its insane power
Traxxas sells the mount for the temperature wire around the motor I'm not sure the part number offhand.
"Bro, is that a Spur on your motor?" O.o hehe, very nice setup, let the fun begin :D
@ExocagedRC
4 жыл бұрын
Dave Racine LoL it’s bigger than some spurs. LoL
Good mornin 6:30 in MO and that motor is the size of a BEER CAN I'm awake now
Hey what front and rear diff oil would you recommend with the 800kv motor upgrade thanks
would adding faster spur gears generally destroy the electronics to the truck? i dont get why and how to prevent adding a faster spur pinion and destroy the electronics
Crazy power👍, thx for the video
Where did you get the little speedometer you had on the back of your X maxx
Kick ass!! Sounds like a skill saw or something 😂
So what do you like better? The xlx2 with 800kv or the 1100kv? I’m curious on speed and torque
I saw a video where they put the castle fan on the motor also. With a little cutting
This is badass more please more xmaxx
So my stock 8S ESC smoked so I bought the max6 esc I’ve used it once and I’m not happy with it at all will this work with the 1600 KV stock motor
it’s like a notorious 🤣but way bigger
@Bawla187
4 жыл бұрын
Exactly, lol
Would this be a good setup for pulling around my kids
Great Video, thank you. How would you say this setup compares with the Hobbywing 56113/Max 5 setup?
@ExocagedRC
4 жыл бұрын
Not really sure but they are very close to equal even considering the stronger Max5 esc. Perhaps the castle may be a bit stronger but they are so close it’s negligible, I like the sensored operation the most.
Which sprockets can you recommend to me? The sticks always break
So did that esc work well for you on the Kraton 8s too? Thanks
That's GNARLY!
I always watch the full video start to finish 👍🏿I have this to be installed my xMaxx with a 45 tooth as well🤩I also have it for my K8S w/41 tooth to be installed🤩I love this motor combo, I had the Max5 combo but sold that for two of these combos 👍🏿luv your videos EXO
@ExocagedRC
4 жыл бұрын
P8ntballa(paintballer) awesome. I’ve got a 40t on the way for the K8s. How well does yours run with the 41?
@Bawla187
4 жыл бұрын
@@ExocagedRC I haven't installed it yet. I'll do it after work this afternoon and report back 👍🏿Yup I'm an essential worker 🤷🏾♂️
@Bawla187
4 жыл бұрын
@@ExocagedRC EXO are you selling those esc mounts?
@ExocagedRC
4 жыл бұрын
P8ntballa(paintballer) no sir, but if you know a local guy with a printer he can print one for you
@Bawla187
4 жыл бұрын
@@ExocagedRC okay thanks 👍🏿
That's looks like a fun great choice.
MAn does that thing rip now! Good stuff!!
Could i use my traxxas 8s esc with a 800 kv or 1100 kv castle
Going to make me upgrade my xmaxx lol...💪🏾💯🚀🔥
Hey I got the b&m 18-35 gears and the 30-35 gears . Same motor/esc combo . Just waiting for my mounts . I bought the badlands so I can not destroy any tires . I’m glad I get to watch everyone else pave the way. I’m going to order another temp/voltage sensor so I can keep my stock setup together. Thank you again. If you have any advice I’m all ears , or eyes, or KZread?
@ExocagedRC
3 жыл бұрын
Looks like you have it all ready to go man. If you do swap out the radio consider the Flysky GT5. That’s what I run in it now.
@chriswade3986
3 жыл бұрын
@@ExocagedRC and that won’t need the temp/voltage sensor ?
@chriswade3986
3 жыл бұрын
Hey what do you think about the xlx2 800kv ? In my xmaxx ?
goodness me that flies!
Wondering if you can help me What gears are you running? And where can I get them.. also mine is also running half throttle I was going to call Castle creations
Now I need that old motor and ESC for my slash.
the temp wire doesn't have to be glued to the motor, just as long as it's plugged in the receiver. Then u can just put it wherever u want.
@ExocagedRC
3 жыл бұрын
yeah, I just figured if its there I may as well see if it works
What lipo you running and the gearing you have
That motor can is just beastly !!!
Where did you get those little jack stands?
How’s this hold up a year later ? Recommend it ?
Sweet build, I subscribed! One thing has me scratching my head though, with all the high end equipment you put into the build I’m shocked that your still using the stock TX/RX.
@ExocagedRC
4 жыл бұрын
Gregg yeah I know, for some reason I wanted to keep it and in soon so we see the temp sensor issue and how to work around it. In all honesty my radio of choice is the GT5.
@Angel-dn9sm
4 жыл бұрын
@@ExocagedRC your the only guy out here running this new setup on xmaxx and you doing very well .thanks keep going watch all your work.
@Bawla187
4 жыл бұрын
@@Angel-dn9sm I actually have this set up in my xMaxx as well. Very powerful, air control on command, wheelies at any speed.
That was awesome bro 👏😉
After running both the Castle mamba x 8s and the Hobbywing Max 5 which would you recommend and why?
Love the "rusty old Craftsman" wrench!
@ExocagedRC
4 жыл бұрын
lol
@geoffreyanderson2285
4 жыл бұрын
@@ExocagedRC I have many that I have acquired, inherited, used and abused. I value them as much as the SnapOn tools I inherited from my stepfather 40ish years ago...
Yo man! You are the man. This video is DEFINITELY getting saved for the future as well. EXCELLENT man, REALLY is!
@KruseNStuff
4 жыл бұрын
Won’t the glue melt once the motor heats up?
@KruseNStuff
4 жыл бұрын
Yes sir. It’s KRUSEN for sure.💯🤙
@ExocagedRC
4 жыл бұрын
I have no idea, I'd guess if it gets hot enough it would. Summer is coming so if it does I'll post up about it.
Can you run Dean ultra plugs on a 8s xmaxx
that is a great mod, I have watched both this video and the video for the hobbywing motor /esc set build. for the money spent, truthfully ,which mod will give me more bang for my buck when im ready to go that direction????? great video's on the Xmax. love all of them.
@ExocagedRC
3 жыл бұрын
If sensored isn't an issue for you, go with Hobbywing.
@galenlong3745
3 жыл бұрын
@@ExocagedRC Many thanks
Nice video! You’ll need to get belted tires!
Did you mention what the gearing is?
Crazy power for the size! Anyone know where I can get a xmaxx? Been looking for couple weeks now lol
WoooooW very cool
You should use some thermalpast for the sensor instead of glue
Nice build man...it sounds like a chainsaw😱 Edit: 84km on grass with stock tires??😱😱😱
@FataL-Gr
4 жыл бұрын
@@chainsaw7887 😁
Sup Exo, I love your videos. I have a quick question, do you use an external BEC for the Xmaxx? I watched your videos and didn’t see you install one. Would you recommend putting one in? Thanks
@ExocagedRC
3 жыл бұрын
I don’t. The big esc’s have plenty of bec amps built into them
@ccas5047
3 жыл бұрын
@@ExocagedRC thanks for the help Exo
What are the run times?
Question. If I'm running a 46 tooth spur, what pinion would you recommend I start with on this setup?
@ExocagedRC
4 жыл бұрын
Probably a 40t to start. My ratio at the pinion/spur is 1.2-1. So calculate anything around there and you’ll be fine.
@DSC1320
4 жыл бұрын
@@ExocagedRC perfect thank you. Was thinking 38t. Your the man 👍
Man that castle system is incredible! What if you took the receiver box out and just glued it down instead,. could you then put the esc inside?
@ExocagedRC
4 жыл бұрын
Possible
@wilsontrenton82
4 жыл бұрын
If you mount the esc sideways it will fit in the stock esc location
What if I get a solid red light on the receiver. I have low voltage cutoff turned on in the castle app.
@ExocagedRC
4 жыл бұрын
I believe that means the receiver isn’t getting signal.
@GoKaioken
4 жыл бұрын
Exocaged RC I’m a dummy! I have a castle Bluetooth link and it emits a red light. It was pointing towards the clear hole in the receiver box. Moving that out of the way shows the receiver is green... 😂 thanks though!
You the man Bro.
Hey exo, where'd u get that esc mount from? That sits on the rails? Also how'd u hook up the.temp probe to the esc?
@ExocagedRC
4 жыл бұрын
temp probe goes to the receiver, and its just glued onto the side of the motor. the ESC mount is printed
@mmakam3
4 жыл бұрын
@@ExocagedRC thanks just printed one, I'm going to do this same setup, you recommend 30/35 gears as a starting point?
Yeah I just looked at your video haven't been on it for a while but wow was that fantastic got to give it to you nice build oh and another thing people with people I'm glad you told the truth people think he goes take 10 in 15 minutes to do they don't realize that take 4 hours everything is photoshopped or film chop however you want to say it I have a couple of friends that are convinced that these cars are unbreakable I tried to tell him know these people you see breaking their cause fix them and go back to the video and make it seem like the car don't break or they fix them right away everything takes time I tried to make people understand that everything you see on videos is not what it seems to be but I am so glad you told the truth like you said it looks like 10 minutes but in all reality it took you a couple of hours be cool brother like what you doing oh and don't send your stuff to the moon like other people do you got to be rich to pay for parts that are being broken
hey really enjoyed your videos!! do you think its ok to run this 800kv motor without a motor fan? what is your opinion on belt drivetrain?
@ExocagedRC
4 жыл бұрын
I’ve never had a need to fan this motor. Besides it’s so huge just sticking a fan on it can’t do a whole lot.
@ExocagedRC
4 жыл бұрын
Not a fan of belt drives. Every single one I’ve seen in person skips.
It rips !!
I have this same setup. I love but I keep blowing rear diff gear any idea what it could be?
@ExocagedRC
3 жыл бұрын
I’ve broken a set of front gears. Are you landing while hard on the throttle? That can snap anything.
@Merciless315
3 жыл бұрын
@@ExocagedRC maybe so. Im pretty decent at jumping. Are there upgraded parts for that?
84 kph is fast and off road 👍🏻
The gears definitely sound different and wow does the truck have a lot more power.What do you think of the upgrade and do you feel that it’s worth the money.Whats the total cost of the upgrades?Thanks keep Bashing
@ExocagedRC
4 жыл бұрын
These are expensive upgrades, I think its about $600 in total just in upgrades. In stock form it runs well, you can change gearing to the 46t spur and get faster, for me this was worth it simply due to I don't like overheating issues that occur with stock setups, especially when pushed hard.
@steveshot81
4 жыл бұрын
@@ExocagedRC I just bought this truck and it's my very first RC truck or car for that matter.I wanted something big and tuff that can take a beating.I say to myself that I won't modify it but who am I kidding.I also so to myself that I will only buy this truck but I know what's going to happen.I tend to get obsessive when it comes to hobbies.I start with one and end up with 10.I start with a stock one and then fully mod all of them. I did watch the full video.I have watched another video where the guy used a metal plate to attach the ecu controller
Hello, Nice Video. Can you tell me please Where i can Get the Combo incl. Gearings in Germany ?
@ExocagedRC
4 жыл бұрын
In Germany I honestly don’t know. You may be much cheaper with a Leopard brand motor and an off brand Max5 esc. You’ll pay top dollar to get one of these sent your way.
2020 truck is the redcat kaiju pure animal out the box backflip king but we all love the xmaxx still but sheshhhhhhhh got 400 kaiju is a insane rig
@ExocagedRC
4 жыл бұрын
oh yeah I like the kaiju, Sean has one and it runs great.
generally xmaxx clips dont to justice to its speed on video. but this looked so fast !!
Awesome job! How can we mount the esc is we go this route?
@ExocagedRC
4 жыл бұрын
I'd mount it the same way, you can get these printed pieces from several sellers.
@Bawla187
4 жыл бұрын
www.ebay.com/itm/202729853480
Nice Video i Love It how is your runtime with this Setup ?
@ExocagedRC
4 жыл бұрын
Seems to be 20-30 minutes just average bashing around with 5000mah batteries.
Is that the same motor you put in the Kraton or is that one bigger?
@ExocagedRC
4 жыл бұрын
Same motor but I have two of these castle setups now. Trying to get a 40t pinion for the Kraton to speed it up a bit.
Now for belted tires...
Wont heat sink fit it
Wow
How did the temperature wire that you glued onto the motor hold up? The motor doesn't melt the glue when it gets hot? Excellent build. Very impressive man. I would love to do the same but not sure where I would get a mount for the esc.
Where did you get that motor! I've been trying to get that motor for over 6 weeks!
@ExocagedRC
4 жыл бұрын
I got them as soon as I could. One on pre order and the other was the second batch. Gotta check Castle website
why do you use such a big pinion gear. wont a 18/54 set up work?
That thing is a tyre ripper alright, what fluids have you in the diffs?
@ExocagedRC
4 жыл бұрын
They are stock, I haven't opened any of that up.
@philwebb606
4 жыл бұрын
@@ExocagedRC I've just put 30f - 50r think o prefer stock
Thats fast as f!!k
I would like to know how much did you spend on all the setup with gearing ESC and motor and I'm wondering if you upgraded the dips covers cuz with that kind of power you're probably be blowing them out oh nothing the diff covers that's a lot of powers looks like take by the way are you from Connecticut maybe I can come over and hang out my xmaxx is cool as yours LOL have fun and be safe always
@ExocagedRC
3 жыл бұрын
Well I spent about another $550 worth on the motor esc mount and gears. LoL. It’s sad but true. If I’m recording and a bolt falls out I usually just fix those but I try to show the failures as best I can.
Didnt you just hook up temp sencer
Hello if i buy the combo i have to make the same with sensored cable ? Thanks bro
@ExocagedRC
4 жыл бұрын
You can do the same with a Hobbywing Max5 and 800kv. It’s just not sensored. The sensored castle is very responsive.
@oursostv999
4 жыл бұрын
@@ExocagedRC if i dont want sensored i dont need to make that ? I already ordered this combo i love castle brand :)
I never thought I'd say this, but this seems like too much power actually. Hard to drive and will break driveline parts fast from what others are saying.
Just like the Kraton it Sounds like Sharpening Knives
@ExocagedRC
4 жыл бұрын
It is, a whole bunch of little ones. LoL
@joshsrcs
4 жыл бұрын
Ha ha
Might wanna consider a bigger wheelie bar?
@ExocagedRC
4 жыл бұрын
That or a drag skid
JUST WOW... YEA, CRAA-AAZZYY!!!
Wow....
Did you change any setting on the esc?
@ExocagedRC
4 жыл бұрын
other than arming time, motor rotation and lipo cutoff limits I don't think I did.
@gonzodetroitify
4 жыл бұрын
@@ExocagedRC what's arming time pls
@ExocagedRC
4 жыл бұрын
just P. X that’s how long it takes to arm. Factory setting is 1.5 seconds. I turn that down as much as possible to 1 second
@gonzodetroitify
4 жыл бұрын
@@ExocagedRCthis is new to me, why do we do this why do u want a longer loading so to speak time how does this help🤔, thank for the reply, this seems like a good 1 for the back pocket so ur speed was well appreciated 💯🎩
@ExocagedRC
4 жыл бұрын
just P. X just personal preference as best I can tell.
Silly fast dude
I just gat this for my limitless but I haven’t put it yet
@ExocagedRC
4 жыл бұрын
Why an 800kv for a limitless? I have a 1650 in mine and it’s awesome and I don’t need a crazy big pinion to get speed.
@v.e.s2884
4 жыл бұрын
Exocaged RC well I didn’t know what to go with so my wife gat that for me so it’s two late lol
Isn't " mod 1" when pinion an spur match like 45/45 ?
@tropicthunderbolt
2 жыл бұрын
No. Mod 1 is the bigger sized pinions.
If it just would fit into the gap it would be perfect that’s the only thing that’s holding be back to put a huge motor in it
you are a cool person...👍
@ExocagedRC
4 жыл бұрын
thank you
I don't understand how it only got 53mph which is the same as stock?
@ExocagedRC
3 жыл бұрын
Same speed but way more power
@jobbo89
3 жыл бұрын
@@ExocagedRC ah ok, but what can you do with that power aside from gear it up to gain more speed? Otherwise won't the torque destroy the drivetrain?
Diffs will be clicking in no time... Love my x but these big block motors kill em’
Gears sounded a bit loud. You sure it was on snug enough??
@ExocagedRC
4 жыл бұрын
the video makes things like gear noise, and crickets and bugs along with squeaks way worse than they are, since this video I have had to change the spur gear...sooo maybe it wasn't quite right