See how a forklift trainee learns how to operate a reach truck during his training course with 4KS Forklift Training in Birmingham
Жүктеу.....
Пікірлер: 25
@GoriksX3 жыл бұрын
Everyone who`s are saying that he`s idiot or too slow remember that You were in the same situation! I was slow at the beginning as well. Especially in My test cuz every mistake was points!
@jamiemonaco4944
3 жыл бұрын
He put the pallet too far on front wasn't hanging off even an inch
@StalwartShinobi
3 жыл бұрын
@@jamiemonaco4944 is that bad? I was taught to keep it flush with racking cuz when you take tilt off it pops out a bit anyway,
@StalwartShinobi3 жыл бұрын
Same truck I've been on and with as much space. Done well to square that up so quick, top lad
@nikkiamurphy99563 жыл бұрын
Thank you for this, I passed my reach training yesterday and I was a little unsure about how high the forks need to be when putting the pallet in the racking, and also how far you tilt them (until level) so this really cleared it up for me, thanks a lot
@4ksforklifttraining
3 жыл бұрын
We're glad this helped you Nikkia. We are loading new videos soon for all forklifts so please subscribe and keep an eye for them. Visit 4ksforklifttrainingltd.co.uk/ for more info and all our courses.
@peternagy-im4be
2 жыл бұрын
I lasted two days on a five day course. Never even made the test!!!
@nikkiamurphy9956
2 жыл бұрын
Don't get disheartened, I was already trained on counterbalance, lollop, tug and vna trucks, so it was just readjusting what I already knew, but when I first ever did forklift training I failed the first test too and had to do it again
@karlnelson75504 жыл бұрын
All well and good but inpractical in a working environment where you have targets to meet
@m4ssee
4 жыл бұрын
This dude is still training. After a few months that truck becomes an extension of your body.
@jamiemonaco4944
3 жыл бұрын
He also didn't need to look behind him as in to the right of the truck. It was racking you just need to use your brain sometimes common sense goes a long way
@StalwartShinobi
3 жыл бұрын
He will be better once passed cuz there is no pressure, whether on a time limit or not take all the time u need, no point being quick if your not safe
@danielmenezes8761 Жыл бұрын
TRABALHEI COM UMA MÁQUINA DESSA ( BARUERI -SP / BRASIL )🇧🇷🇧🇷🇧🇷.
@king75ts2 жыл бұрын
My favorite sit down reach truck. If you are doing 12 hr shifts this is the lift you wanna be using if available.
@fruitcake4t
2 жыл бұрын
do you get neck strain?
@king75ts
2 жыл бұрын
@@fruitcake4t No it had a camera on it so it helped.
@Steve-kj5zt Жыл бұрын
I work in a big warehouse where the traffic is like a big city. It is a very hard job mentally and not everyone is suitable for this job.
@babarali-tr5sb3 жыл бұрын
I am work in agility were house as a reach truck opretor
@Josh-ul1np3 жыл бұрын
Don’t you have to be 18 to use a reach truck?
@4ksforklifttraining
3 жыл бұрын
Hi Josh, According to HSE you will not be able to be trained as a forklift driver unless you are over the minimum school leaving age. For more FAQs please visit 4ksforklifttrainingltd.co.uk/forklift-training-faqs/
Пікірлер: 25
Everyone who`s are saying that he`s idiot or too slow remember that You were in the same situation! I was slow at the beginning as well. Especially in My test cuz every mistake was points!
@jamiemonaco4944
3 жыл бұрын
He put the pallet too far on front wasn't hanging off even an inch
@StalwartShinobi
3 жыл бұрын
@@jamiemonaco4944 is that bad? I was taught to keep it flush with racking cuz when you take tilt off it pops out a bit anyway,
Same truck I've been on and with as much space. Done well to square that up so quick, top lad
Thank you for this, I passed my reach training yesterday and I was a little unsure about how high the forks need to be when putting the pallet in the racking, and also how far you tilt them (until level) so this really cleared it up for me, thanks a lot
@4ksforklifttraining
3 жыл бұрын
We're glad this helped you Nikkia. We are loading new videos soon for all forklifts so please subscribe and keep an eye for them. Visit 4ksforklifttrainingltd.co.uk/ for more info and all our courses.
@peternagy-im4be
2 жыл бұрын
I lasted two days on a five day course. Never even made the test!!!
@nikkiamurphy9956
2 жыл бұрын
Don't get disheartened, I was already trained on counterbalance, lollop, tug and vna trucks, so it was just readjusting what I already knew, but when I first ever did forklift training I failed the first test too and had to do it again
All well and good but inpractical in a working environment where you have targets to meet
@m4ssee
4 жыл бұрын
This dude is still training. After a few months that truck becomes an extension of your body.
@jamiemonaco4944
3 жыл бұрын
He also didn't need to look behind him as in to the right of the truck. It was racking you just need to use your brain sometimes common sense goes a long way
@StalwartShinobi
3 жыл бұрын
He will be better once passed cuz there is no pressure, whether on a time limit or not take all the time u need, no point being quick if your not safe
TRABALHEI COM UMA MÁQUINA DESSA ( BARUERI -SP / BRASIL )🇧🇷🇧🇷🇧🇷.
My favorite sit down reach truck. If you are doing 12 hr shifts this is the lift you wanna be using if available.
@fruitcake4t
2 жыл бұрын
do you get neck strain?
@king75ts
2 жыл бұрын
@@fruitcake4t No it had a camera on it so it helped.
I work in a big warehouse where the traffic is like a big city. It is a very hard job mentally and not everyone is suitable for this job.
I am work in agility were house as a reach truck opretor
Don’t you have to be 18 to use a reach truck?
@4ksforklifttraining
3 жыл бұрын
Hi Josh, According to HSE you will not be able to be trained as a forklift driver unless you are over the minimum school leaving age. For more FAQs please visit 4ksforklifttrainingltd.co.uk/forklift-training-faqs/
Would be better with words. No music
Too slow