ProLogistix Reach Truck Training Episode 2 how to travel
ProLogistix Reach Truck Training Episode 2 how to travel
Жүктеу.....
Пікірлер: 39
@VideoArmageddon Жыл бұрын
Thank you so much for the explanation. I just got a warehouse job and I have been struggling with the steering. This helps, much appreciated.
@patpatterson4110 Жыл бұрын
Thank you so much. My co-workers did not explain this to me. I look forward to more “seat” time to expand my ability.
@ANDRE-sp2mi Жыл бұрын
Thank you for this video. I know how to operate a high reach. But it helps to know that this helps again. And to someone who does not know how to use a high reach. Thank you for this video
@SpxcyMxyo13 күн бұрын
The steering is in line with the cherry/stock picker if you're familiar.
@henryreyes15977 ай бұрын
Nice job!!👏👏
@arunsoni7051 Жыл бұрын
Thankyou, you told me the thing which was not even told by trainer and because of the i failed in interview assessment
@xBloodXGusherx2 жыл бұрын
Amazing video. Thanks.
@reyedwincontreras84593 жыл бұрын
I’m now on training and I’m using the Crown forklift standing position it’s so interesting and It’s my first time getting to know the forklift I really need to familiarize and points to be an effective operator… thank you and appreciate the review at home .
@johnquita662 жыл бұрын
I'm RT Operator for 4yrs.I have a certification from Crown.I'm from Philippines
@DJbickythemaster2 жыл бұрын
master forklift operator here and i will tell you i like yale toyota and raymond over crown but crowns the most common one now days.. they just need to do away with the distribution plate and go to the single deadman pedal so the operators feet wont hurt after standing on the equipment for 10 to 12 hours.
@flgkingpin
Жыл бұрын
Crown is trash and they need to make that trash over in China. -Raymond and Toyota for LIFE.
@DJbickythemaster
Жыл бұрын
@@flgkingpin its made in indiana .. what do you expect
@flgkingpin
Жыл бұрын
@@DJbickythemasteri drive past there (crown) sh1t hole evry day for work.
@Paul4Krista20
Жыл бұрын
The little Hyundai I like to use seems smooth and user friendly
@svampebob007
Жыл бұрын
@@Paul4Krista20 I'm way out of the loop here, I see people talking about Toyota, Crown, Hyundai all over the comments. I feel like a fish out of the water here, all I've driven for the past 7 years is Jungheinrich 😅
@tonywhite50852 жыл бұрын
We got these not to long ago and were all trying to figure it out i went full throttle backwards and crushed 4 pallats every8was laughing.
@laquitahughes80523 жыл бұрын
thank you
@khamishannah17763 ай бұрын
Nice one
@joebobel14984 ай бұрын
I’m 21 and just got forklift on a Yale, and by far it’s been the most valuable experience I’ve been through.
@Crogatho3 жыл бұрын
I'm driving an Atlet Tergo ULS Reach truck by UniCarriers on a daily basis and it has 360 degree steering. I steer left to go left when having my forks behind me. but I steer to the right to go left when I have my forks in front of me. It's easy as pie for me at this point. It's amazing to change driving direction in one motion.
@RS-do6tv
11 ай бұрын
So to go left with your forks behind you turn right
@forklifttechnicianguru51262 жыл бұрын
Good
@rabbi_dragon_slayer7 ай бұрын
“So that it doesn’t run into a coworker” - Alexa play “bitch move get out the way” 😂
@russwagner8805 Жыл бұрын
I'm screwed
@James-oz2pv Жыл бұрын
I've just passed my FLT test today but the one I used was the opposite to this. I had to invert my steering when travelling with my forks in front of me.
@MrNobody-ki2cn
2 ай бұрын
Same. It actually made me need to rush to the toilet and vomit 🤣Took me like an hour to get used to it and I've been driving counterbalance for a while before.
@nooboftheyear71702 жыл бұрын
Very nice approach :)
@user-lx6fi5zt3j3 жыл бұрын
thx
@zacharywillis78464 ай бұрын
Episode 2. Where is 1?
@jamesterrell159 ай бұрын
Real Operators don't wear shoes unless they're composite toe...💯 Didn't know Jordan made steel toes...😂😂😂😂
@patpatterson4110 Жыл бұрын
Its like a car going forks forward and opposite or inverted driving with forks behind. SIMPLE!
@NyceBoi8910 ай бұрын
How do I sign up for training in prologistix?
@Paul4Krista20 Жыл бұрын
Have not yet operated a lift that was even close to performing like another, even if the same make, year and models mostly because people destroy TF out of these lifts, both intentionally or they just suck at life in general thus kill the lifts life and quickly kill all of its suave’ min by brutal min until they finally hop out of the damn thing and leave it to heal 😢
@cv86832 жыл бұрын
Push away pull towards
@tyresemays15742 жыл бұрын
Thnks
@Duk1nfamous Жыл бұрын
Air Jordans are not safety shoes.
@jdc8352 Жыл бұрын
We use brand new hyster reach trucks at my work and they are the biggest pieces of junk. Some of them have spent more time in the shop than they have on the floor working.. Hyster quality has degraded in the last 20 years. Their end riders are big pieces of junk too. Same situation. They've gone too tech, too much silly sensors and gimmicks. Total junk.
Пікірлер: 39
Thank you so much for the explanation. I just got a warehouse job and I have been struggling with the steering. This helps, much appreciated.
Thank you so much. My co-workers did not explain this to me. I look forward to more “seat” time to expand my ability.
Thank you for this video. I know how to operate a high reach. But it helps to know that this helps again. And to someone who does not know how to use a high reach. Thank you for this video
The steering is in line with the cherry/stock picker if you're familiar.
Nice job!!👏👏
Thankyou, you told me the thing which was not even told by trainer and because of the i failed in interview assessment
Amazing video. Thanks.
I’m now on training and I’m using the Crown forklift standing position it’s so interesting and It’s my first time getting to know the forklift I really need to familiarize and points to be an effective operator… thank you and appreciate the review at home .
I'm RT Operator for 4yrs.I have a certification from Crown.I'm from Philippines
master forklift operator here and i will tell you i like yale toyota and raymond over crown but crowns the most common one now days.. they just need to do away with the distribution plate and go to the single deadman pedal so the operators feet wont hurt after standing on the equipment for 10 to 12 hours.
@flgkingpin
Жыл бұрын
Crown is trash and they need to make that trash over in China. -Raymond and Toyota for LIFE.
@DJbickythemaster
Жыл бұрын
@@flgkingpin its made in indiana .. what do you expect
@flgkingpin
Жыл бұрын
@@DJbickythemasteri drive past there (crown) sh1t hole evry day for work.
@Paul4Krista20
Жыл бұрын
The little Hyundai I like to use seems smooth and user friendly
@svampebob007
Жыл бұрын
@@Paul4Krista20 I'm way out of the loop here, I see people talking about Toyota, Crown, Hyundai all over the comments. I feel like a fish out of the water here, all I've driven for the past 7 years is Jungheinrich 😅
We got these not to long ago and were all trying to figure it out i went full throttle backwards and crushed 4 pallats every8was laughing.
thank you
Nice one
I’m 21 and just got forklift on a Yale, and by far it’s been the most valuable experience I’ve been through.
I'm driving an Atlet Tergo ULS Reach truck by UniCarriers on a daily basis and it has 360 degree steering. I steer left to go left when having my forks behind me. but I steer to the right to go left when I have my forks in front of me. It's easy as pie for me at this point. It's amazing to change driving direction in one motion.
@RS-do6tv
11 ай бұрын
So to go left with your forks behind you turn right
Good
“So that it doesn’t run into a coworker” - Alexa play “bitch move get out the way” 😂
I'm screwed
I've just passed my FLT test today but the one I used was the opposite to this. I had to invert my steering when travelling with my forks in front of me.
@MrNobody-ki2cn
2 ай бұрын
Same. It actually made me need to rush to the toilet and vomit 🤣Took me like an hour to get used to it and I've been driving counterbalance for a while before.
Very nice approach :)
thx
Episode 2. Where is 1?
Real Operators don't wear shoes unless they're composite toe...💯 Didn't know Jordan made steel toes...😂😂😂😂
Its like a car going forks forward and opposite or inverted driving with forks behind. SIMPLE!
How do I sign up for training in prologistix?
Have not yet operated a lift that was even close to performing like another, even if the same make, year and models mostly because people destroy TF out of these lifts, both intentionally or they just suck at life in general thus kill the lifts life and quickly kill all of its suave’ min by brutal min until they finally hop out of the damn thing and leave it to heal 😢
Push away pull towards
Thnks
Air Jordans are not safety shoes.
We use brand new hyster reach trucks at my work and they are the biggest pieces of junk. Some of them have spent more time in the shop than they have on the floor working.. Hyster quality has degraded in the last 20 years. Their end riders are big pieces of junk too. Same situation. They've gone too tech, too much silly sensors and gimmicks. Total junk.