rd1 96 jdm spec honda crv rare interior upgrades k24 time

Автокөліктер мен көлік құралдары

in this video we install rare jdm interior upgrades in my rd1 jdm 96 crv and go over what's next for the k24a3 kswap manual awd.
how to remove steering wheel
how to install steering wheel
how to install upper dash compartment or glove box
how to remove srs or delete air bags
how to get horn to work with new steering wheel
differences between rd1 jdm and rd2 jdm usdm
manual conversion parts, clutch pedal and handbrake swap

Пікірлер: 31

  • @stephengent9974
    @stephengent99742 жыл бұрын

    Great idea, life saving devices for a storage box,

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Hell yeah, better than a face full of shrapnel in a low speed collision.

  • @John.strong
    @John.strong3 жыл бұрын

    Sounds like you are saying air Like an American Most kiwis say ear or maybe eir? Just something I picked up on.. Keep up the content I'm planning a manual swap for an awd odyssey and trying to see if I can make it work and legal so this is good info since they are so close to crvs

  • @jdmnuggets

    @jdmnuggets

    3 жыл бұрын

    Glad its helping out. Yeah my accent is cooked 😐 mixed kiwi American lol. More work on the kswap coming soon need to get a few little things out of the way first, handbrake on the rd1 and stripping the rd5 for the awd k transmission etc.

  • @sirlapis9998
    @sirlapis99983 жыл бұрын

    Not sure if you got your mounts yet, but hasport just released a bracket for the awd tranny using the ekk1 mounts (ek subframe, not dc/eg)

  • @bluewanderer9903

    @bluewanderer9903

    3 жыл бұрын

    So that is the catch, good to know that, thanks 👍

  • @jdmnuggets

    @jdmnuggets

    3 жыл бұрын

    Ffs.. lol. Well that mount change i believe only really benifits high hp builds, somthing to do with the rear mount bracket cracking blocks? In my case it will stay in the 230hp range for a while before going full blown turbski. Cross that bridge later 😂

  • @jdmnuggets

    @jdmnuggets

    3 жыл бұрын

    Spoke to brain at hasport ekk6 mounts is what you want for awd k swap keeping crv subframe. Ekk2 will work with eg/dc subframe in the rd1 but he recommends spacing the rear mount off the eg/dc subframe by 0.4" or 10mm

  • @bluewanderer9903

    @bluewanderer9903

    3 жыл бұрын

    @@jdmnuggets nice one, thank you. I presume ekk6 will mount the engine in the same way as ekk1 in ek chassiss? Crv engine bay is taller so probably not a problem and there isn't much difference in weight distribution unless we are talking race cars at competitive level. The only way that I would swap out crv subframe is if I got a hold of 98spec jdm itr rack, any other rack is downgrade comparing to crv rack.

  • @m-dad4356
    @m-dad43562 жыл бұрын

    Any chance you sell your bull bar?

  • @FreakoRico999
    @FreakoRico9993 жыл бұрын

    BTW, next time get a non-airbag steering column part from an EK or something. Saves you of making that stuff by yourself. And maybe you could've just swapped out the inner part..?

  • @jdmnuggets

    @jdmnuggets

    3 жыл бұрын

    You mean for the horn ?

  • @justinmedina2969
    @justinmedina29693 жыл бұрын

    I NEED THAT UPPER COMPARTMENT. please tell me how to get one

  • @jdmnuggets

    @jdmnuggets

    3 жыл бұрын

    Your crv rhd or lhd?

  • @romainarindi9749
    @romainarindi97493 жыл бұрын

    Do you know the name of this part please in english ? Im french And impossible to find i try everything Thanks i follow ur work since u wrap u v’ Thanks man

  • @romainarindi9749

    @romainarindi9749

    3 жыл бұрын

    The Dashboard box i mean

  • @jdmnuggets

    @jdmnuggets

    3 жыл бұрын

    Thanks man, appreciate it. Its difficult to find, crv upper jdm storage compartment. Damo the kiwi on honda cr-v rd-1 world wide face book group can find you one

  • @newyorker1939
    @newyorker19393 жыл бұрын

    Where did you get the upper glove box compartment? My RD1 is left hand drive by the way

  • @jdmnuggets

    @jdmnuggets

    3 жыл бұрын

    I dont think its an option for left hand drive.

  • @FreakoRico999

    @FreakoRico999

    3 жыл бұрын

    @@jdmnuggets Nope, it's not.. Too bad, cause I wanted one too haha

  • @jdmnuggets

    @jdmnuggets

    3 жыл бұрын

    Maybe it could be scanned flipped and 3d printed 🤔

  • @newyorker1939

    @newyorker1939

    3 жыл бұрын

    @@jdmnuggets that’s an idea 🤔

  • @shunjakemedina1764

    @shunjakemedina1764

    2 жыл бұрын

    Hopefully someone scan this and 3d print it

  • @Marino_Built
    @Marino_Built2 жыл бұрын

    How did u stop the airbag light

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Remove the bulb 💡 😂. Well kinda... I've deleted the srs system, airbags, module and wiring.... so there is nothing left to turn the bulb on or off.

  • @Marino_Built

    @Marino_Built

    2 жыл бұрын

    @@jdmnuggets gotcha so if u disconnect the srs system from the cluster it wont light up by default? Or is that only because u removed everything I'm only asking because I'm gonna be installing an aftermarket steering wheel tommoarow and wanted to avoid running out and finding a 2.2ohm resistor to trick the system into thinking it's still there

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    Sorry the only solution i know of is a resistor or completely delete the srs, lhd obviously thats not as easy. Depends what region you're in and what the laws are around srs.

  • @julioporres6844
    @julioporres68443 жыл бұрын

    can you send me the link for the facebook group to join to get some parts as well

  • @jdmnuggets

    @jdmnuggets

    3 жыл бұрын

    facebook.com/groups/2470011324/?ref=share

  • @julioporres6844

    @julioporres6844

    2 жыл бұрын

    @@jdmnuggets how can i get the crv upper jdm storage compartment i have a ldh

  • @jdmnuggets

    @jdmnuggets

    2 жыл бұрын

    I don't think you can get one for lhd

Келесі