Man I can’t tell you how valuable your channel has been to me. I’m getting ready to build the associated truggy RC8T4 nitro with the Adam drake AD3 engine. I also want to build the rc8t4e as well. Thanks for all your videos. And yes I am a subscriber.

@SuperFastRc

Жыл бұрын

Thanks for the comment! Hope to do some more vids and a review on the truck soon. Getting race footage tomorrow!

Great truck but I have an issues with the droop screw placement.

can you get replacement bearing bushings and spare of the hinge pin locaters? looks like they made them plastic to be replaceable

Im wondering to myself would this replacement work for the buggy with the same efficiency as the t4e?

@SuperFastRc

Жыл бұрын

Yes they are the same part if you can find them.

Just built mine up and noticed the front diff clicking when braking hard. Seems to be a lot of play forward and back on the diff in the casing as if the bearings are too small for the diff case. This is causing the diff to slip on the drive gear. Shims are fine as there’s no side to side movement. Its a bit disappointing, Is this normal or have a I got a faulty car?

@SuperFastRc

2 ай бұрын

I think its a flex thing, mine does it too. No matter how tight I shim. I just got a set of the stiff carbon gearboxes in to try. Hopefully they flex less and the teeth don’t skip.

@WM84629

2 ай бұрын

@@SuperFastRc oh nice do you have a link to this part?

@SuperFastRc

2 ай бұрын

@@WM84629 Yes the front : 81652 Rear : 81653

So can you re-use the stock bearings in the original hubs or do you have to get different ones? Thanks

@SuperFastRc

3 ай бұрын

Depends on if you are using in the b4 or b3.2. If you are using with the b4 that comes with flanged bearings you will need the non flanged bearings for these hubs. If you are putting on a 3.2 the stock non flanged bearings will fit these.

@WM84629

3 ай бұрын

@@SuperFastRc Thanks for your quick response. It’s going on the RC8T4E truggy like you have above. Apologies if I’ve misunderstood you. So do I just need 4 8x16x5mm non-flanged bearings?

@SuperFastRc

3 ай бұрын

@@WM84629 actually unless you already have the FT hubs i would get these Dhawk Racing RC8B4 Aluminum Rear Hubs Blue for Team Associated RC8B4 B4e T4 T4e 81545 a.co/d/cfueEH7

@SuperFastRc

3 ай бұрын

@@WM84629 correct

@WM84629

3 ай бұрын

@@SuperFastRc they’re unavailable in the UK, are they better?

What's the weight difference between the kit and the alloy hubs

@SuperFastRc

Жыл бұрын

Thats a good question. I will check when j rebuild my bearings. I can imagine it would be more than plastic

@donnienicholson180

Жыл бұрын

@@SuperFastRc thank you sir

What track do you run at?

@SuperFastRc

Жыл бұрын

Oatesified and Barnestown in San Antonio and Thornhill in Austin

@colestaples2010

Жыл бұрын

@@SuperFastRc all the tracks are so far from me dang it

@SuperFastRc

Жыл бұрын

@@colestaples2010 If you ever find yourself in the area hmu always cool to race with subscribers!

@colestaples2010

Жыл бұрын

@@SuperFastRc i definitely will!