This got me started but no washers needed. Just hone out the center to fit and use original cup for original fitment. I used EnC sprocket and bored it out to fit new freewheel but you gave me the idea so I commend you for that.

I’ve updated my son’s mx350 with a 1000w motor and a 48v 10ah lithium battery it must have the older free wheel cos we’ve never had a problem but i now know what to do if we do great video 👍

Great video! This is exactly what I needed! Thank you so much!

Great vid! I’m going to try this on my sons rsf650. Not sure if it’s going to work though, his issue seems to be the threads between the freewheel and the wheel itself are stripped out.

Do you remember what freewheel you ordered or where from? Id love to upgrade mine before i put the new rim on it

I was lucky to find both my SX500, and my RSF650 had the “old style” freewheel. I bought 2 ACS freewheels, and will modify mine in your image; that is if I don’t cut too deep into the threads. Ugh.

Where do you get the backing ring? I want to change to bmx style freewheel.

Any idea why the rear wheel gets stucked when going backwards?

I find the stock freewheel has a lot of play before engaging the teeth. I was hoping to find the aftermarket freewheel would fit into the stock sprocket hole, did you find any others that might fit without modifying the sprocket opening?

@TimArmbruster

4 жыл бұрын

No, both of the ones I used required modification. The sprocket is also aftermarket, so you may have different experience with the stock sprocket.

Sir one question could I add bicycle wheels on this

Has anybody figured out which freewheel fits in the sprocket without grinding?

Do you know if 16t would fit 10inch wheel? Looking to fit one to a Funbikes MXR500

MX650 Rear Tire Change and Fresh Look! kzread.info/dash/bejne/oYtnmM2CYKa9ibA.html Tips for replacing the Razor MX650 or MX500 rear tire, which is a royal pain. I'm also painting the back rim and adding some spoke protectors for a fresh look.

I don’t have the tools to upgrade my son’s. Do you make and sell these? I’d buy one.

Hello Tim, thanks for all the informative videos. Today I got the MX650 for my lil one. I want to upgrade the handlebars. is it an easy swap ?

@TimArmbruster

2 жыл бұрын

Hello, yes, handlebars is an easy swap.

@patv6928

2 жыл бұрын

@@TimArmbruster , will the stock cables be sufficient length ?

@TimArmbruster

2 жыл бұрын

@@patv6928 yes

Has it broken since ?

Are the stock free wheel really that bad? I've had a second had razor mod that was totaled put bigger motor on and had plenty of miles off road! And still going strong..

@TimArmbruster

3 жыл бұрын

They usually give out, yes. But, like you, I have had some stock ones that never failed. I wouldn't replace until it fails.

@Nohoze

2 жыл бұрын

@@TimArmbruster I have a freewheel assembly from both an SX500 and an RSF650. Curiously, the RSF650 was the same as the “old style” freewheel assembly, featuring an actual freewheel, as opposed to the “new style,” single piece unit. Both freewheels were trash; and the RSF650 was fairly new. I bought two of these ACS units, and replicated your procedure; and all with a Dremel, a hammer and chisel. I did tongue touch the threads on the hubs, but each still readily accepts the new beasts. I shaved the inside of each rear sandwich ring as well; taking just enough material for the bigger ACS to fit. This eliminates the half washers; and puts the unit back together like the original design; with or without the guards. This allows, like yours, the ability to change out the rear cog if you wanted to if one wanted to acquire something stronger… I’m already thinking about belt drive. These bikes are too endearing to be logical.

@aaronwangler1463

Жыл бұрын

Our new one lasted about 5 rides

Was the shimano freewheel quieter than the ACS?

@TimArmbruster

4 жыл бұрын

Yeah it was. Although to be honest, when driving you don't really notice the freewheel noise. I thought it would bother me but it doesn't.

could you have cut off the free wheel with a cut off wheel on your Dremel instead?

@TimArmbruster

2 жыл бұрын

Yes but you might cut the threads on the hub which would be bad

Hi I’m going to attempt to do the upgrade, what diamond tip did you use in the dremel? Thanks so much for the video

@TimArmbruster

4 жыл бұрын

Similar to these .. www.amazon.com/SE-82331TF-30-Piece-Titanium-Coated-Diamond/dp/B000P49BX8

@reneasabbagh9287

4 жыл бұрын

Hi Tim, I got the new freewheel in, do I need the washers? And if I do, i place them between the sprocket and the freewheel teeth?

@TimArmbruster

4 жыл бұрын

@@reneasabbagh9287 no, between the nut and the freewheel. If the nut is holding the freewheel in place without a washer yoy could try without a washer but i felt better with the washers. Let me know how it goes.

@TimArmbruster

4 жыл бұрын

@@reneasabbagh9287 where the nuts are

@reneasabbagh9287

4 жыл бұрын

I have the sprocket then the freewheel then the washer than the screw.

A year later, how has it held up?

@TimArmbruster

3 жыл бұрын

Still going strong

Where can I find this freewheel?

@TimArmbruster

4 жыл бұрын

Amazon

Here are the washers I used on the second one. www.amazon.com/dp/B0725NKG1B/ref=cm_sw_r_apap_UqpLIx3Y87FQF

Awesome video if you can send me link on freewheel that is available on Amazon i would appreciate the only one i find is 18t thanks joe

@TimArmbruster

3 жыл бұрын

www.amazon.com/dp/B0011YEAZ0/ref=cm_sw_r_cp_apap_DyG58zS8Dx8yQ

@TimArmbruster

3 жыл бұрын

www.amazon.com/dp/B071WB2MCV/ref=cm_sw_r_cp_apap_U2qMoSZdmpWg3

@josephduval8865

3 жыл бұрын

@@TimArmbruster thanks so much for the fast reply i do still have the original wheel thankfully i put a replacement wheel that wad a hundred bucks and the kids broke it in 2 months .. i really don't want to spend 50 for the sprocket but the original wheel did last 5 plus years so if i gets couple more out of this im good ...plus im looking at some of your other upgrades they look like a lot of fun .im 51 and that bike pulls me around. My son is 16 and daughter 12 they both still ride it.keep up the great videos and thanks again joe

Hi have you tried a fixed sprocket with lock ring to prevent loosening when using regenerative brakes? I know freewheel is safety for kids but fix gear better for advanced riders and upgraded razor

@TimArmbruster

Жыл бұрын

I have not tried that

@EVO1087R

Жыл бұрын

@@TimArmbruster im trying to get the freewheel sprocket off. I must have a different one because it has the 8 prong type freewheel sprocket and a big circlip behind it. Have you seen this before? Does it have to be removed to get the freewheel off. Im using a 25” breaker bar 24mm deep socket and the 8 prong sprocket tool but it hasn’t loosened. I kind of want to shelve the whole complicated assembly and try to find a wheel with a wheel conventional bolt on sprocket.

*Has anyone found an upgraded freewheel that fits without modifying the sprocket?*

@TimArmbruster

3 жыл бұрын

Yes, there wad someone on the "Modified Razors" Facebook group who did. If you have Facebook I would join that group and ask there.

@javisuave7668

3 жыл бұрын

I joined the fb group! I have a MX650 and MX500 that needs a better free wheel

How is it holding up?

@TimArmbruster

4 жыл бұрын

Perfect.

Fix Stuck Razor MX650 Forks!! Disassemble, fix, lube, and reassemble stuck Razor MX650 or MX500 forks. If your forks are binding and won't move any more, this video will most likely get them moving again. I also show all of the internals and parts of the forks and how they work. kzread.info/dash/bejne/Y4eZw62YhayvltI.html

Audio sucks! Normalize your audio through Audacity