How to Replace Razor MX650 Dirt Bike Batteries AND Save Money - DAD HACK
Тәжірибелік нұсқаулар және стиль
How to Replace Razor MX650 Dirt Bike Batteries With BETTER Batteries that are CHEAPER! *These batteries and video advice also works with the Razor sx500.
These are the batteries to use: amzn.to/2Tcawa2
Please subscribe to my channel for more DIY and hacks - / mrgizmo211
#razor #dirtbike #dadhack
Пікірлер: 153
You the man 👍🏼 you explain it way better then everyone else on KZread
I know you made this a while ago, but we just discovered this. We got the mighty max batteries as you suggested. Your patience and detailed instructions were dead on! We did this on an MX650 model. It was a lot tougher and it took us a little longer, but it worked out and to see "the light come on" in my daughter's eyes was well worth it! To anyone that watches, follow his directions and r-wind many times if you have to...but stick to it, it will work for you just as it did for us. I can say that if I must do this again, it will go much quicker. I thumbs upped and subscribed. Thanks again!
@MrGizmo211
2 жыл бұрын
Congrats!! Getting it to work was rewarding to me as well! :)
@bethanychase7539
Жыл бұрын
Our new batteries are getting delivered tomorrow and I am going to follow the instructions just like you did. I hope it works. Thanks for the great video.
Well done. Perfect instructions. All the right details. Unbolting razor’s screws was the hardest part. Im not a “fixer” and I got it done. Thanks
I just finished my kids 650 following your video and the results were perfect. We tried to save money and get a used one, but the batteries would not keep the charge. I didn’t take off the seat, but I literally ordered everything from your links and you saved my investment. Thank you!
Thank you sir, this was extremely useful. Your patience shows us you're a dad!
Thank you for the video. Just changed out my batteries and this video really helped. It took me 2 hours because of how hard it is to get to a couple of the screws but it worked great. Thanks again
@vink6764
3 жыл бұрын
Same ...what a pain in the a$$
Thank you so much. I hadn’t seen your video before I cut my batteries out and had my first time soldering them back in. I will definitely use the clips next time.
Loving the content so far!
Thank you for this! New Sub. Bought this same bike for my 5 year old granddaughter. She loves it. After 3 weeks, the bike just died but showed "full battery" green light. Had to call Razor support, take the bike apart to fix it. Made a great memory with my Granddaughters helping me put the bike back together. It wasn't easy 😛. But I will keep this Vid in mind when the battery starts to fail. Thanks again.
@MrGizmo211
2 жыл бұрын
Sounds good! Ty for subscribing!
Thanks so much u made it so easy 👏🏾👏🏾👏🏾
I got a free Razor 650 with dead batteries. I followed your video, and I bought the same batteries. It is working and my grandson is going to be delighted. Thank you !!!
@MrGizmo211
11 ай бұрын
Awesome!! Happy to help
Done. It worked for us. Thank you!
I didn't see this video... but I used these exact same batteries and they work great! My son loves it and it is a lot faster than the razor go-kart.
How did you guys unbolt bottom battery bracket? I may need to get a L-sahped allen wrench. What size is it? Thanks for the video.
That was so easy to do thank you so much👍
thanks for the link to the batteries. my little guy is going to be so happy. you rock brother 😎
@MrGizmo211
Жыл бұрын
Awesome!
love the no-solder approach, i was horrified when i saw the factory batteries! Very easy hack, great video, and simplistic! much appreciated fine sir!!!!
Dude thank you so much I'm gonna convert my mx350 to 36v and I needed this video!!
Thanks for making this for all of us dad's attempting to be heroes....!
Very helpful! Thanks for the video
Excellent excellent instructional video. Thanks!
Excellent video. Thank you so much!
Great explanation, I’d say the hardest part of the whole thing was the battery bracket screws with the Allen key and all. But I do have one concern, I noticed that the mileage on one charge has dropped quite a bit than how it was when I first purchased the bike. Just wondering if anybody else has the same issue?
How do you troubleshoot to make sure that it is the batteries? Our Bike doesn’t even have the LEDs come on at all. No lights, no clicks no led at the throttle or on the power switch…. The charger light comes on and shows green (charges overnight) and still no lights whatsoever appear on the bike. Is that a battery issue or another type of issue? We checked all three fuses as per your guidance and they are all good. Please help…
you kick ass good job. learned plenty.
Hey body just watching your video just bought the batteries 🔋 Just quick question how did you know that that battery was the problem my bike has little click when I push the troaddlor but I think it doesn’t have enough power that’s why I’m getting new batteries
Hi, I watched your video to replace my batteries. I put in brand new batteries, the bike worked. Now they won't charge. Any idea why? I also replaced the charging port.
So I'm getting ready to build my razor and I want to do the 72 volt system but I'm going to weld a tray right underneath the seat but above the back tire to hold two of those batteries and then I'm going to have four batteries where the batteries would normally go to make 72 volts are you aware of anyone trying this I know it's going to be heavy but I don't have the money for a lipo battery right now and I know I'm not going to go as far any reason why this wouldn't work that you can think of?
Thank you I just got mine going I thought you had to sotter them you’re the man
@MrGizmo211
3 жыл бұрын
Congrats! Pretty cool that now replacing the batteries should be easy!
Excellent! You rock!
how long does the new battery last while riding the bike?
Good Video, thank you.
Is the battery in the link compatible with the mx350
Not 100% sure what that stuff is on the terminals, but if it is hot glue or similar, you could soak the glue in higher percentage rubbing alcohol, and it will soften up enough to just peel it away. If they happen to fit, might save you the trouble of clipping and crimping.
@jggrimm101
2 ай бұрын
I tried to just remove the glue. Turns out the glue is only holding down the black insulation at the ends. The wires are soldered to the battery terminals underneath.
Sir ,you are the best. Thank you, now I can ride my dirt bike with out my battery dying fast.
@MrGizmo211
3 жыл бұрын
You are very welcome!
@butterflytrickswithmichael2793
3 жыл бұрын
Yo um just one question does this make faster or slower
@AbominableGus
2 жыл бұрын
How long does it last
Thanks! Instructions worked great. Took longer than I expected. Fighting with getting the bolts off seat and battery bracket using the allen wrenches was the worse. Feel bad for anyone with fat suage fingers. ... I was able to easily peal off the glue and rubber housing to cut right at the terminal to save wire length.
@MrGizmo211
3 жыл бұрын
Nice! Congrats on the success!
@Aimon30boy
Жыл бұрын
exactly it was so hard
How the hell did you get in there to unscrew the bottom battery bracket. I cant get to it! What tool did you use?
Changed to nee batteries a d it went perfect but im still having the same issues with the green light on the charger not turning red. Iv changed the charger, and iv changed the charger port and and all connections seem nice and snug. Someone please help
Great video for us non electrical men. Thanks a ton. You took all the fear out of this project.
Plugs only fit one way. No need to mark with tape. Great video.. Those Mighty Max batteries are great. We also used them in a electric wheelchair. Better than originals. Personally I do not like crimping wires. They tend to pull out sometime. Soldering is much better connection. You will see in time how you get rot and dirt in your crimp connections
How long can you ride a razor 650 before it runs out of battery
What's the top speed on the new battery 🔋?
Good job dude!
why do you have to cut off the connectors? won't they just slide off to accept new batteries? Surely razor doesn't expect you to have do to this if you buy their replacement batteries.
I did it exactly as described and with the same replacement batteries off of Amazon. It worked great right away. For some reason the batteries won’t charge all the way despite the charger showing a green light stating ok charge. Any ideas/recommendation for why it may not be charging properly? Thanks and great video!
@rebeccakoeper8134
Жыл бұрын
same issue here, video was so helpful to perform the wiring but once unplugged from the charger no lights are on even though it glows green with the charger plugged in
How much of a difference would 15AH make?
Awesome video
Thx so much! I was getting pissed just looking at that thing 😂
Question? I did installed the new batteries you showed in the video I went 12 v 15 amps , can I use the same original charger that came with the razor 650 ?
@Chadman03elantra
2 жыл бұрын
Should be no problem. If you went to 15ah batteries over the stock 12ah, it just means the battery will supply current longer. It does not actually supply a higher current. May take a bit longer to charge, that's all.
I installed my new batteries and when I turned the on button to on, the back tire started spinning like I had the throttle pulled to max speed. I don’t know if the throttle is bad, or that silver box (looks like a mini car amp for stereo) that the throttle runs into
@rcolon85
4 жыл бұрын
You have to replace the throttle for variable speed
All this bikes. Have 3 battery??
What is the range on the battery
Great video! I was able to put the batteries in just like you did, even got the same brand. Downside is, still no lights when I turn the switch on. I checked the fuses, and they were fine too. Any recommendations what else to check?
@alvarokaison9686
2 жыл бұрын
I know im asking the wrong place but does anybody know of a way to get back into an instagram account? I was dumb lost the login password. I would love any help you can offer me
@kasencaleb3286
2 жыл бұрын
@Alvaro Kaison instablaster :)
@alvarokaison9686
2 жыл бұрын
@Kasen Caleb I really appreciate your reply. I found the site through google and I'm in the hacking process now. Seems to take a while so I will reply here later when my account password hopefully is recovered.
@alvarokaison9686
2 жыл бұрын
@Kasen Caleb It worked and I now got access to my account again. Im so happy! Thank you so much, you saved my ass :D
@kasencaleb3286
2 жыл бұрын
@Alvaro Kaison You are welcome xD
I picked a used up Mx 500 for my grandson. The front forks are all worn out, anyway to fix this problem?
@MrGizmo211
4 жыл бұрын
300zxdriver yes! Let me look up the brakes. I think they are 10-15 bucks for replacements
@300zxdriver
4 жыл бұрын
Mr Gizmo Thanks, but I said front forks .
I'm confused did you connect a black terminal to a red terminal and that's ok? Seems to be working fine I just didn't know you could do that without causing a short?
@MrGizmo211
2 жыл бұрын
I just did one at a time to make sure I matched what I was taking off :)
@Chadman03elantra
2 жыл бұрын
That's how you connect batteries "in series".
Thanks DAD!
Yes, good job
@meukow90
2 жыл бұрын
Can I use batteries 12-15 amps instead of 12-12 amps.?
Is what I do as well! FYI there is no need for 2 30amp fuse! Just need one 30amp wired from last battery red terminal to electric motor. Is just 3 fuses is over kill
@MrGizmo211
3 жыл бұрын
FamFun QuickViews great advice! Didn’t know you could do that!
Cómo arreglar el panel de la moto automática
I am looking at this bike for my son. Have you had good luck with them? I know the video is a couple years old but I figured I’d ask. Great video by the way. Did you buy a warranty with this bike? Thx so much.
@exloe5772
Жыл бұрын
i got one a few years ago when i was younger. the original battery should last long if you take care of it and use it frequently
You make it look so easy Me and my dad trying to replace the batteries: Wait where is this ?
@MrGizmo211
3 жыл бұрын
Ha! I had to do one wire at a time to make sure I didn’t mess up :)
This is amazing. Recently got one for free because the battery is shot. Thank you so much for the info!
To make this job way easier you can order a new wire harness from amazon or other suppliers that have the slip on connectors for about $15 - $20.
I bought these batteries and did exactly what you did and made sure everything was wired perfectly but when I went to turn it on nothing happened. The power indicator near the throttle only lights up when I plug it in but as soon as I take the charger out the light goes out. Please help I don’t want to go through all of this for nothing.
@bigdkobi712
3 жыл бұрын
Same problem here ): we are trying to re clamp the wires right now
@bigdkobi712
3 жыл бұрын
Fixed! If you had sparks like we did when plugging the wires into the battery, it means you blew a fuse. We got a new one from ACE and now the bike works great
@spencerherring3287
2 жыл бұрын
@@bigdkobi712 how long did it take to replace the fuse cause I did the same thing and I just wanna know if it’s hard or not
FYI you should remove the chip fuse before cutting and crimping, and use insulated female spade terminals. But great video.🤙
@k24hatch
3 жыл бұрын
@Miguel Aguilar 1:46 You can see the the small black fuse box on top of battery. If you take the fuse out of that box before doing any cutting it'll open the circuit and prevents short circuit while messing with the wires. Put it back last.
Will the battery hold charge over cold winter
@MrGizmo211
2 жыл бұрын
So far mine have!!
Do batteries in the description come with three right?
@spencerherring3287
2 жыл бұрын
Yeah
Can you pot regular battery on it instead all three battery?
@MrGizmo211
4 жыл бұрын
TIRE DOCTOR &U-HAUL DEALER I bet you could - but have not tried that
@randysurgenor4684
4 жыл бұрын
I've put new batterys in and now the charger goes from red to green have I Done something wrong
@MrGizmo211
4 жыл бұрын
Randy Surgenor can you take a few pics of what you did?
@randysurgenor4684
4 жыл бұрын
I charged the battery one at a time and now the on and off switch is on it gets bright and dim the wheel will turn just for about 2 seconds and stop. Do you think the on and off switch could be bad it never lit up till charger the batteries up separt
Can you put the link here so I. An order the correct battery. Loved your video.
@MrGizmo211
3 жыл бұрын
It is in the description of the video! Let me know if you have any issues.
@lisamaturo3422
3 жыл бұрын
Lee Schultz I found it. Replaced. Bike is getting power but now motor won’t turn over. Ugh.
@MrGizmo211
3 жыл бұрын
Lisa Maturo oh no !
@lisamaturo3422
3 жыл бұрын
Lee Schultz I bought second hand. I looked at Manual. I only have 1 fuse box. But I know it’s been worked on by an authorized razor bike shop. So I have an appt. perhaps they re wired and I just can’t get it too match
why don`t you just disconnected the connectors out from old battery?
@MrGizmo211
3 жыл бұрын
I wish you could but they have a heavy glue on them.
How long do the original batteries last
@MrGizmo211
2 жыл бұрын
Really depends on how much you use them. My boys rode the daily for years. I would say they are good for 2 years with constant use.
Please do a brake video soon. Thank you
Do the disconnect’s have to be 12-10?
@rebeccakoeper8134
Жыл бұрын
that size works well for the wire thickness.
Did you think about lithium battery instead?
@MrGizmo211
3 жыл бұрын
Hmm - I should try to use those.
Where is the video to the other one?
Do these batteries make the bike faster?
@MrGizmo211
3 жыл бұрын
I don’t think so. The same as it was new
@caydot007
3 жыл бұрын
@@MrGizmo211 thank you for the quick reply. Do you know any Batteries that do by any chance?
@MrGizmo211
3 жыл бұрын
@@caydot007 I don’t. I did have a person comment on this review that said he/she was going to try lithium batteries that I think could provide more power
Omg thank you soo much it works 💯 %
Thanks Mr Gizmo I just scored a MX650 for $40 same color as yours and the batteries are trashed I came across your video I’m ordering this batteries right away I will keep you posted. New subscriber. Thanks again.
Is there one for mx500?
@MrGizmo211
3 жыл бұрын
Same batteries work. The 500 just stacks the three batteries differently in the housing.
@NoflipAlex
3 жыл бұрын
Lee Schultz oh ok thanks
@lisamaturo3422
3 жыл бұрын
Lee Schultz I wish you could take a picture of how all the connections are put together on the 500. I think I put something together wrong after taking apart.
Originals appear to have some type of waterproofing on top...
@MrGizmo211
3 жыл бұрын
MistAtsiM yes! That is why you need to cut them. One user said you can probably dissolve the coating from them - but I cut them
@stevebuchmoyer4870
3 жыл бұрын
Squirt some hot glue on the connecters if you wanna waterproof it.
New batties but still wont charge
@randysurgenor4684
4 жыл бұрын
I but new batterys in and the charger is going from red to green have I Done something wrong
You could just taken the wax off the old one and used it on the new one . No need to cut
@MrGizmo211
2 жыл бұрын
Mine were not connected with wax
Bet if you flick the “ tamper proof” hot glue of the original batteries they already have the perfectly good connecters ready to swap the batteries 🤔
@MrGizmo211
Жыл бұрын
Nope! Would be nice though.
Dome idea clip the wires off the battery just created more unnecessary work just remove the sillacone on the wire connections just pop them off put new battery in reconnect it rather make it more complicated
@MrGizmo211
2 жыл бұрын
Mine were not able to be popped off - they needed to be cut
Great video vmaxx 15ah agm perform much better than this batteries but also cost more.
@MrGizmo211
3 жыл бұрын
Good to know!!
i couldn’t find the correct Disconnect because they had male and female
Wont charge even with new batteries
@MrGizmo211
4 жыл бұрын
Jimmy Conrad bad charger
call me crazy..... but if I gonna do that much work... may as well cut out all battery holders and put one large 36 volt LiFpo battery pack. more power, faster charge, and less weight
This is NO commentary on this video - as it was helpful - in and of itself. But, this was one of the most infuriating projects that I have done in a long time. Those Allen key screws that hold down the battery brackets, especially the bottom ones, took me literally hours. Plan for minimum 3 hours for this project if you have big hands or fingers. Nearly impossible. Painstakingly awful. If you have a bad temper, prepare to be tempted to throw tools. 😅
Oil that poor chain!