Rare Polaris RZR Secondary Clutch Issue
Автокөліктер мен көлік құралдары
www.hunterworks.com/home
This video describes how and why the "top hat" on a secondary clutch on a Polaris RZR from 2017-2020 on RZR 900, 1000S, Generals, 17 Ranger XP 1000 and RZR XP 1000's can back out.
Пікірлер: 25
Another great video for a potential problem. I've checked mine once since switching to round pugs and thick belt. All was well but I will continue to check. Thanks again for looking out for us RZR owners.
Thank you for the video, I just had this happen and this video helped my out.
Excellent info!!!
My 2021 Polaris rzr xp 4 1000 is making a noise now from the clutch area, will a thick belt fix the problem? I haven’t had my first service yet.
So when I try to torque my secondary down, the top hat spins and makes it near impossible. What could be the cause for this? Thanks.
@Hunterworks
2 жыл бұрын
If the clutch is staying still and this is happening, only two possibilities and that is, not on all the way or something broke on the spider
Can a clutch cause the drivetrain to lock up holding back on a hill. Mine is making loud noise on decel and drivetrain locked up and put in neutral and would role and then took back off
@Hunterworks
2 жыл бұрын
yes it can, we have troubleshooting videos for both clutches you can watch
@shanewillaims
2 жыл бұрын
@@Hunterworks thank you
I have the same problem
To bad there isn't a replacement one with a tiny circlip on the back!
Another option to pressing in the hat would be throw it in your freezer for a day or two (make sure the wife doesn't see it). Quickly coat with Retaining Compound and slide it in. Also, I might look into Loctite 641. Has a smaller gap fill and higher temp rating than 620. Shear strength is less with 641, but that shouldn't be a factor.
@Hunterworks
4 жыл бұрын
As mentioned in the video, a way not necessarily the way and this way is another way too. Thanks
@bigtruxz
4 жыл бұрын
@@Hunterworks Absolutely agree, more than 1 way to skin a cat. Thanks for all of your videos.
@patd4u2
4 жыл бұрын
Good comment, you beat me to it, put the hat into the freezer like you said and also put the clutch housing into the oven at around 200° for an hour and then quickly push it in. The hat will shrink a little and the clutch will expand.
Hello friend, blessings, I just got a Rzr xp1000 but I didn't test it well when I bought it and until now I realized that it doesn't go over 50mph, what could I do? Please help
@Hunterworks
9 ай бұрын
You have a primary clutch issue, find our how to troubleshoot a primary clutch video and go through it
Any major issue's with a 2020 Xp turbo clutches?
@Hunterworks
4 жыл бұрын
I would not know, we have a much smaller dealing with turbo's but I do not think they have major malfunctions other than the plastic slides in them wearing
@Bean-sz7sr
4 жыл бұрын
@@Hunterworks Thanks👍
Is this the same for a highlifter edition
@Hunterworks
Жыл бұрын
if a 17 and newer yes
52 isn't old bubba. Lol im 53 and now i feel old.
@Hunterworks
4 жыл бұрын
Is to my 20 year old son
@Richard-gy1fo
4 жыл бұрын
Same.