Your intro and endings, silence and humor are what makes your channel so fun to watch. The sand blasting box, the bowling gag and I'm sure many other gags I can't remember. You cut right to the chase, no fuss, no incessant talking. Just teardown and rebuild. Makes me laugh and enjoy every one of your videos.

@erikjohansson1814

4 жыл бұрын

sirthicen skoorb Legend has it, that he only speak once a year. It is also known, if you're Patreon you will enjoy the videos with voice.

@thewolfin

4 жыл бұрын

no talking means fewer needless jumpcuts

@dixieinstrumental805

2 жыл бұрын

He did talk when he fixed his mill

@bigniqqa4511

Жыл бұрын

Welcome to asmr restoration youtube

The Hotel Des Artistes (which like the Plaza Hotel) had many permanent residents. Some apartments were still wired DC in early seventies. We were doing some work in Mayor John Lindsay's apt and they asked me to do some handy work in this elderly woman's apt. When I entered I noticed something strange about the lighting, on a hunch I asked if this was a DC apt. before I plugged in my drill, it was and she had me go to the basement a borrow a AC/DC drill from the super. That drill was huge and weighed a ton it had planetary reduction gears I had to use two hands and when you let go of the trigger and set it down the drill kept turning for at least a minute, slow rpm but still powerful. The super told me that Con Edison still supplied DC to a few older buildings.

@charleebunch6637

4 жыл бұрын

@@koibunny4655 yes very distinct sound,an instant before complete meltdown

@thagrit

4 жыл бұрын

you know that most corded hand drills run off universal motors and they will run on dc.

@Viewer19

4 жыл бұрын

@@thagrit At the time I didn't think about, it but I am sure you would not have hesitated an just gone for it. I chose to use a drill marked AC/DC. Plus it would not have been an interesting story about DC service being supplied in the '70s which was the focus and main point of my comment not a chance for you to make an obtuse critique.

@user2C47

4 жыл бұрын

@@thagrit theoretically, you could power a simple power tool from your car. This only works if the power tool uses a brushed motor connected directly to the power cord.

@aaronbrandenburg2441

4 жыл бұрын

@@user2C47 replying to about running a tool off a car. I have used either Universal Motors or Appliance motor such a food processor Motors Med 420 volts ac that were then rectified to DC on Lower voltages for some projects in certain applications

a real Frankenstein motor with those exposed screw-in type power connectors. I just love screw in type on-body connectors like that with motor casing being made of real cast iron, all curvy and round with a nice cast base. I have a 1917 ritter dental compressor and the motor on that is just gorgeous, so is the 2 cylinder compressor!

I love how you take everything apart. Down to the last nut and bolt. A true restoration. And you're freaking hilarious!!

If there’s one thing I love about old equipment, it’s how even the fasteners were beautifully made.

@JohnSmith-eo5sp

4 жыл бұрын

Typical of pre-1940s technology

@blakecortelyou3734

Жыл бұрын

Its called pride and workmanship. I was a jet engine specialist for 14 years. They make nothing but cheap junk these days.

Looks like if you chuck it in the ocean it could blow up a ship

@onabikewithadrone

4 жыл бұрын

I was thinking of leaving a comment on how this ball reminds me of nautical mines and then I saw your post :-D

@Wildstar40

4 жыл бұрын

Yeah or a ball and chain on a old timey prisoner in black and white striped clothing.

@andreimalai2735

4 жыл бұрын

Bello, very inteesting and beautiful piece! In video, I see the plate of motor writing 6RPM at 110V! Is possible the voltage You aplied to motor terminals may be 120V or 220V? If not, my bad and excuse me! But the High rotation observed in the video indicate an supravoltage, or the motor works at different frequence(not the 50/60 Hz, maybe higher)... Excuse my bad Enghish, good luck and good jobs! :) Hello's from Romania! :D

@MazeFrame

4 жыл бұрын

@@andreimalai2735 The label says: HP 1/6 (= 0.16) RPM Volt 110 Type H No 6898 Frequency (Cycles) 60 So at 110Volts and 60Hz Input, it puts out 119W at an unknown RPM

@tech4pros1

4 жыл бұрын

Looks like the motor is a 6 pole motor by how many stator coils it has so will run at ~1200rpm no load on 60hz.

And in conclusion we would like to thank everyone for watching "how to restore an underwater mine." just remember, this can only be done ONCE

One thing I love about your videos: silence. No annoying background music or chatter. Just the job at hand.

Speaking from personal experience, I can tell you that a "tool" similar to this has "cured my hysteria" more than once. 😁😁😁

@scotthaddad563

4 жыл бұрын

Deb G a tool in the hand is worth two in the bush or visa versa????

@debdottir

4 жыл бұрын

@@scotthaddad563 🤣😂🤣😂🤣😂🤣😂🤣

@roadweary5252

4 жыл бұрын

😂

@grumpystiltskin

9 күн бұрын

We know why it has to be ball shaped...

Reminds me of my apprenticeship as an auto electrician in the eighties. A neat trick for what you are doing is to give the casing a center punch pop at each joint so you orientate the housings the original way they came apart as some can be trickily designed. Good effort.

@jamesbizs

2 жыл бұрын

The casing has marks on the inside

@Rusty_Nickle

2 жыл бұрын

@@jamesbizs yeah but that's a pain in the butt to see once you have them covered and you've got to be very specific because of the screws

Having dentists in my family for over 110 years, we are very familiar with the ball motor. It was revolutionary in the procedure of removing decay from effected teeth. before that we only had a FLYWHEEL device !

I would recommend grounding that motor. Find a good place for the ground wire. They didn't understand grounding back then. One of the safest things you can do. Cool video! Cool motor!

@CC-ke5np

4 жыл бұрын

They did understand grounding back then. But that was used for real dangerous stuff only. 110Vac was not considered as dangerous, real men had to endure touching it if they must touch it in the first place.

@straightshooter8443

4 жыл бұрын

David M it might have enhanced the experience with it being ungrounded. Lol 😂

@tfish0

3 жыл бұрын

that and rewind it first with rated materials

@saucyballs702

2 жыл бұрын

@@CC-ke5np I can stand 220v ac for a few seconds. It gets easier with practice.

If I remember correctly from my trade school days, this motor type is c all a UNIVERSAL motor. Meaning it can run A/C or D/C. Which makes it easier to regulate the speed (RPM's). Also the name plate has some time relevant traits. Such (VTS) for volts. And no Rpm's marked. Finally one would think the frame style should be "R" for round.

@JohnSmith-eo5sp

4 жыл бұрын

A Universal Motor is a series-wound DC motor (no PM)! They have high starting torque, and with no load it is not surprising that it runs very fast

@WootTootZoot

4 жыл бұрын

John Smith It ran a “medical vibrator”, no wonder it ran fast

@flinch622

4 жыл бұрын

NEMA was founded 1926, and this motor design falls before then - frames were whatever the manufacturer decided to call them. I like the grease fittings on this - old school clever that just needed a tenth of a turn once in a while to keep it lubed.

@johnpossum556

4 жыл бұрын

@Meghnad (Who roars like thunder behind the clouds) For a long while these were almost everywhere. Blenders and simple drills, fans... anything common and cheap would be a series wound motor. Dremels still are.

@JohnSmith-eo5sp

4 жыл бұрын

@Meghnad (Who roars like thunder behind the clouds) I said that - - These Uni motors can't have PM in them because the AC would demagnetize them. The stator electromagnets are CONNECTED in series with the rotor electromagnets

Love the intro! could be an 80s sitcom, Another fantastic renovation.

That chuck is so very wobbly, it finally makes me feel good about my own portable drill stand with an old but good electric hand drill attached to it.

"The new interrogator droid is ready, Lord Vader." "Very well. Bring it to Block AA-23, cell 2187. We shall see what the Princess can tell us..."

@dominicdelprincipe2583

3 жыл бұрын

@@Shrike0064 I hope more folks will get the reference... thanks for the acknowledgement! And yes, I saw Empire in the theater, 1979... what a trip... Summer, and then a cold theater with popcorn and Coke... Great memory.

@ainolcrystal6182

3 жыл бұрын

ru referring to movie "Hysteria" perhaps xD

@brianadams6628

3 жыл бұрын

Awesome!!

@Jonathan.D

3 жыл бұрын

It looks just like it!

@skeptic669

2 жыл бұрын

Great comment, you would think this would be the top comment

Very cool electric motor. I have never seen one prior to this video. A Scotch-Brite pad would be a good choice for cleaning the shafts prior to separating the housing. No metal is removed, just the crud. Thanks for sharing.

@Hellsong89

4 жыл бұрын

I was thinking he would use fine sand paper, but filing it it really excessive.

@xenonram

4 жыл бұрын

It will be just fine.

Great job on the medical equipment motor. As for me I think I would have left the ID plate unaltered.

@matthewulm9103

4 жыл бұрын

Is that why this is round? I was wondering why someone would put a motor in a ball enclosure like this.

@Charlie_Crown

4 жыл бұрын

Same here, wouldn't have altered it, but i understand why he did, it sure turned out good. They made quality machines and tools back in the day, yet another fine example, great restoration

@jjdiamond8189

4 жыл бұрын

It looks as if it was repaired at some point with medical tape I can just imagine someone in some medical facility making their own repair. lol

Should have put an LED light behind the glass, pointed to the engine :). So you could really see it operate

Hermosisimo motor! amo mucho las cosas antiguas 😍 increíble su estado de conservación!! Excelente trabajo has realizado sobre él y ha quedado reluciente 🤩 Felicitaciones!!

Love watching your videos. Your attention to detail is amazing and how you take an old non working piece of equipment and make it work is beyond amazing. thank you for sharing.

Always love to see my favourite character, “Garbage on the floor”

@pekkasaarinen2902

4 жыл бұрын

I kinda liked that new side character, Justin Case.

@kefkapalazzo9587

4 жыл бұрын

Garbage on the floor is relatable character for me

@chrismsmalley2626

4 жыл бұрын

GotF was funnier in season 1 , now he makes a ton of money per episode and I feel like hes really just phoning it in . Most eps he just lays there ..wasted talent .

@HandToolRescue

4 жыл бұрын

@@chrismsmalley2626 He's becoming an issue. I may have to straighten him out by showing him what happens to other garbage in my shop.

@chetmanley8755

4 жыл бұрын

He usually only appears in the very special episodes.

I have something very similar to this motor attached to an antique belt-driven dental drill, I will make an attempt to refurbish it to use as a flex shaft Dremel alternate. I love your videos and finally bought some Evaporust to try out (recently realized that we sold it at the hardware store I work at). Keep up the amazing restoration projects, and when I start working more I will try to support you on Patreon.

To anybody curious, yes this is for THAT kind of vibrator. The "treatment" was originally an outpatient procedure to relieve 'feminine hysteria'. Most of them look more at home in a garage than up a girl's squishy bits.

@davewolf8869

4 жыл бұрын

Did it help? nope

@Avboden

4 жыл бұрын

Actually probably not true, more of an urban legend that took off: www.bbc.com/future/article/20181107-the-history-of-the-vibrator

@jayageertsen619

4 жыл бұрын

That's why he had a Dremel attached to it. 🤔🤔🤔

@MissingNo0001

4 жыл бұрын

now i wonder how long has it been since someone actually *used* it

@paulholmes128

3 жыл бұрын

Squishy bits🤣those little Chinese balls were a bit bigger back then🏃‍♀️🏃‍♀️I need it 🔫were is it I need it🌑aaa my squishler😂

BEAUTIFUL! Particularly like the text over notes that explain products and why you are using or doing certain things. As a novice I sure wish you would go back and do this with some of your older videos. Some of them show products too quickly to even "rewind" and a novice has a hard time with that concept. Thank you for lovely work.

Wow, I felt like I'd stepped back into the 80's with that inro... That was incredible. Great restore.

@ct92404

4 жыл бұрын

Were you even alive in the 80's? Your user name screams "emo kid" Millennial.

@PeachIceCreamy

4 жыл бұрын

ct92404 rude

@ct92404

4 жыл бұрын

@@PeachIceCreamy I don't care. I call 'em like I see 'em. The Xx thing in the user name is strictly a dumb Millennial emo kid thing. They're the only ones that do that.

@haydenyeap2818

4 жыл бұрын

ct92404 bruh how can one be a kid and a millennial at the same time 😳😳

Verny nice job & video . I remember these on old Dentist drills, they used a drive cable much like the one you use and were controlled by a variable speed foot pedal . -Nate

I would say that those oilers for the spindle came from the factory with some type of wick and Singer Sewing Machine Oil for lubrication. I am basing my assumption on a very old Westinghouse Black and Brass desk fan I have. They were marketed as a three speed (the first and second contacts were actually one so some deceptive marketing way back in the late 1800's.) They were called The Tank of fans if I'm not mistaken. Mine is a pre-1900 model and runs like a champ. But that is surprisingly how the spindle oilers were on those. I would love to see a restoration on one of those.

I was born in Hammon, Indiana in 1941. I wish you could rebuild me as well as you did the motor. I have 2 metal joints and will be getting another soon. There aren't many replacement parts available for my model year. Thanks for the excellent video. It was good to see the old motor run so smoothly and quietly.

Im so excited to see you try Japanning, i didn’t know that that’s what made so much old metal look like it does but it’s so beautiful and I’ve always appreciated it’s aesthetic

I think I have seen this motor (or similar) as part of a dentist drill. It used a complex belt drive system to connect to the drill bit.

Damn, I was really hoping to see how you planned on re-winding that rats nest of copper magnet wire.

At 19:18 I thought "did he just hammer his hand with that mallet?" I went back and yep he did lol. Awesome video, I never knew such a motor existed.

@LabGecko

2 жыл бұрын

Skin heals. Enamel doesn't (yet).

Dang, that thing looks like it was dredged up from Rapture 😁 Would you kindly restore it?

@stevenb1119

4 жыл бұрын

// Insert Statement Captain America meme "I get that reference!"

@davidbradt6202

4 жыл бұрын

That's what I was thinking! It looks so cool!

@chrismsmalley2626

4 жыл бұрын

What's Rapture ? Beyond the fictional Bible sense ?

@IrishSkruffles

4 жыл бұрын

@@chrismsmalley2626 He's referring to an underwater city from the BioShock games

@Andrew-Germain

4 жыл бұрын

Its like a miniature bathysphere!

This electric motor has an ultramodern design! Bravo to the master who gave the second life, to such extraordinary device!

Kinda amazing the bearings (shaft bushings) are still good.

"Now witness the power of this fully armed and operational battle station."

@Hellsong89

4 жыл бұрын

I didnt expect that, kudos, kudos indeed.

@curlybrownk9

4 жыл бұрын

Will it destroy planets? Cuz i'm looking for a good used one.

@michaelgemmer2806

4 жыл бұрын

Do you think that exhaust shaft could be a problem? Naw, me neither ...

@theogburner

4 жыл бұрын

@@michaelgemmer2806 "I find your lack of faith disturbing."

@Skavenyy

4 жыл бұрын

Hum spanking Fat mans core is great idea ;) 🙉🙈💥💥💥🥀

Spheriusly awesome! This hand tool should be rated X...that was a dirty ball!!!🤣😂🤣😂

@cjc1216

4 жыл бұрын

Underrated comment

@birddog9708

4 жыл бұрын

It says in description it's a medical vibrator😂 what kind of hospital could this be . I know the hospital of Dr Jones.

@radiotriggered2096

4 жыл бұрын

@@birddog9708 I googled those words... The results are what you might expect. Although I don't think those things are medical, they certainly are therepeutic. However... when scrolling through the results.... this one is there too :-D Still don't know what the thing you described looks like though... www.google.nl/search?newwindow=1&biw=1120&bih=605&tbm=isch&sa=1&ei=B1r7XM_JKouXkwXE6K7AAw&q=medical+vibrator.+The+Cologne+Vibrator&oq=medical+vibrator.+The+Cologne+Vibrator&gs_l=img.3...9016.11830..12759...0.0..0.103.180.1j1......0....1..gws-wiz-img.FNZl2nBpiuU

@BillAnt

4 жыл бұрын

A well oiled ball at that. xD

Instead of wrapping heat shrink with electrical tape to ensure a fully closed insulation - if you pinch it with pliers while still hot/warm it will adhere to itself. (leave the tubing longer than the wires and pinch the area beyond the conductor) If your goal was to simply secure the heat shrink... you need a smaller gauge or one that shrinks more and secures itself through friction alone.

@oppvaskbjorn

2 жыл бұрын

Don't see the point of removing the good old stuff and replacing it with this new crap

Amazing how old stuff survives the test of time, would be interested to see what the output is (fluid dyno) for the win and sure you will sell for a mint

@peglor

2 жыл бұрын

Most old stuff doesn't survive the test of time - survivor bias is the term used to describe people's belief that this is true.

Lol, that hilarious intro was so 80's, like some sort of family sit-com thing; definitely gave me some nostalgia though.

@johnpossum556

4 жыл бұрын

It was like a combo of a sitcom and Bob Ross.

We need to covet antique machinery, tools, toys etc etc.... We have to much of a throwaway mentality in our world.!!! Fantastic job. Love your channel.

@samfosdick9874

4 жыл бұрын

I'm learning machinist skills on metal lathes and mills that were manufactured in the 40s. They would survive EMP and all those cnc button pushers wouldn't know what to do!

@frankpitochelli6786

4 жыл бұрын

@@samfosdick9874 ....absolutely.!

This has to be one of the top coolest motors and intricate restorations I have ever seen! What a great job you this on this one bud! I can't get over the form factor of this odd and interesting cool little motor. 🙂👍

Those ball type motors a super cool and quite rare. I found two smaller ones in an old homemade electric train from the 20’s and sold them for more then $1000 as the guy just wanted the motors. Nice job!

Love EvapoRust!!! And, that is a kickass Dremel motor.

Womankind will be forever grateful for your efforts....... now.... where's that antique 'Medical Appliance' catalogue gone? 😊

Brilliant videos. The right pace, not too much jaw-jaw, great skills, humour, detail. The benchmark in how to do a resto vid.

The intro reminds me of Growing Pains or something. Good work. I cried.

Oh how i love the crazy antics ol' maple syrup gets into,hes such a character!

Well, add that to my list of "Now I have seen it all", gadgets tools and whats it's. Again, thanks for sharing this great video. Looking forward to the next whats it.....Ken

I really enjoy all the weird things you find to restore. Hardly any repititions and always something to learn... and have fun doing it!

Subscribed the second the intro was over. I'm a repairman, but you're a repairman and comedy mastermind.

Never seen anything like it before wow great rescue

Loved the intro, and the faceplant on the sandblaster window had me rolling! Great restore and I just subscribed! Keep em coming!

@HandToolRescue

4 жыл бұрын

Thank you!

When you shrink tube things, use a pair of pliers that has crass-hatched grips on the tip and "crimp" the ends that don't connect to anything. Leaves a nice clean "crimped" finish.

WOW!!! Glad I looked at this video. I've never even heard of a ball motor let alone seen one!

*That's Cool!!!* I have had LOTS of Antique Motor's but never one so _"ball-shaped"_ LOL!

Got to love the Zero F$#S for safety back in the day. Nice work! Looks fantastic.

Grabbed an antique dental drill the other day, previous owner had converted it from pedal drive and added one of these! Finally I can do my own restoration!!!

Everytime you face plant the sandblaster it cracks me right up man!

No music! Hooray! Fascinating.......I’ve never seen one of those before 😃

That thing reminds me of Steamboy It looks like... a mine!

@davemarx7856

4 жыл бұрын

I had to scroll a little too far to find this comment. Steamboy was the very first thing I thought of.

@jaymccormick8385

4 жыл бұрын

We must put about 2 lbs of c4 in the thing and see what happens 😈

@the-potato-warrior

4 жыл бұрын

Looks like a motor to me...

i know it's old news and you've probably heard this before but what i've found that works really well for restoring rubber is to completely submerge it in armorall and let it sit. i restored a bunch of rubber parts from a 54 chevy like that that were so hard they were almost like plastic. 24 hours in the armorall and they all turned out soft and pliable like new.

I was waiting for the 80’s transformers music to start playing “the touch” when you pulled that apart, just like when Hot Rod pulled apart the matrix of leadership.

@johnboats9075

2 жыл бұрын

Never forget Orson wells last preformance was a a planet that ate other planets.

I loved the intro, and the bolling pin to bowling engine sound effects!!! Perfecto!!!! This has got to be one of the coolest engine shapes I have ever seen!!! Thanks so much for sharing, and for the good laughs had me rolling with the engine...instead of my homies! Ba da bump! Lol!!! Look forward to more videos!!!

@timberlywarrington5259

4 жыл бұрын

Ba Dum Tiss*

We used to have one like that. That's a dental motor with a triple arm belt driven hand piece with a contra angle when being used to a patient, runs about 30,000 RPM. Before the air turbines are invented, which runs about 400,000 rpm.

@djnitor

4 жыл бұрын

@Mike Ripple Check this out Mike it might enlighten you. www.ebay.com/itm/Ritter-Tri-Dent-Dental-Machine-Drill-Dentist-Vintage-Industrial-Steam-Punk/113565115897?hash=item1a710225f9:g:5k4AAOSwX3ZcP6Ma

Nice work, i hadn't seen one of those before so double interesting. Thanks for the share

the freezer compressor at the old butcher shop I worked at was powered by a very similar ball motor through a 5 v belt drive. the manufacturing date stamped on the compressor was 1932.

Truly Man-Candy,, Good Job Brother,, you can never have enough shop-time on your hands...!

You could use a heat gun to melt the sanded edges of the lexan to give it a smooth glossy finish. I also use a new step bit to drill lexan to avoid cracking, but your way seemed to work well.

@cpeterson877

4 жыл бұрын

He uses a lighter on shrink tubing so I believe he doesn't own a heat gun.

Belo trabalho... Parabéns,,, E viva o compartilhamento...

The wear on that eyehook suggests that this thing got quite a workout back in the day.!

@fbi1173

3 жыл бұрын

Believe me when I say it really did

Well done Mr Hand Tool Rescue! Very entertaining too. Great Prop for a Boris and Natasha Bomb!

@scott4981

4 жыл бұрын

Osmodiar minus the scroat

0:00 - I remember that show; I used to watch it on CBC in the 80's, it was on Saturday mornings, right after _The Edison Twins_ . 👍

@Katzztar

4 жыл бұрын

I recognized the tune form some 80s show, but I can't remember WHAT show XD … which one was it?

That is really cool. I have never seen a ball motor at it all. It was super cool to see the restoration. There are a bunch of different things this could be used for. I would add a digital RPM display and a different type of mount. that it a very useful motor!

awesome stuff! do you use heat shrink tubing that's lined with heat-activated epoxy? it was a real game changer for me! much more secure way to keep wires from straining at the joint.

My first time visiting this channel and I subbed just for the intro. Look forward to seeing more of your content.

Looks like something a dentist in the 1920's would use with a belt-driven flex arm on it to drill teeth. So putting a modern flex shaft on the motor is probably very close to how it was used.

@drthmik

4 жыл бұрын

It IS doctor equipment but not a dentist it was used for treating Hystaria in Women AKA it is a vibrator

I realize this is an older video, and I don't know how I missed. But the exposed 115 volt input terminals is very interesting to see. And the cannon ball shape is also interesting as well. Just when you think you've seen everything... Thumbs Up!

Fascinating! I've never heard of a ball motor. That's just wild.

@iandavies1251

2 жыл бұрын

Is this a 1910 hall engine, or, a early attempt to create the Sputnic satilite?

The intro is perfection. Cheesiness overload!😂

That is a dental drive motor off a Ritter dental chair. Scary stuff. Vibrates your head like crazy.

@jaymccormick8385

4 жыл бұрын

Fred ok that explains what the heck this cool and weird looking motor was actually used for other than chucking into the ocean to blow up ships.

@andrewc.usarmyretired8304

4 жыл бұрын

Thanks I watched the video just to figure out what it was

@lynnleavitt478

4 жыл бұрын

Exactly. Way before the invention of the water cooled, air driven turbine. Torturous to be a dental patient back then.

@brucelarsen6650

4 жыл бұрын

Okay, I stand corrected - I thought it was used on the other end. Don't get hysterical on me now.

@aftershock2222

4 жыл бұрын

Yeah, that makes sense. I taught I had saw something similar to it on old, old ceiling fans.

I'm deeply in love with your opening

@zioMav89

3 жыл бұрын

@ yes

having done some motor repair and rewinding, I think this motor is quite beautiful

This is my favorite restoration channel. I love how you can convey an awesome sense of humor without a single word. :)

The 90's into is amazing. You earned a sub just for that!

You sure find some old relics! Wild man..and you can bowl with it.

the most striking thing about old machines is that you can tell they wanted it to be EASY to disassemble with hand tools everyone has.

Your knowledge is amazing and your presentation is hilarious. I really enjoy your videos !

love your videos! personally i would have left the name plate unaltered. I was also disappointed you didnt use a crimp on the electrical connections. crimp it then shrink wrap it. electrical tape in my experience does not hold up well over time. i think the reason the drill was smoking was it was spinning the wrong direction. the cut off wheel you used looked like it unscrewed itself which should only happen if it is going the wrong direction.

I enjoy the playfulness that you incorporate into your videos!

The slapping of it was really a must I was wishing I could literally right before you did 😂😂

Whenever I see “starring Nutella” I know it’s gonna be good.

@AJ1990.

3 жыл бұрын

Wewwwrepplpeèwere22eeeeè3sèèèeèèeèeeèeseaewe

@thecodster1106

2 жыл бұрын

What is with the Nutella byw

@Voistra

2 жыл бұрын

@@thecodster1106 i think it is just a joke and he puts nutella in random places but idk

@martin8313

2 жыл бұрын

@@thecodster1106 grease, I guess

That's a heck of a stator! Very well built motor.

Oh my gosh I've never seen such a thing, I need one for sure.

Very well done and a very rare motor indeed!

That intro is the best. Don't ever change it!

Nice work maybe you could ground the green wire on the main body on the motor much safer this way.

@bairfamilyfarm1336

4 жыл бұрын

That's not a maybe, it WILL make it safer. In the event a ground isn't avaliable, make sure the neutral (white) wire is what you touch. If you look up diagrams for breaker panels (main panel, not sub panel) the ground is tied to neutral and provide a quick, low reistance path neutral and hot to short circuit which trips the breaker. It's best to test with gfci when possible, even a small current on ground would trip the breaker.

@rene-yvescote3954

4 жыл бұрын

@@bairfamilyfarm1336 Agree but I was refering to the earth ground, the copper rod in the ground or what ever ground available in you sector like grid , wet. floting ground.etc

@leecaptis5865

4 жыл бұрын

Enjoyed how he waved off the lack of a ground connection for the green .. Things were "at your own risk " those years ago.

I wonder if the ball motor was for functionality purposes or cosmetic. I looked up "japanning" on the internet. I learned something new, today. Thank you.

I've seen one of these complete in an oddities museum a few years back though not so big, it had an attachment on it about a foot long that then turned on a right angle extended a few inches to become the shape of an upside down mushroom about 3 inches across as only intended for external use. The one I saw was complete with gimbal and pulley system as to render it completely and easily mobile. Funny enough at the time it was this system of counterweights and steam punk esq design that I thought so interesting. From the appearance of the one I saw it most likely used a counterweight on the shaft which would make the entire motor shake. Which could explain why it spins so fast and also explains the excessive wear on the ring.

@stevenjones651

2 жыл бұрын

Aw man external use only😒 i saw this and thought, colon cleanse!!

@christianfritz6333

2 жыл бұрын

@@stevenjones651 believe it or not it was more "Medical vaginal stimulation to prevent bouts of histeria." and yes, you read that correctly.