My friend thank you for sharing your experience on this work. I have a recommendation for you as a mechanic, you need to start wearing gloves 🧤 to protect your skin from cancer. The oils and lubricants you have been handling over the years has been sitting under your skin, which will eventually become cancerous. A lot of old mechanics don't enjoy a long and healthy retirement because of the prolonged exposure to petroleum oils and lubricants that penetrate their skin.

@miamiautomobile5566

Жыл бұрын

Thanks so much for the advice, may almighty God bless you

Nice video

Keep up the good work bro 🤙🏾

You are the best bro. I did similar thing to my LR3 engine while overhauling but kept having cylinder 2 and 4 misfires even after changing the coil, injectors and spark plugs aside from this, the engine run smoothly without oil-burning and bearing noise again.

@miamiautomobile5566

2 жыл бұрын

Nice one from you, if cylinder 2 and 4 keep misfiring check the valves and the compression of of the cylinder 2 and 4 and compare w other cylinder

@adesanyaadebowale8964

2 жыл бұрын

@@miamiautomobile5566 I found a small pitch on the intake valves of 2 and 4 and replaced. Engine is smooth out now. Thank you

@jhonnytaveras9107

2 жыл бұрын

Hi dear l have the same problem in my Range Rover sport engine 4.2 some cylinder misfiring l change coil spark and and injectors and have the same problem l thing l think the timing engine is get out so what you do in yours?

@jhonnytaveras9107

2 жыл бұрын

I have the same problem in my Range Rover sport 4.2.some cilínder misfire and l change spark coil and injector but l have the same problem l think the engine timing is get out

Nice job Miami, Weldon!!!!❤❤❤

@miamiautomobile5566

2 жыл бұрын

Thank you

Perfect 👍

Nice one bro

bonne idée

Good video mate😊

Спасибо помог

Brother thank you for the video. I just rebuilt my 4.2 L supercharged . I set the timing like you showed and followed the shop manuel. After removjng the key and locking bars i spun the motor by hand. After a few rotations i tried to line evrything up with locks again and its slightly off . I did it twice with the same results . I dont know if iys normal or not any advice ?

@miamiautomobile5566

5 ай бұрын

Just make sure the crankshaft key is on 6 o'clock and on the four camshaft cut is flat using a flat bar to align the camshaft and you are good to go

Is this the aj41 jag engine?

@miamiautomobile5566

Жыл бұрын

This is Range rover sport 4.2 supercharge

Good morning please i want to ask the down timing is 6:00 i want to ask what is it going to be on piston is it one and four please i want to know because am working on one in my shop

@miamiautomobile5566

Ай бұрын

3 and 5 will be up when it is at 6:00 o'clock

@miamiautomobile5566

Ай бұрын

Up you have subscribed to our KZread channel