Nice clean work area.

That thing is badass!! I’m definitely doin that to mine!!

Love my 350!

That's dope bro I use the same exact quad that's motivation to make mine like this 🔥

Looking good! Maybe I'll see you out there at Mud Jam. I'll be heading out there tomorrow after work.

@irishginger6887

6 жыл бұрын

Swamp Ass what time of year and where abouts is mud jam

wow your 4 wheeler looks nice. my uncle has the same 4 wheeler you got, his is a honda too. i like the electric shift 4 wheeler's. honda's are awesome. i like your 4 wheeler so much. very nice

damn that thing is sharp , can't beat Honda

@jeffreymoran6234

4 жыл бұрын

I have one with 786 miles on it, I have 2 inch lift, outlaw tires,I keep up with the big boi's on that 4x4 ES 350

@joshuabeanblossom8371

3 жыл бұрын

@@jeffreymoran6234 do you have a gear reduction?

Looks great brother I prolly woulda added axle paddles

Picking up mine that looks exactly like this but it’s been sitting for 8 years

👍🏻

how'd that front end hold up with those big tires? looks good, my bike, wore the bering seat out with big tires, Bering slipped in the race wore it so it didn't press in tight. mine is a 350 also. Heavy mud runs kill them poor fronts with big tires.

Did u do a gear reduction?

I’m wanting to do a fo-4 or fo-14 exhaust on my 02 rancher 350 what do I need to carb for it to run good ? Jet sizes and it has a 2” snorkel on it already . Or can I just run exhaust and leave carb alone

Does that exhaust long pipe do anything to your power? Is that strictly for water riding so it's not submerged? Thanks

I love old hondas ,but am a fan of the stock look not the crazy snorkle and exhaust. Looks good though minus that.

What did you do about the water in the motor when you got it? I just got one for 100 bucks has water in the motor told me smoked when they pulled the front plastics and seat off. I like your bike that's the look I'm going for

Yea I’m wanting one I think I’m getting one that is yellow

Did you have to jet the carb with the tractor exhaust ?

If I put a f0-4 or fo-14 on my Honda rancher 350 do I have to jet the carb or can I leave it alone ???

What brand are the disk breaks I have some of SuperATVs on my 300 and they do not have good pressure at the lever How are the ones on the rancher and do you know of any tricks to make mine better iv bled them several times and it doesn’t get better

Do u need to re jet the carb if I do exhaust and uni filter?

Them Hondas are the best ATVs you could buy I had one a couple years back I beat the ever loving dog shit out of it I replaced every plastic an on it I can’t complain about Honda From the radiator being jammed with mud to being rolled over to being almost ran out of oil it took a liking and I finally just got rid with a rod knock probably had 12,000 miles on it

@Solitude313

6 жыл бұрын

Yea this Rancher has done some things that surprised me completely. I love Honda's and just bought one this weekend.

What is the PVC you need for the snorkel

I'm curious what size lift you got on there

I have that and mine was sitting at my cousins for a long time and the carborator and brake lines weren’t working and it has a lot of stains on then motor part by the foot breaks how can I get them off

What is the offset of those wheels? 2+5? Standard SRA rear wheels all around?

pulls good in mud with 28’s and no GR?

Im watching this after 4 years

How did that fo4 without the exhaust snorkel I want something for my Suzuki that dosent sound like it's farting 😂😂 but it already has a muffled sound but

How did you seal gas cap?

What website besides eBay do you use for tuneup parts?

just wondering did you have to rejet the new carb and if so what did you use ? Doing the same build on my 2000 Honda rancher

@Solitude313

5 жыл бұрын

I did tweak it a little bit. Mainly with the Needle and A/F Screw.

@bradleywalls2992

4 жыл бұрын

So did you not re jet the main or pilot jet?

What is your secret on bringing back the life on the plastics. I think you did a real nice job on the bike.

@Solitude313

6 жыл бұрын

Pretty much just a good wash and Cover All is all I use.

@MrGunner945

6 жыл бұрын

SC1 High Gloss coating also works great for plastics, especially for bringing back faded plastics. It also helps with cleanup, due to the dirt and mud not sticking to the SC1.

+SolitubeCustoms Ok Cool Thx for responding to me

Do u ever sell any of your projects

Can u make a video of how you seal up your air box ?

@CalebWaddleMedia

7 жыл бұрын

FoxRacing238 there are 3 main places where you need to all the seals as in where your snorkel come in around the carburetor seal and the hose on the left side as well as the screw on the outside and then the lip of your lid put silicone on that then just stick it on lock it up.

if my bike dies underwater do I need a exhaust snorkel or idle up carb?

@dannyreid1845

5 жыл бұрын

FTW_Shadowz I have the same problem

How did you go through mud with the electric shift solenoid because I heard if you get mud in it it will stop working

@laynewilliams2353

5 жыл бұрын

Thats true but if you seal it is fine

Do you think I could run 29.5 tires on a 350 2wd? With no gear reduction

@srvdean3024

3 жыл бұрын

hell no

Why the baffled fo-4 over the fo-14? Sweet bike

@Solitude313

7 жыл бұрын

Just trying to be a little quite. Getting old I guess haha

0:30 sounds like a crowd cheering

Do you have to snorkel your exhaust? I had my Honda exhaust deep and it wanted to cut off. Any solutions??

@trevorcisco9220

4 жыл бұрын

You don’t have to snorkel it , but it is sometimes good to depending on the riding you do. With an exhaust snorkel it ensures you won’t get a drop of water in the engine

What do you use to clean the engine? That brown baked on mud is hard to clean off

@Solitude313

4 жыл бұрын

Eagle One Etching Mag and Wheel cleaner

@davidp1922

4 жыл бұрын

SolitudeCustoms thanks I’ll give it try...nice videos

Never really known but what’s the point for the exhaust snorkel

@Solitude313

6 жыл бұрын

Just a little piece on mind, keep mud from packing up the exhuast.

Oh sorry I didn't realize it said it in the video

@Solitude313

3 жыл бұрын

No worries, Just a 2"

@brettknowles7447

3 жыл бұрын

@@Solitude313 ok thank you

What’s the exact wheel set up here 28x9.5x12 all the way around?

@Solitude313

4 жыл бұрын

Yes, thats it, on SRA Wheels

could u fix mine like this one

What did you use to get the mud stain off?

@Solitude313

7 жыл бұрын

Eagle One Etching Mag Wheel Cleaner

Do you sell stickers online anywhere?

Where did you get your exauhst snorke or did you bend it yourseld

@Solitude313

7 жыл бұрын

Caleb Waddle I just went to the local Muffler Shop and had them bend it up for me. 1.5" I'D with a 45* Bend then a 45* Flush Cut

@CalebWaddleMedia

7 жыл бұрын

Ok thank you I have been looking into a better sounding exauhst and I like your ideal a lot. Not wanting to spend 300$ on a an exauhst

Poor thing!

Where did u get ur muffler and how much did u pay for it

@Solitude313

4 жыл бұрын

Tractor Supply Company, only about $30.

How is it not ticking my rancher 350 ticks bad on top end

@Solitude313

3 жыл бұрын

It was a relatively new Rancher and the motor was never gone into. Also I just adjusted the Valves and tuned the Carb just right.

Does the owner of this Rancher have a channel?

what size lift kit on front and rear?

@Solitude313

7 жыл бұрын

Just a 2" Highlifter

Where are you located I need someone to snorkel my bike

@Solitude313

4 жыл бұрын

Im in East Texas by Longview

Whats the offset on the rims you used on this setup?

@Solitude313

5 жыл бұрын

They only offer 2, IRS and SRA. These are SRA all the way around to avoid wheel spacers on the front.

@dwilson8370

5 жыл бұрын

@@Solitude313 thanks for the response! I figured that's what ya did but wanted to make sure. I got the same rig in orange and like your setup. Thanks again!

@durtysouthkustomz8862

5 жыл бұрын

@@Solitude313 what tires are you running on there like name and size and is that a tractor muffler that you used to do the exhaust

Where did u get the exhaust extension at would love to no. Thanks

@Solitude313

7 жыл бұрын

Any muffler shop can bend you one. 90* to a 45* and cut flush.

@hondaforlife1236

7 жыл бұрын

Ok thanks

@hondaforlife1236

7 жыл бұрын

How much did they charge u?

@Solitude313

7 жыл бұрын

$20

@hondaforlife1236

7 жыл бұрын

Did u get it at a shop somewhere around longview tx

How do you snorkel the electric shift????

@Solitude313

7 жыл бұрын

Whats there to snorkel?

@rzr8hunnid517

7 жыл бұрын

SolitudeCustoms is there a gear reduction

@bradyriggs528

7 жыл бұрын

SolitudeCustoms the angle sensor!

Do you sell Solitude Customs decals?

@Solitude313

6 жыл бұрын

I need to find a good supplier and I will, I want to.

Does it have a gear reduction

@Solitude313

7 жыл бұрын

Nom and it actually did pretty dang well this weekend, even in the thick stuff

Does it have a gear reduction in it?

@Solitude313

6 жыл бұрын

Yuda Sifuentes No, not yet.

@yudasifuentes2068

6 жыл бұрын

SolitudeCustoms i was looking one for my rancher 350 es

First to comment

LMAO!!!!

+SolitubeCustoms I have a 01 Honda 350 rancher the same color .

@Solitude313

7 жыл бұрын

I had one set up this exact same way but I had a Gear Reduction.. It was a fun little wheeler.. I just dont care for the motors

$700

How much was the exhaust?

@Solitude313

7 жыл бұрын

Jacob Humphrey like $35 for the Muffler and $20 for the Snorkel

@johndutton7191

7 жыл бұрын

SolitudeCustoms hey man lookin at this 300 it's smoking he said that he just got new jug and piston put in but not rings or valve sell and it's still smoking would that be true or could it be anything worse? Thanks

@Solitude313

7 жыл бұрын

Got to have the head reworked with at least new valves seals usually.

@johndutton7191

7 жыл бұрын

SolitudeCustoms what would you all do to make sure it it would work