Ehhh I think you also removed the oil slinger thingie. You will kill the engine like that sooner or later, so you may want to put a new one in 😂

well alright bro👍just found out you been on here for years lol didn’t know until ya started messing around with that mower!🤷‍♂️👍

Every time he brought up bad news it should’ve brought up the Meme when they ask you how you are, and you say you’re fine but you’re really not fine

I just found your channel dude, I'm digging it. I wanna try and do some content like this on my drag bike soon. I'm pumped to see the mower running!!

I love to see ppl messing with mowers like me! Keep it going my man!!!

J b weld will work perfect for cracked aluminum engine cases. You wont have to mess with those weird melty rods lol

This is the exact model of mower I just picked up for a mud mower conversion. So this should be helpful lol

Hey bro I need that throttle pedal because I’m actually working on a similar mower with the same engine

I put a push in decompression valve in out of chainsaw then x2 lol then I put 1 in from a Harley Davidson still working great now Tip When your welding you should put a cone/tip on your torch to get a more focused flame or buy a tig lol Good videos bro

Awesome video thank you

Swaggy videos dawg✨️

It’s the compression release on the cam shaft. They break all the time. It’s not the valves

Love your videos and keep it up and your videos inspired me I am 11 and I saved up money and bought a lawn mower and I am converting it into a racing on because you inspired me love your videos stay safe

@TylerChaseMotors

Жыл бұрын

That’s awesome to hear! Good luck bro 🫡

@rackal3753

Жыл бұрын

I love to hear things like that. You are doing something that most kids don't do anymore: actively desiring to learn and work at something and showing enthusiasm to gain knowledge and experience.

@LVBeatzMusic

11 ай бұрын

Im also pretty young(im not going to disclose my age becuz of my parents sake), im also building a legit lowered pulley swapped race mower.

So under the plate you push down the plate you mount to the mower on top of the plate you mount to the mower there should be a screw You can adjust how much throttle you can give it

by random chance if the algorithm, this series was blessed upon me i should probably go work on my racing mower.... works fine, but it has a flat tire and the hood can't go on because a part broke old craftsman with a V-2 engine

@MinecraftTypesGamingCZ

Ай бұрын

How is it all holding up ? I'm planning on building a go-kart from a lawnmower, or some kind of a vehicle. I still can't decide between horizontal and vertical alignment...

@rolengoldslick9053

Ай бұрын

one destroyed tire, and i never finished it! got busy with bigger and better things, and family got a new side by side so its purpose is obsolete

Can u post a link to the throttle pedal or tell us where u got it from because i cant see it on amazon. thankyou

Thanks for the help just slammed my mower to the ground needed help[ with a throttle thanks

that hitch that was in the back needs to be put back on, without it your transaxle will blow up. The orange peice was also the oil slinger so that needs to be put back in too.

This mower is nearly identical to my trail mower when I first got it except mine was a 16 hp now it has a 28 hp intek vtwin the original motor is now on my dads mower that I built for him (his cuts grass) I posted a short of my vtwin

I could be wrong but I think the best practice would have been to grind a groove in the crack with like a dremel or a die grinder before you aluma-welded it. If you decide to go back in I would give that a try. That being said I'm really enjoying the content!

@TylerChaseMotors

11 ай бұрын

You're right, I tried to notch it with an angle grinder, which kind of worked. A lot of the process I didn't record and I actually went back and tried to redo it again. I really couldn't get the metal hot enough to pull the aluma-weld through the crack. Also I'm not experienced with it so I'm not fully blaming the aluma-weld or the torch haha

where’d you get that throttle pedal?

What size shaft is the engine!?

here before the Fame

Psyched to find out you can add a throttle pedal to a manual gear shift mower! I wonder if that is part of why the throttle is less smooth than on an automatic/hydrostat? (I don't know sh*t about engines yet, really).

@TylerChaseMotors

2 ай бұрын

Dude that’s why mowers are so cool, they’re the simplest engines you can possibly play with. I love my complicated engines too but the mowers teach you so much about engines.

To funny i noticed that when you put the cam in

tyler if u ever come to Massachusetts hit me up i got a bunch of parts for that mower and another riding load mower with no engine but everything else is on it

@TylerChaseMotors

Жыл бұрын

Good to know, thanks!

That little orange piece isn't just the governor. It's also the oil slinger.

@TylerChaseMotors

Жыл бұрын

Oh shoot you are definitely right… I’m going to have to replace that and figure out a different way to “delete” the governor. Thanks for the comment!

@mad-mason0319

Жыл бұрын

@@TylerChaseMotors glad to help. hope you didn't kill the motor. Make sure you check the bearings and cylinder bore while you have it apart! It's gonna suck having to completely tear it down but it's better than putting even more money into it just to have it die preemptively.

I’m building one as I speak

I got an entire engine (31R977) for free thanks to our "mechanic" at work who doesn't know a whole lot about small engines, and didn't want to listen to me when I told him it was the cam shaft making it not turn over. Oh well, 30 bucks and I got a running engine for my DLT3000.

Grind your metal down before welding

Hey man you should put a oil slinger back in that motor or she’ll die, it’ll be like you running out of blood.

@TylerChaseMotors

11 ай бұрын

You’re right, I made a video about it

Remmember me when you'll get famous!!! Good videos as always with da lawn mover...

If I were you I would swap the motor those just are terrible I had ine in my mud mower and i had to adjust the valves so many times . And I checked everything out and nothing inside the engine was broken .

@TylerChaseMotors

Жыл бұрын

I’ve got a spare Kohler v-twin that is probably destined for this mower once this one fully goes

@zalmanfans1334

Жыл бұрын

@@TylerChaseMotors that's probably not a bad idea lol .

@joshmanis9860

Жыл бұрын

These motors aren’t bad if you take out the bad stuff as in the AVS, the cheap 3 piece cam replace that with a old cast iron cam and the new reinforced head

You MUST take out the AVS or it will blow the back of the block out

@TylerChaseMotors

Жыл бұрын

I have a 18 hp Kawasaki v-twin that I'm going to put in this when the Briggs blows...

@joshmanis9860

Жыл бұрын

@@TylerChaseMotors good choice