Quick Tip - Installing a Solar Panel Motion Security Entry Light
Тәжірибелік нұсқаулар және стиль
Exclusive 30% discount!!!!!
30%OFF Code: 93U8GC5C
Start Date: 02/09/2022
End Date: 02/28/2022
Brighten your entryway using a solar panel motion light.
Here's a link to the light used in this video:
www.amazon.com/dp/B08Y6NGHZQ
Пікірлер: 22
I think that you made a wise choice on this light, Tom. Thanks for the video and I hope that you have a great Sunday.
Smart with the solar option! I really like how bright those LED flood lights are. I have one above my back door, bit it is hard-wired. Thanks for sharing.
Might became good thing for you to add a few more on that side of the house
Great video. I recently bought one and may use stronger screws as well. Will install on a wooden shed so will cross my fingers
@AlleyPicked
Жыл бұрын
Been a year and a half and it still works!
@bretsalowitz
Жыл бұрын
@@AlleyPicked I ended up just using the screws and anchors it came with. Time will tell. Love it so far
Question-what happens if you drill directly on the vinyl part of the house?…(i.e the folds)
@AlleyPicked
Жыл бұрын
Not much. You just want to be sure no moisture gets in.You can use a rubber washer around the screw or a little caulk. It probably wont get in anyway, but just in case.
@celestialknight2339
Жыл бұрын
@@AlleyPicked Wow, thanks for the quick response! I’m a total newbie when it comes to this stuff, but I’m trying to do this for my parent’s house lol. Just wanted to make sure I’m not risking electrocuting myself haha. Also one more thing (I have the exact same model light btw): How far do you need to hammer in the wall plugs (the plastic pieces that hold the nails)? All the way in, or just until their “arms” get through? Oh and lastly, do you think I can get away with punching a hole using an electric screwdriver?…Or will I need to borrow my neighbor’s drill? Thanks!
@AlleyPicked
Жыл бұрын
@CelestialKnight23 The light should be mounted using screws. It nails. If you are screwing directly into wood you will not need the plastic wall plugs. I would drill a hole through the siding. Of you screw right through it, it might Crack. Hope this makes sense.
We have one of these lights, no instructions, it worked a few years ago, but was put away in a shed. i have tried leaving it all day in the sun to charge the battery, but i cant get it working. Any ideas, i have thiught about replsving yhe battery bug can not figure out how to change it. Anh help would be appreciated.
@AlleyPicked
2 ай бұрын
Unless you can easily get to the battery it is probably sealed in and cannot be replaced easily. Probably better to get a new one.
Its no longer available 11/2/23 😢
I bought one of these to light my 12 ft gate as it opens or closes. It works fine for people and dogs just not my gate, ANYONE know why?
@AlleyPicked
4 ай бұрын
Is there a sensitivity adjustment you can try?
Gosh, snow!
@AlleyPicked
2 жыл бұрын
Want me to mail you some?
@ericsikma4764
2 жыл бұрын
LOL! Saw those comments and "had to" crack up a bit. Lived in Alaska for 26+years and I'm STILL not a fan of the "white stuff". PFF! I no longer live there and I admit that it's nice to look out the window these days and see...ohh...I dunno...LAWN. SIDEWALK. GRAVEL. ASPHALT. Hehe!!!!!!!!!!!!!!!!!!!!! (Oh. In fairness, we DID have a snowstorm back in December. It didn't last long, though. Was odd this year to call up to Alaska and hear, "Oh, yeah! We've had about 8" or so since about the second week of September!") It was about a month early. First time since 1992.
@AlleyPicked
2 жыл бұрын
I will never miss this snow and cold either....maybe someday :-)
@ericsikma4764
2 жыл бұрын
@@AlleyPicked The keyword in that response is "MAYBE". Then again, personally I'd lean toward the negative on that one and say, "Maybe not." Hehe!
No instructions in package
Flash light .