I have a FE-186 which I find 'OK', but not great, but I later bought the FE-183K and I absolutely love it!! 😊 I like the easier to clean nozzle system, however, the way it sprays is solid, and - pardon the pun - fluid! It just goes down beautifully; I primarily use Vallejo Model Air (un-thinned), and I've also tried the 3rd gen AK acrylics (with their 3rd gen Thinners) and they go down a treat too - and are almost bone-dry within about 10 minutes..!! Fantastic!! 👍 I like the idea of the trigger on this FE-116, so I'll have to see if I can find one.... 😊 Thanks for the great, and detailed review... 👍

I have used the Fengda BD-116C for over 18 months now, as i needed a pistol grip air brush due to me having arthritis in my hands and just in the last couple of months purchased another three with Quick Release Airline Connectors, the one thing that i do is to sand and polish the needles this air brush serves me well

Oh Sh!t.. I want one now ;) Thanks for this vidéo!

I had a stroke, so I can only use a trigger. I have the TRN1, which leaks a lot from the trigger area. The Fengda looks great! I going to get one, it may not leak so bad. Great information on the lubricate too.

What a cracking video ! The takedown and re-assembly was surgical in its execution. Then you said you served in the RAF which explained the precision. My take on the airbrush scene currently, having started with Badger and have had an Iwata hp/ch for 15 years is nothing but approval of these lower priced brushes. I have just bought the Fengda 134 and 186k after been given a 180k earlier. These products are not far off Iwata quality - with minimum fettling they will perform very well - have you noticed how Iwata prices have inflated to ridiculous levels recently? The Micron is now selling at £ 500 + , its clone the 180k , is less than £ 25 - is there that much difference ? I think Iwata are fearful of the threat that these products pose to their business and are trying to up the ante to position their products to the people who just buy the name, not the product. As a mechanical engineer I would put the overall take on quality at 90% of the Iwata - finish is excellent , fit is good - but with only one sample, tolerance is difficult to establish, but a little lubing will smooth things out. If you had nothing to compare this to I would say this airbrush was first class. There is also a spares facility in the Netherlands to back the product up - what's not to like ?

@JenesisDesignsandModelcraft

7 ай бұрын

I can't disagree for the most part. There is absolutely no doubt that these airbrushes are punching above their weight in value for money terms!

Thanks for a good balanced and informative review. I wish that I had encountered these 4 years ago when I took up the hobby again. I really find it challenging with my older, jerky or cramping finger to keep consistent control of a trigger. Started with a cheap “ Spirit“ outfit - nightmare nozzles. Then got a Fengda 183k earlier this year, much more civilised to clean. The glib elites who frown on the gun style need to experience some arthritic or cold, cramping knuckles. Cheers J.😊

The Fengda’s are not bad at all. I have three now. Can’t remember off hand which models they are but I keep one for fine detail and the other two with a .3 and .5 needle for the rest (and an assortment of needles). Saves having to swap about and cleaning in between when painting. I’d have loved to see the 0,8 needle in action 👍🏼 Great review Jen. All the best, Ian

The best review ever!

I did wonder about those things. does the single action make it easier or harder to control? I do use a Fengda 183K kit (under £30 atm), and do find the bullet nozzle a lot easier to deal with thgan those tiny things you normally get - and break off far too easily..

@JenesisDesignsandModelcraft

Жыл бұрын

It isn't single action. The first part of the trigger travel is air only, then the paint flow feeds in. It's very intuitive to use once you get a feel for it.

Excellent review, thanks. I’m completely new to airbrushing. Could you answer a question please?.on the fedga FE180 you first hold the trigger down to get air and then pull back for paint, two actions. With the 116C do you get air and paint at the same time and would this cause paint to settle on the needle. Thanks

@JenesisDesignsandModelcraft

3 ай бұрын

The trigger has two stages, exactly like a full size spray gun. So the first pull of the trigger delivers only air, and when you pull further you get the paint. From the point where paint begins to be delivered, the more you pull the trigger, the more paint you get.

Great video... but if you want absolute trigger control get the Colani a little pricy but its woth start with 0.4mm extra needles are sold separely good luck.

Hey..Iwatalube is a lubricant applied to the needle part that touches the needle packing screw and the lower part of the trigger that presses the air valve..Applying it to the nozzle cap 24:39 video is incorrect...The inside of the nozzle cap is where the compressed air passes, so you need to apply a sealant to help seal it...ㅜㅜ:

@JenesisDesignsandModelcraft

Жыл бұрын

I'd argue with 'incorrect' as being a bit harsh. I put it there only to make the threads feel nicer, and all of my new Iwatas came with those areas lubed. I'd say if it's leaking from there you have bigger problems - I did have a really cheap Chinese airbrush once that did, the machining quality was just awful. I threw that one away.

Another great video 👍✌️💜 Looks a nice airbrush. The H&S type nozzle/needle set up must be a boon. I've the Sparmax version, GP50 and a Sparmax Flyer (a hoot) both will spray solvent based products too. I have issues with my hands now, still trying to battle on with standard dual action brushes, but I've gone back to my Paasches. My H for base and primer coats, and Millennium for general purpose work, both cost effective, relatively easy to clean, easier to handle too, robust. I have to say that my GP50 is slightly trickier to clean (side cup and tube etc), but easier to use on larger models, as is the Flyer and Paasche H. I hope that helps anyone with health/hand challenges too🤞👍✌️😊

Nice video Jen how is the mini craft truck or as you call it lorry going

@JenesisDesignsandModelcraft

Жыл бұрын

It's going well John, I knew I was never going to get it done during May alone to be fair

@j0hndunphy300

Жыл бұрын

@@JenesisDesignsandModelcraft I just picked up the tamiya p38 j that should be a fun build also been a fan of Richard bong

This has saved my ass and my wallet! 🫶🏻