Quick Basic Tutorial using The Cinch by We R Memory Keepers
The Cinch
Жүктеу.....
Пікірлер: 37
@sharons47002 ай бұрын
Thank you so much. I haven't used my Cinch in a while and this really helped. Great job!
@12lesflo2 жыл бұрын
Thanks for making me feel a lil more brave. Was scared of this cinch machine but you made it feel more doable. Yay.
@cricutologist328204 жыл бұрын
Thank you! Best cinch tutorial out there!!!!
@paullangton-rogers23904 жыл бұрын
For anyone in UK or Europe watching this, wondering how the heck you do A5 and A4 punching on this machine (which is really designed for the American market that uses imperial measurements, although the latest model has both metric and imperial rulers)..here's how I figured it out (by trial and error): A5 (landscape format / short edge): Make sure the paper is aligned to FIRST LINE on the first (upper) rule guide, which is 1/17th of an inch. So in other words, you're moving the paper to the right by 1/17th of an inch which will give you perfectly centered holes on the short edge of A5 paper. You need to pull out button/plug 12 as that hole is not needed. I haven't tried doing A5 portrait mode yet, but if you look at the A4 method below, it should be exactly the same except you're obviously only punching once on A5 paper which is exactly half the width of A4. A4 (portrait format / long edge): Pull the ruler slide outwards 2 clicks to the left. On the newer models that have the metric ruler to the bottom, you'll see that 17cm at the top should line up perfectly with 32cm on the bottom from 2 clicks. Pull out plug 11 (marked A4 on newer models) as that hole is not needed. The paper will only be punched half way across due to the width limit of the machine. Turn the paper around (non-punched side facing right obviously), and punch. You now have perfectly centered holes on A4 paper. Tip: Use the little button to the left hand side to secure your paper before punching. Practice makes perfect. Practice on scrap paper. Because the A5 method requires a bit of precision aligning to 1/17th of an inch line (although its not difficult with a few practice attempts), it's recommended to punch your front and back covers WITH some paper at same time, so it looks neat and the holes align perfectly when it's wire bound. Hope that helps someone!
@carolemorrison98706 жыл бұрын
You've made me a happy gal!!! After searching and searching, and a whole lot of frustration on my part, I found your wonderful tutorial (Yay!!) and now have a clearer understanding of how to punch the desired holes in my project!!! Thanks so very much!! I'm so grateful!!! Carole from Chicago
@SherryWolfe10 жыл бұрын
I just got my cinch and was freaking out because I decided to cut the inside pages a little smaller than the outside cover and I just couldn't figure out how to make it all line up. After you showed how to leave some punches off of the end, I think I know what I'm doing now. Thanks so much. God Bless, Sherry
@katelynnglydewell408 Жыл бұрын
This helped so much. Thank you ❤
@shellyburke1501 Жыл бұрын
Late to the party but thankfull I found your tutorial
@TheTink192712 жыл бұрын
Thanks so much for the clear, concise tutorial! I have a bind-it-all and have been considering the Cinch - thanks to your easy instructions, I can see that this machine is lots more flexible than my bind-it-all. And thanks for making the little mistake (I'm sure you did that on purpose) so I can easily see how to fix a little error! You have an excellent teaching style!
@angelinetomek51425 жыл бұрын
Thank you this is the best tutorial for this. You rock!😘
@mariediaz74222 жыл бұрын
Great tutorial!
@JenuineCrafts12 жыл бұрын
That looks so easy to use. I should have bought the Cinch! I love how you can customize the holes!
@andrsn4u45510 жыл бұрын
Wow great tutorial. I have this machine haven't used it now it's time to play. Thank you
@sarahnathan37304 жыл бұрын
Thank you!!! Exactly what I was trying to figure out...
@2tinytreasures12 жыл бұрын
@kitty3640 2 differences that I know off hand really fast...the bind it all has smaller rectangle cuts instead of circles for holes. second, the bind it all seems to have a more effective way of binding the rings in a perfect circle...the cinch takes a little tweaking :) I'm actually still thinking about getting the bind it all, too. The Cinch will be easy for my kids to use...they've used it for school projects, but I want the rectangular cut holes for some mini's
@barbra4295 жыл бұрын
Excellent Tutorial! you are such a great teacher.
@2tinytreasures
5 жыл бұрын
Thank you...hope it helps you out with your cinch!
@TheGrammastamps6 жыл бұрын
Excellent tutorial
@carolcalheiros004 жыл бұрын
Thank You, so much!!! I was trying to do the same way the braziliens girls, and I mess up... You explain the exactly I need!
@pfengwa4410 жыл бұрын
Thanks! I was planning to punch my own holes but wasn't sure of the best way to achieve centering and evenness of the holes or whether the wires of the O Rings were pliable enough to be manipulated by hand. You solved the mystery!
@2tinytreasures12 жыл бұрын
@jud2171 thank you hope it's clear enough :) very basic one so much more you can do with this tool
@2tinytreasures12 жыл бұрын
@thekatsmeow1969 It took me a bit to get used to it...I still mess up from time to time, but can usually get a good circle...I still think I'd like to get the zutter one from Tuesday morning or something too
@5a55yfish11 жыл бұрын
Why wouldn't they just make a hole puncher that handles 8 1/2 X 11? Seems terribly inefficient if you're making several books, and you have to stop and do all these calculations just to punch some holes. The name "The Cinch" is kind of misleading...because it's not a cinch, it's complicated and awkward. They make machines that handle larger sheets, and also will do the binding for you, and you don't have to stop mid-job and fudge anything.
@segagirladventurespico5 жыл бұрын
Nice! Thank u for sharing! I bought a vintage journal on etsy with a hard cover and vintage book sheets and lots white paper. I thot maybe i can make these to myself!! They use coil or memory coil i think its called... how would i make holes on a hard cover vintage book? Thank you
@dabratmoni7 күн бұрын
How can I get a user manual for my cinch please
@barbra4295 жыл бұрын
Did you ever make the tutorial on how you used the wire and bound your project?
@mabelchiqui34488 жыл бұрын
gracias .. pensé que the cinch no sirvia para A4 ... pero veo que si sirve para encuadernar en tamaño A4 ...
@2tinytreasures12 жыл бұрын
@JustDahling haha and I want the bind it all!
@barbra4297 жыл бұрын
Can someone please tell me, what is the newest version of the Cinch, when I do a search I see yellow ones, pink ones, blue ones, and black and white ones....I went to the we r memory keepers website and typed Cinch binding machine in the search box and all that came up was accessories for the machine and not the machine itself. I looked on the Michaels site and couldn't find one, is this a discontinued item? Just to let you know, I am asking this question on other KZread sites in hopes of someone answering me. Thanks
@2tinytreasures12 жыл бұрын
@KimScrapper they get better and better
@countybunkin65917 жыл бұрын
Can you please explain how to use the Cinch if your page has a fraction, for example what if it's 7 3/4 height? I couldn't find any suggestions in the manual, and only one video. Please help if you can. Thanks
@2tinytreasures12 жыл бұрын
@lovethatcat2 tfw!
@barbra4297 жыл бұрын
Can someone please tell me, what is the newest version of the Cinch, when I do a search I see yellow ones, pink ones, blue ones, and black and white ones....I went to the we r memory keepers website and typed Cinch binding machine in the search box and all that came up was accessories for the machine and not the machine itself. I looked on the Michaels site and couldn't find one, is this a discontinued item? Just to let you know, I am asking this question on other KZread sites in hopes of someone answering me. Thanks
@Artmuse2011
6 жыл бұрын
Barbra the newest version is the Black and White Heidi Swapp branded Cinch. It punches square holes.
@2tinytreasures
6 жыл бұрын
And I think the newer one by we r memory keepers is blue teal and black
Пікірлер: 37
Thank you so much. I haven't used my Cinch in a while and this really helped. Great job!
Thanks for making me feel a lil more brave. Was scared of this cinch machine but you made it feel more doable. Yay.
Thank you! Best cinch tutorial out there!!!!
For anyone in UK or Europe watching this, wondering how the heck you do A5 and A4 punching on this machine (which is really designed for the American market that uses imperial measurements, although the latest model has both metric and imperial rulers)..here's how I figured it out (by trial and error): A5 (landscape format / short edge): Make sure the paper is aligned to FIRST LINE on the first (upper) rule guide, which is 1/17th of an inch. So in other words, you're moving the paper to the right by 1/17th of an inch which will give you perfectly centered holes on the short edge of A5 paper. You need to pull out button/plug 12 as that hole is not needed. I haven't tried doing A5 portrait mode yet, but if you look at the A4 method below, it should be exactly the same except you're obviously only punching once on A5 paper which is exactly half the width of A4. A4 (portrait format / long edge): Pull the ruler slide outwards 2 clicks to the left. On the newer models that have the metric ruler to the bottom, you'll see that 17cm at the top should line up perfectly with 32cm on the bottom from 2 clicks. Pull out plug 11 (marked A4 on newer models) as that hole is not needed. The paper will only be punched half way across due to the width limit of the machine. Turn the paper around (non-punched side facing right obviously), and punch. You now have perfectly centered holes on A4 paper. Tip: Use the little button to the left hand side to secure your paper before punching. Practice makes perfect. Practice on scrap paper. Because the A5 method requires a bit of precision aligning to 1/17th of an inch line (although its not difficult with a few practice attempts), it's recommended to punch your front and back covers WITH some paper at same time, so it looks neat and the holes align perfectly when it's wire bound. Hope that helps someone!
You've made me a happy gal!!! After searching and searching, and a whole lot of frustration on my part, I found your wonderful tutorial (Yay!!) and now have a clearer understanding of how to punch the desired holes in my project!!! Thanks so very much!! I'm so grateful!!! Carole from Chicago
I just got my cinch and was freaking out because I decided to cut the inside pages a little smaller than the outside cover and I just couldn't figure out how to make it all line up. After you showed how to leave some punches off of the end, I think I know what I'm doing now. Thanks so much. God Bless, Sherry
This helped so much. Thank you ❤
Late to the party but thankfull I found your tutorial
Thanks so much for the clear, concise tutorial! I have a bind-it-all and have been considering the Cinch - thanks to your easy instructions, I can see that this machine is lots more flexible than my bind-it-all. And thanks for making the little mistake (I'm sure you did that on purpose) so I can easily see how to fix a little error! You have an excellent teaching style!
Thank you this is the best tutorial for this. You rock!😘
Great tutorial!
That looks so easy to use. I should have bought the Cinch! I love how you can customize the holes!
Wow great tutorial. I have this machine haven't used it now it's time to play. Thank you
Thank you!!! Exactly what I was trying to figure out...
@kitty3640 2 differences that I know off hand really fast...the bind it all has smaller rectangle cuts instead of circles for holes. second, the bind it all seems to have a more effective way of binding the rings in a perfect circle...the cinch takes a little tweaking :) I'm actually still thinking about getting the bind it all, too. The Cinch will be easy for my kids to use...they've used it for school projects, but I want the rectangular cut holes for some mini's
Excellent Tutorial! you are such a great teacher.
@2tinytreasures
5 жыл бұрын
Thank you...hope it helps you out with your cinch!
Excellent tutorial
Thank You, so much!!! I was trying to do the same way the braziliens girls, and I mess up... You explain the exactly I need!
Thanks! I was planning to punch my own holes but wasn't sure of the best way to achieve centering and evenness of the holes or whether the wires of the O Rings were pliable enough to be manipulated by hand. You solved the mystery!
@jud2171 thank you hope it's clear enough :) very basic one so much more you can do with this tool
@thekatsmeow1969 It took me a bit to get used to it...I still mess up from time to time, but can usually get a good circle...I still think I'd like to get the zutter one from Tuesday morning or something too
Why wouldn't they just make a hole puncher that handles 8 1/2 X 11? Seems terribly inefficient if you're making several books, and you have to stop and do all these calculations just to punch some holes. The name "The Cinch" is kind of misleading...because it's not a cinch, it's complicated and awkward. They make machines that handle larger sheets, and also will do the binding for you, and you don't have to stop mid-job and fudge anything.
Nice! Thank u for sharing! I bought a vintage journal on etsy with a hard cover and vintage book sheets and lots white paper. I thot maybe i can make these to myself!! They use coil or memory coil i think its called... how would i make holes on a hard cover vintage book? Thank you
How can I get a user manual for my cinch please
Did you ever make the tutorial on how you used the wire and bound your project?
gracias .. pensé que the cinch no sirvia para A4 ... pero veo que si sirve para encuadernar en tamaño A4 ...
@JustDahling haha and I want the bind it all!
Can someone please tell me, what is the newest version of the Cinch, when I do a search I see yellow ones, pink ones, blue ones, and black and white ones....I went to the we r memory keepers website and typed Cinch binding machine in the search box and all that came up was accessories for the machine and not the machine itself. I looked on the Michaels site and couldn't find one, is this a discontinued item? Just to let you know, I am asking this question on other KZread sites in hopes of someone answering me. Thanks
@KimScrapper they get better and better
Can you please explain how to use the Cinch if your page has a fraction, for example what if it's 7 3/4 height? I couldn't find any suggestions in the manual, and only one video. Please help if you can. Thanks
@lovethatcat2 tfw!
Can someone please tell me, what is the newest version of the Cinch, when I do a search I see yellow ones, pink ones, blue ones, and black and white ones....I went to the we r memory keepers website and typed Cinch binding machine in the search box and all that came up was accessories for the machine and not the machine itself. I looked on the Michaels site and couldn't find one, is this a discontinued item? Just to let you know, I am asking this question on other KZread sites in hopes of someone answering me. Thanks
@Artmuse2011
6 жыл бұрын
Barbra the newest version is the Black and White Heidi Swapp branded Cinch. It punches square holes.
@2tinytreasures
6 жыл бұрын
And I think the newer one by we r memory keepers is blue teal and black
@barbra429
5 жыл бұрын
@@Artmuse2011 Thank You
@barbra429
5 жыл бұрын
@@Artmuse2011 Thank You