Puma on the Prowl: Sd.Kfz 234/2 Puma Dragon Model
Welcome AFV fans.
Join me on a tour of the 1/35 scale model Sd.Kfz 234/2 Puma. This iconic German recon vehicle of WW2.
The 'Puma' Sd.Kfz.234/2 was undoubtedly the best armoured car of WW2; well protected for its role as a recon vehicle, highly mobile and heavily armed, but its late introduction into service when the tides of war had swung against Germany, and the modest production totals of all variants ensured that this magnificent fighting vehicle never really fulfilled its conceptual promise.
Fitted with the superb 50 mm L/60 cannon, it was hard to stop a crew engaging in combat, rather than scouting.
The vehicle had 2 driving positions, one front and one rear facing, as it had the same speed and manoeuvrability in reverse as it did forward.
Fitted with 8 independently powered and steered wheels it sported 'bulletproof tyres' and a 1st for smoke dischargers
An very advance design that was years ahead of its time it was studied by the allies after the war and many of its features were adopted in their future designs.
The Kit from Dragon was a real pleasure to build.
It has a few slight flaws with fit and instructions (like at least 5 times it was telling the left went on the right and visa versa (Typical Dragon, you always need to see for yourself before committing to what the instructions tell you).
One thing it should win hands down is the detail ( I can actually see a raised impression of a keyhole on the side pannier padlocks.)
The engine vents are nice and thin to scale, the wheels are incredible.
I could go on the list is endless.
Anyway I hope you all enjoy watching 👍
Пікірлер: 40
That kit looks Like it was a lot of fun to build.Dragon always put a ton of parts,and there is always that one mistake that goes through the whole instruction which you have to deal with,happened with a Dragon Panzer iii where both sides where mixed up.Thanks for sharing mate!
@afv-studio
2 ай бұрын
Thanks KG, It was fun, I seem to like these specialised vehicles. Give me something like this or a converted 38t chassis over a Tiger any day 😆
Awesome
@afv-studio
2 ай бұрын
Thanks 👍
Achievement unlocked: successfully navigating the minefield instructions.😁 Very good build, Sir.
@afv-studio
2 ай бұрын
🤣 Very good. Thanks for the comment.
Great work mate. I started to build the same kit years ago but never got around to finishing it off due to work, but I loved it. Now I’m retired it’s just another project I have to get around to finishing it off. It’s going to be interesting to see how Miniart and RFM’s new Sd.Kfz.234/2 kits are in comparison to Dragon’s old 2006 kit. I would imagine that the RFM kit will run circles around the rest. Thanks for sharing another great build video! ❤😊
@afv-studio
2 ай бұрын
Thanks Mike, Yes 20 years on and I'm sure RFM will give Dragon a run for the money. Dragon have in fairness done a few upgrades on this kit over the years. The inclusion of The brass smoke dischargers and width indicators and the steel hydraulic brake lines are a nice touch. But I'm sure RFM will probably win on the mouldings. Thanks for watching, Always appreciate your comments 🫡
I love the background 1970s funk progressive instrumental jams I'm down with it playing while you build this well rendered Chinese production model Puma armored recon vehicle, I'm digging both 😂 groovy man😝🤪
@afv-studio
2 ай бұрын
Thanks Brock. Its nice to know that all those extra hours I put into production, choosing suitable music and editing, are not wasted. I also felt it a good fit for the build. There will defiantly be more of those funky grooves in future. 🕺🕺 🤣
I'm excited about the upcoming RFM release. Looking forward to reviews/builds.
@afv-studio
2 ай бұрын
I would like to see it too 👍
Great work! Congratulations!
@afv-studio
2 ай бұрын
Thanks Peterson 👍
beau montage
@afv-studio
2 ай бұрын
Merci beaucoup 👍👍
Awesome work. Looks great!
@afv-studio
2 ай бұрын
Thanks Scott 👍
Nice work sir. I messed up my suspension, broke the connecting arm for the front wheels and made other crucial errors that forced me to glue evrything in place. And I see you got the brake lines installed. I couldn't for the life of me figure out how they fit! I wish I'd seen this video before building mine. My compliments sir!
@afv-studio
2 ай бұрын
Thank you Jim. I feel your pain 😓 I also struggled with the brake lines... Why oh why do them in steel? They don't quite fit and are a pain to bend and cut to the correct size. My apology with not showing the installation. In truth I could not deal with the filming while messing around with these, so no footage . The Right and Left mix-up throughout the instructions doesn't help with the build either. Caution for any building Dragon.....Make sure your happy before applying glue. Thanks for the compliment 👍
@jimaltergott9326
2 ай бұрын
@@afv-studio Thanks for your reply. Dragon definitely didn't help with the vague drawings regarding the brake line installation. MiniArt is releasing a Puma this year, I may just buy that kit!
@afv-studio
2 ай бұрын
Someone commented that RFM has1 too. Worth looking into.@@jimaltergott9326
@jimaltergott9326
2 ай бұрын
@@afv-studio Thanks, I will look for that
Looks a tough build but looks amazing finished 👏
@afv-studio
2 ай бұрын
Thanks Colin. will look great once painted, hope you check it out when published 👍
We are under a PUMA attack. Rye Field has announced a new one, then Mini Art with full interior and engine and now Dragon is re-releasing theirs with some new goodies I believe.
@afv-studio
2 ай бұрын
This is the November 2023 upgrade. The new wheels were added. Have a feeling this was there answer to the RFM and Mini Art announcement. I Also picked up the Sd.Kfz. 234/4 Panzerspähwagen which is still waiting to ship to me.
I saw Andy's HHQ review of the RFM Puma. Not bad, an alternative to the full interior upcoming MiniArt kit. My order from Cyber-Hobby is on the way. Gave into impulse and ordered the Dragon Afika Tiger I & the British Sexton.
@afv-studio
Ай бұрын
I watched that as well Jim. Did you not go for that great looking USMC Sherman in the end?
@jimaltergott9326
Ай бұрын
@@afv-studio I did. But could only find the Tarawa 1943 version that Martin Kovac recently built
@jimaltergott9326
Ай бұрын
One question if I may. From the time you got your confirmation of shipment email, how long did it take to receive your order from Cyber Hobby?
@afv-studio
Ай бұрын
@@jimaltergott9326 The ''Free shipment'' is very slow. To get here in UK it takes 2 months at least. You can log on and track the shipment so at least you know its on its way Once it leaves china it will go quite until it arrives in your country
@jimaltergott9326
Ай бұрын
@@afv-studio Ok, thanks. My order shipped this week, been following it via tracking number. My hunch is customs will take the longest to get through.
Cool model.
@afv-studio
2 ай бұрын
Thanks 👍
Great built! What glue do you use to attach the photo etched parts to the plastic or between them?
@afv-studio
2 ай бұрын
Hi Kiri. Thanks and a good question... For any metal you should use CA/Superglue. There are a few different CA glues and all have their uses... 1. Standard CA/Superglue flows like water and dries fast on contact (like 2 seconds fast) This can be messy but is suitable sometimes. 2. Flexy 5K CA glue from VMS is a thicker Superglue that is black in colour. It's much more controllable and can take a minute or 2 to set on contact depending on how much you apply. (this would be my recommendation for most things) 3. CA/Superglue Gel is really thick and will dry in like 5-10 seconds on contact . I used this when attaching the stowage rack to the Puma hull so i wouldn't need to hold it in place for too long. Also worthwhile is a CA glue remover (VMS do one) it will allow you to clean up any glue that squeezes out around the edges. Use an old paintbrush and use as soon as possible for easy removal of excess glue. The part should stay in place as soon as it holds and the remover shouldn't make it fall off. If you watch my Panther Build Video you can see it all in action.
@KiriG68
2 ай бұрын
@@afv-studioThank you!
Where did you get the figures from, was there a place to buy them or are they custom?
@afv-studio
19 күн бұрын
You can get them from Panzer Art FI35-127 Voran using the optional heads and addition of radio headset for commander.