Great vid Paul, love the channel 👍🏻

@AndrewPaul

7 жыл бұрын

Cheers mate.

Love you're work man nice and clean 👍🏻.

@AndrewPaul

7 жыл бұрын

Many thanks mate :-)

Your work is beautiful. Also many spots on your green working sheet shows beautiful pattern and looks like an art. I think you can sell that sheet on auction and I would buy! In any case, hope you post more and educate us with your knowledge!

Great Vid Paul.... and happy new year

@AndrewPaul

7 жыл бұрын

Cheers mate and all the best for 2017 :-)

Nice video. I'd love to see a tour of your work layout to see how you have things setup

Happy new Year and nice Vid. like mostly :)

@AndrewPaul

7 жыл бұрын

Cheers mate. All the best for 2017 to you too :-)

@alexmarco5309

7 жыл бұрын

Q

@bruhbruh9940

6 жыл бұрын

It's 2018 lol how fast

u'r a genius guy that was a work of art wow

@AndrewPaul

7 жыл бұрын

Many thanks.

Love your vids as always man. What was that pen you used on the Link wires?

@AndrewPaul

6 жыл бұрын

It's conformal coating (aka. PCB Overcoat) - this particular pen is made by MG Chemicals (Part no. 419D-P).

Good afternoon Andrew Paul I have seen many tutorial videos and yours are amazing because you have a way to explain and above all verify all your work I like how you do your repairs on PS4 consoles, but I would also like to know if you have tutorials on repairs of PS3 in I specify the RSX GPU chip because in my console I was suddenly set to a resolution of 1080p and now I only get one of 1080i I would like to know what is the reason why I can not visualize at 1080p resolution and tried everything to change cables, format, reset configuration to the factory of the PS3 change TV change the inputs in which I connect and watched tutorials that changing the thermal paste of the RSX or making a Reflow can be fixed but what I need to know is because if I was working well my PS3 I can not I can see 1080p the image and only 1080i that maybe the HDMI port I do not think because it does not have any false contact besides that I take care of my device never let it get dirty with dust, forgive this letter but I would like to know your opinion about it and what would be the possible cause and repair, greetings from Mexico and continue with those tutorial videos so good that you do in quality and especially in technical information.

Hi Andrew. I was wondering if it's not too much trouble if you could help. I have a board with the diode you did a link wire to in this video and the resistor underneath it missing. I need to know which way round the diode goes and what the value of the resistor is. I don't have another board to look at and I can't find a close up pic anywhere. Any help would be much appreciated thank-you

Hey Andrew, nice work as always! One question...What Gauge wire are you using here?

@AndrewPaul

7 жыл бұрын

36 gauge here mate.

Good job!

@AndrewPaul

2 жыл бұрын

Thanks! :)

Hello mate is there a possibility that I could get some help? I'm having some problems with my ps4, I basically stripped it down to the mother board to take a look at the HDMI and I've put it back together and it won't turn back on? I'm guessing I've fried the motherboard but I just thought I'd get your opinion?

@AndrewPaul

7 жыл бұрын

Check the ribbon from the PSU is plugged into the motherboard socket and the two +12v pins are straight beneath the supply. If they're in place then It's possible that the power button tab has gotten lodged in the lid. Remove the upper lid and press the brass metal plate behind where the power button would normally be with power applied. Does it turn on?

@MiquelEddie

7 жыл бұрын

Andrew Paul okay I will have another go later on thank you so kicu

Hi Andrew, the issue I have is that there is no power going to my my PS4 original , I've checked the power supply with another working one and all the connections and looked around the motherboard SAA-001 and cannot find anything missing or burnt , do you have a diagram or schematics of where the important parts are or a video I can watch.

very good work once again andrew!! just a quick question what type of microscope are you using for these repairs? make, model, zoom, price range etc. thanks

@AndrewPaul

7 жыл бұрын

Many thanks. Scope is an Amscope SM-4TPZFRL. It comes with a 3MP USB camera however I have since upgraded to a HDMI camera as an aftermarket upgrade which can be seen in this video - the capture device it's plugged into and KZread encoding doesn't do the image quality justice sadly. Price to the UK by the time shipping and customs charges are accounted for were just over £850 and would probably be pushing past that now to approx £1k with the GBP to USD exchange rate being as weak as it is.

@rickii2010

7 жыл бұрын

thanks andrew

Also, where do you source your HDMI port replacements?

Final question.On a day to day basis doing multiple HDMI port replacements, do you make use of the AmScope when soldering all the smaller pins to the mainboard? This is another frustration at work for me because we do not have any bench scope and instead have the magnifiers in the link below. They're fixed magnification (I think a measly 1.75x), and do not leave enough work space between the magnifier and the item you're trying to solder. Would you say the pin pitch of those HDMI pins warrants a decent scope when doing up to 4 HDMI jobs a day? goo.gl/NlvIUH

Hi Andrew, where do you get genuine Amtech flux from in the UK?

Amazing at his job fare play to Andrew top man :)

Holy flux residue! Was the previous repair tech allergic to IPA or something? A 2 minute clean with IPA and a brush was all that was needed :)

@AndrewPaul

7 жыл бұрын

Just what I thought ha ha! :-)

hey mate just wondering something when i change my hdmi output from say output 1 wer the sky box is and back to ps4 output my screen has a green tint off it if i plug it into a difrent tv i get no sound try another tv it flashes could this be the encoder chip? a tech place told me it could be any help would be realy apreciated thanks 😊😊

Hello Paul i this video i see you don't solder the ground pin to the ps4 i have a ps4 that am working on that all the pad's is missing my question is you no they are five ground pin am i going to solder all to the HDMI port or can i just solder one or nor like you do in this video thank you.

good job bro

@AndrewPaul

7 жыл бұрын

Cheers mate.

Excelente!! Hello Andrew! what is that green that you cover the copper wires? (sorry my english!!)

@AndrewPaul

6 жыл бұрын

It's conformal coating. Some pens are called PCB Overcoat pens. The one I use is made by MG Chemicals and I highly recommend it.

@diegocudde3415

6 жыл бұрын

Andrew Paul thank you!!

What kind of wire do you use to repair traces like these?

How much would this cost if I sent it to you to fix? It’s a newer model and I’m having the same problem. There’s no output and there’s a white light of death. My brother pushed up the PlayStation against the wall and I believe the pins in the port broke (although I’m not too sure).

hi pau how many degrees you put the air gun to remove the port hdmi many thanks

Hello engi andrew My ps4 fat version has problem The pins of the hdmi have short circuit caused by soldering pins together and now my blue light of the ps4 does not work only i can hear sound of beeb when i press rejection disc button could you tell me please what are the possible problem please kind regards

What was that pen you were using with the enamel coating? Link a link for purchase?

@AndrewPaul

7 жыл бұрын

www.amazon.co.uk/gp/aw/d/B0111O7AJM/ref=dp_ob_neva_mobile

How much do you spend on consumables, Andy? Do you think going down the retro repair and restoration is worth it too? I mean retro seems much easier to repair with the right equipment. There's a lot of collectors out there and it's nice to restore something to its former glory, but is there much money in it, we all have bills to pay. Or should I go down Apple laptops or phones in general to make the cash. I'm so undecided.

Hi Andrew Thank you again for your answers, have you EMI filters to sell has any chance? cordially

@AndrewPaul

7 жыл бұрын

Where are you located and how many do you need?

Hi I have a ps vita the charge socket has been damaged what old the price be to swop over the charge port I believe they are soldered on and don't think my work is up to that finer job regards mark

Hi mate, thank god someone on here actually knows what they're doing! Someone's had a go at fixing my hdmi but although the soldering looks ok(ish) it still doesn't work. Looks like the resistor to the right (2k I think, next to the pin 18 diode) is either bathed in solder or missing, and there's a scratch across all the traces coming from the hdmi socket, do you reckon I'll need to wire every pin to alternate points on the board or is there an easier way. Also, how vital is said resistor?

@AndrewPaul

7 жыл бұрын

Correct mate it's a 2k-ohm resistor and it is indeed needed so if it's missing it'll need replacing. Check continuity of the traces which have been scored across from the pin on the port to the given location on the pin-out videos I have listed on the channel to ensure they aren't broken. If they are then you'll need to run a link wire to restore the connections, or if it's a small knick then you may be able to fill the trace with a conductive pen. If they read continuity OK then you should be fine to leave them as they are. You'd also be well advised to check each of those scored pins for continuity to ground as well as to their neighbouring pins to ensure all is good and you don't have any grounded lines or cross-interference.

@bobwatson6726

7 жыл бұрын

Cheers mate :)

Hi Andrew thank you for all these video that you have done they are constructive and I have repaired two ps4 (port hdmi) by following your videos and welding techniques. I will have however a question and what use the electronic components that are between the IC and the port hdmi I speak of the small black rectangles to the numbers of 4? They are connected to the hdmi port and the ic. Can you tell me how it's called and where to find it on the net. I hope you will read my message and answer me. Thank you and continues the videos is cool.

@AndrewPaul

7 жыл бұрын

Hi Pascal, These are EMI Filters and their purpose is to filter any noise or interference to the video signal. I'm not sure on a part number currently (I'm working on it) but they can be had from scrap PS4 or PS3 motherboards. You can wire straight across them but ideally they need replacing. I'll hopefully be sourcing and stocking these shortly in my online store which will be coming very soon!

Nice !

Those ground plates and the heatsink effect you mention are a problem for me at work, slowing me down and making the task a bit frustrating when you have 12 jobs a day to hit. The Soldering irons at work are Tenma stations from Farnell and they're 60 watts. I think they're just rebranded Atten models. Correct me if I'm wrong but isn't the wattage of a soldering station what determines the response time for power (and thereby heat) to be transferred from soldering iron tip to the surfaces being soldered. As such I'm finding 75 watts is likely the minimum for a soldering iron to provide good response times when working in areas that have somewhat large 'heat sink' effects. What do you think?

@AndrewPaul

7 жыл бұрын

Tenma? Ouch you have my sympathy. Yep, they're pretty much a re-branded cheap generic station along the lines of Aoyue, WEP, WIP etc. I think the type of iron is probably a more important factor than wattage. For example, a Jovy iS40 is a 50W iron - but as it's a cartridge type iron the heating element and thermal regulation is an incredibly efficient and optimal design as it gets heat directly to the tip and is measured right at source where you want it. Compare this to a sleeved type iron where the temperature is measured in the handle where the heat is produced. This leads to heat draw losses as it takes time for the losses at the end of the tip to reach where the temp is measured back in the handle. You also have issues where the heat is transferred to the tip solely by the tightness of the fit of the tip sleeve over the element. Definitely not ideal - particularly if you're doing a lot of machines at any one time. I couldn't go back to a standard iron now after the Jovy. I'd love a JBC but they're a bit out of my price range ha ha! :)

@bobfairfield2227

7 жыл бұрын

We always had aoyue, atten other cheaper brand soldering irons but have 2 JBC soldering stations now and I don't know how we lived without them before.

What dif you use for copper wire? Size?

Perfect👌👌👍

Was the wire that you used just a generic 34 AWG gauge ? or a specific one? great work though!

@AndrewPaul

7 жыл бұрын

Just generic 36AWG magnet wire. Many thanks :-)

We have a PS4 here that new HDMI port after pins were rammed in. Solder is all good. Replaced missing Diode and caps that got knocked off but still getting no image white light. Would this be the encoder chip? Could it have been shorted when the pins were pushed in?

@AndrewPaul

7 жыл бұрын

Absolutely yes. That'd be what I'd look at next if all else is good.

@ChrisLongPhoneRepair

7 жыл бұрын

any schematics or known voltages to check before going to the encoder?

@AndrewPaul

7 жыл бұрын

Other than comparing DMM values to a known working board, sadly not.

Hi Thank you for your answer! Are they essential for the operation of the console? I have a 1216-a motherboard whose EMI filters are hs, can I solder a copper wire bridge from the hdmi port and directly on the ic? These filters can not be found ??? thanks to you

@AndrewPaul

7 жыл бұрын

They need to be present ideally. At a pinch you can wire them from top contact to bottom contact to test but I'd always recommend replacing them.

Thanks, I have a question, is overcoat pen green a UV curable?

@AndrewPaul

6 жыл бұрын

Depends on the pen bud. The one I use dries of its own accord in air within a minute or so.

hey Andrew.. i'm wondering if you could clarify a couple of things for me.. i have a SAB-001 Motherboard. In this video you linked pin 18 to the diode, but in the other video, you showed that pin 18 should be linked to the resistor right below the diode. the other video that i'm referring to is the one where you overlay the pin locations at the end of the video.. Also, pin number 15 in the other video you pointed to the first diode to the right, but in this video, pin 15 is linked to the first resistor down.. Can you please help me with this one? Also, I noticed in this video, i noticed that you didn't link the ground pins. Is there a reason for that? thanks in advanced.

@AndrewPaul

7 жыл бұрын

Hi, Pin 18 can go to either the capacitor as per the pinout video, or the same side of the diode - whichever you prefer - I prefer the diode personally. Pin 15 - again as above those sides of the diode and resistor are common - those are simply my recommendations as to where each pin should go. As far as ground goes, there are 5 ground pins on the header - as long as at least one of the pins on the header is intact and can be soldered to then it should be fine to leave the others out if they are damaged. Hope that helps. :)

@bafurysutto8768

7 жыл бұрын

oh.. i see.. thank you for the fast reply and help.. one more question for you.. in that same overlay video.. for pin 11... is the left side of that diode ground?

@AndrewPaul

7 жыл бұрын

No problem - pin 11 is ground anyway so tie it to any ground location you like.

@bafurysutto8768

7 жыл бұрын

It's one of your videos titled.. PlayStation 4 SAA_SAB-001 motherboard HDMI Pin out (10xx_11xx Series.. Sorry I stepped away from computer

@bafurysutto8768

7 жыл бұрын

Andrew Paul Again.. Thank you for share your knowledge with the world.. Wish u lived in Orlando fl.. Lol

hello andrew, what's the green dough you use to cover the stp circuit

@edodv9949

4 жыл бұрын

A quote from Andrew's reply www.amazon.co.uk/MG-Chemicals-Green-Overcoat-Pen/dp/B0111O7AJM/ref=redir_mobile_desktop?_encoding=UTF8&ref_=dp_ob_neva_mobile

Andrew Paul, which conformal overcoat are u using?

@AndrewPaul

Жыл бұрын

It's an MG Chemicals 419D-P-GR pen. It can be had in various colours as well if you'd prefer👍

@charlierichardson1826

Жыл бұрын

@@AndrewPaul Thank you Andrew Paul. I'm watching one of your videos now. I truly appreciate all your sharing of Knowledge.

@AndrewPaul

Жыл бұрын

Glad to help:)

Hi Andrew, I messaged you a few about a week ago I think about sending my PS4 to you. But that wasn't an option because I live in the US. I'm having issues with the USB ports on my console and your video on it replacing the chip was helpful. I took my PlayStation to a store down the street and they can repair it but they need a new chip for the board. Do you know where I can get one. A link or anything would be helpful thank you!

@AndrewPaul

7 жыл бұрын

Look up a seller on somewhere like AliExpress, or lift one from a donor board with an unrelated issue.

@hunterfaddis3697

7 жыл бұрын

Andrew Paul thanks!

You mention in your video Magim wire , I have had a quick Google for the wire , but I am unsure if I have typed in the correct spelling for the wire...how is it spelt please and who makes it ?

@AndrewPaul

7 жыл бұрын

It's magnet wire - otherwise known as enamelled wire or transformer wire. There are many manufacturers of it - the stuff here is 36AWG - if you like a bit more room to maneuver then 38 is probably a good bet.

Hi I’m in the middle of this right now. How in the world did you solder the wire to the actually board. I’m working on pin 8. Thank you for the info also really nice job sir.

@AndrewPaul

6 жыл бұрын

This should help you bud: kzread.info/dash/bejne/Z4RrxKaseLnZhpc.html

Nice

@AndrewPaul

7 жыл бұрын

Cheers mate.

I’m doing my ps3 and the pins are a bitch to get out the four posts on the side of the hdmi socket and with regular old hakko soldering iron it makes it so difficult and I have a big heat gun not meant for micro soldering and stuff it’s so annoying

BRO GRATE WORK AS ALWAYS, TRY KEEP A BIT BEARD YOU GONNA LOOK MORE COOL...

@AndrewPaul

7 жыл бұрын

Cheers mate. I'm still not sure on it - the missus like it though ha ha!

I am from FRANCE and I would need 3 EMI filters are burned and the tracks that connects hdmi to EMI flasers have burned the console works blue to white light but in the state no picture. If you wish I can make a picture but how do you send it?

@AndrewPaul

7 жыл бұрын

Hi, yes I do. They're £1.50 each or 4 for £5. Postage to France is £1.99. If you want some, drop me a message at ytandrewpaul@outlook.com and we can arrange it. Many thanks, Andy.

what pen do you use to reveal the pads on motherboard?

@AndrewPaul

7 жыл бұрын

Any fibreglass pencil will do the trick nicely.

I have got PS4 and I've got some issue with hdmi port connector has been broken how much do you charge to fix I'm from Leicester

@AndrewPaul

3 жыл бұрын

Hi Safaraz, drop me an email to ytandrewpaul@outlook.com and I'll get a quote across to you. Many thanks.

The copper shim is used by many manufactures like Alienware Nvidia HP etc etc the GPU's seem to respond well i think it would only be a few degrees difference but in a laptop that is very needed good video thou Paul

@AndrewPaul

7 жыл бұрын

+fixingthingz4u The difference is those are designed to have that there - The tolerance of the heat sinks call for it. These are not and will warp board and or die if left and should never be installed on a PS4.

@gperryman0973

5 жыл бұрын

Actually I know of many PS4 repair technicians who will swear that the copper shim technique is over 70% more successful and long lasting than the reballing technique! Of course, all of the people who want to charge you £80 are the ones who swear by the reballing! What a coincidence!

Where can I buy that wire & what's the size of it? I tried going to your website but it's down. Any help.

@AndrewPaul

4 жыл бұрын

Hi, Drop me an email to ytandrewpaul@outlook.com with your location and quantity required.

@melannieworld

4 жыл бұрын

@@AndrewPaul , I will.

I need some help...my 2ds doesnt power on or charge...does anyone know whats wrong with it?

Is it ok to have those jumper wires over traces like that?

@AndrewPaul

6 жыл бұрын

Yes there's no issues doing that.

what gauge of cooper wire do you use???

@AndrewPaul

7 жыл бұрын

36AWG here - 38 would be better if you've got a lot of fine stuff to do.

One question.What is most possible problem with ps3 hdmi.On scart works,hdmi detected,no image on hdmi,conection betwin cable and port is ok.Is it possible that hdmi chip failure or that is un common reason or what is most possible thing (rails from port to transistors or chip it self thank you Yes and what to do?

@AndrewPaul

2 жыл бұрын

What model PS3 is it?

@gospodingaspar3042

2 жыл бұрын

@@AndrewPaul cechl04 fat model

Is there any schematics for the ps4, or is it just wing it and learn ?.

@AndrewPaul

7 жыл бұрын

No schematics - it's just a case of experience and knowing a few basic general electronics troubleshooting methods to get by.

+Andrew Paul I am novice to soldering, and I did 2 ps4 hdmi replacement, one looked very good and worked perfectly after I changed the hdmi port,but the second was dropped in the floor and I think id damaged the board because there were 2 or 3 missing pads on the board and the hdmi connector was bent a lot, I tried to do just as you did in your video, but I don't skills anywhere near to yours, after I finished it and ran the link the wires to the board, the ps4 is turning on and shows image in the tv, but the image is not very clear, it shows some noise in the image, I dont know if the link wire I used was too thin or if I haven't done a good job in linking them, do you have a suggestion on what could be the problem? I used link wire of 0.10mm from this link www.ebay.com/itm/252962939163

@AndrewPaul

6 жыл бұрын

It's likely to be that the wire isn't sufficiently soldered to the port - a dry joint or unsecure joint. Redo the connections to the rear of the port and give the wire a quick tug with a tweezer - if it stays in place you should be fine. Check the joint on the other end of the wire also.

@fmbar00

6 жыл бұрын

thank you very much! I will try that then :D

@fmbar00

6 жыл бұрын

now it is fixed, I had to re-do some points and now it working just fine, thank you!! :D

Buen trabajo pero tienes el pulso como para ir a robar panderetas estas navidades... jajajjaajajaja

Really can't thank you enough and yes the kitten is not allowed in my room any more

@AndrewPaul

7 жыл бұрын

No problem at all mate :-)

how much do you charge for this kind of issue.

@AndrewPaul

7 жыл бұрын

My repair services can be found here: www.ebay.co.uk/usr/lufcfan2004 Cheers.

can the wire lay on top of each other and be touching ? :)

@B9NE

3 жыл бұрын

No he said that in the video. You don't want signal interference to cause white spots or any other artifacts on the screen lol I know this is two years old.

What type of cable are you using?

@AndrewPaul

7 жыл бұрын

36AWG magnet (enamelled) wire. 38AWG would also be a very good choice.

@javierarzaga8485

7 жыл бұрын

Thanks man!

I just wish, Andrew, that you could prosecute, or cause the court, (but her majesties court is a joke here in Murica, after Jeffery Marson's decision on Tommy), to prosecute these repair shops. If the same guy who did this is still there, which might be difficult.

Life would be easier with a smaller gauge jumper wire.......great video though :)

Would I be able to send you my ps4?

Hello Andrew I replied in MP thank you to consult your emails. Thank you

this kind of fixing aint easy just like the apu you have to know what your doing you gotta be smart but good work

@AndrewPaul

7 жыл бұрын

Many thanks. :-)

Hey I have a PS4 that has the same problem would you mind repairing it

@AndrewPaul

6 жыл бұрын

Hi, Where are you located?

@quincyfields4397

6 жыл бұрын

I'm in New York and you?

@quincyfields4397

6 жыл бұрын

The system turns on just no image with hdmi port took it to a store they said something about the motherboard where the hdmi goes being messed up

Hi Mate, What scope is it that you have? thanks

@AndrewPaul

7 жыл бұрын

Hi, it's an Amscope SM-4TPZFRL. The HDMI camera is an aftermarket upgrade - the capture device it's plugged into and KZread encoding doesn't do the image quality justice sadly.

@mike185bmx

7 жыл бұрын

Wow thats pricey! thanks for the info

@AndrewPaul

7 жыл бұрын

Pricey but you'll wonder how you ever lived without it :)

@mike185bmx

7 жыл бұрын

I have just started fixing ps4s ect for a bit of fun, couldn't have done any of it without your great vids! so thanks for that. The problem i have is i cant see the small stuff very easily close up, ive tried an eBay special USB microscope but it has to be touching what your looking at which is no good. need something i can solder under whilst viewing on a screen but have a budget of £100 max........ any ideas? cheers mate

@AndrewPaul

7 жыл бұрын

No problem mate - good luck with the repairs. Maybe try something like item number A29FF at maplin.co.uk - not a bad price either :)

Can anybody tell me what liquid he is using to clean up the board, that is the name of the stuff, thanks :)

@AndrewPaul

6 жыл бұрын

+The Lords Table With Vincent & Wife Bonnie It's Isopropyl Alcohol (IPA).

i have a similar problem would you plaes repair it i preordered fifa 18 and i cant play im soo jealous of ppl playing

@frenzysplash9405

6 жыл бұрын

im in london

@frenzysplash9405

6 жыл бұрын

sound works but no image

@frenzysplash9405

6 жыл бұрын

im 13

@AndrewPaul

6 жыл бұрын

Drop me an email at ytandrewpaul@outlook.com and I can send you some details / price quotes etc. Many thanks.

So it was a white PS4 an you finish with a black one ???

@AndrewPaul

7 жыл бұрын

At the end during testing the case isn't installed on this PS4 - the mid-frame is visible at the end which is black even on the white consoles and this is what you can see. I can only presume you're a new viewer who hasn't seen much of my content - I never ever show you anything which doesn't work afterwards. As I always say, if I ever tell or show you how to do something and it doesn't work afterwards then you shouldn't listen to me. There are too many cowboys in our field to begin with without me adding to it by trying to bodge videos like that. I'm here to encourage transparency and good working practices - nothing more, nothing less. Cheers, Andy.

@BanditOneUK

7 жыл бұрын

Andrew Paul I never said you were a cowboy mate and yes I remember now the covers are white lol but your right there loads of people out there that board swop to much of that goes on !

@AndrewPaul

7 жыл бұрын

No worries at all mate. :-)

I have ps4 that will not stay connected to controller but unit first began to overheat So I took bottom off and will spin start the fan when turning on ps4 and now controller operates for short time then shuts off you can restart but shortly it again will shut down. controller will work non stop on otther ps4

@AndrewPaul

7 жыл бұрын

Replace the BT module on the motherboard. Tutorial for that is here: kzread.info/dash/bejne/lYh4lcyjn5TJorA.html

@curtisraymer4208

7 жыл бұрын

Thank you Approx. what would the cost of the BT module cost And what would you estimate cost of install

You should take a picture of the serial number to cross reference when the bastards try to pull a fast one over on you.

@B9NE

3 жыл бұрын

Serial doesn't matter if they switch the plastic casing lol

going to try this soon... wiith new my £40 solder station... ! :/

@AndrewPaul

7 жыл бұрын

Good luck - you might need it with that ha ha!

OK how should we proceed

@AndrewPaul

7 жыл бұрын

Sent you an email reply mate.

you still Alive?

@AndrewPaul

5 жыл бұрын

Sent you an email this morning mate. Cheers.

I need diagram

@AndrewPaul

6 жыл бұрын

kzread.info/dash/bejne/fYiFl6ykka_ckbw.html

Pin 18 would have been easier to jump to the pad right below it.

@AndrewPaul

5 жыл бұрын

I get what you mean however with fairly thick gauge wire running a bridge that short without upsetting the other end of the wire attached to the port could be a bit of a headache hence running it to the next component upstream.

@nitroman365

5 жыл бұрын

Andrew Paul I understand that. Why not just run a solder bridge? That's what I had in mind when I commented. Btw, I enjoy your videos and am glad to see someone else who knows what they are doing. There is no greater frustration seeing someone else destroy a console from inexperience. Much love from across the pond!

@AndrewPaul

5 жыл бұрын

Yeah it's definitely a possibility, however with the 1mm dia. solder I was stuck with at the time it could have gotten a little messy with bridges to adjacent pins. Many thanks for your comment :)

Ok of the shot I in 4 for 5 pounds sterling I send you a picture of the disaster tell me if it is still repairable thank you

@AndrewPaul

7 жыл бұрын

Will do.

Why don't you just buy the v2 port rather than bending legs? :) I have a few horror HDMI jobs in at the moment missing pads, diodes and other small components, IC that are half soldered etc should be acceptable to charge more for previously opened consoles.

@AndrewPaul

7 жыл бұрын

Indeed it should. v2 ports are no different from my previous experiences.

@bobfairfield2227

7 жыл бұрын

v2 port lines up perfectly and only part of the pins that you solder are visible same as the port used in the newer revisions and the CUH-1200 Series console. Love the videos by the way.

@bobfairfield2227

7 жыл бұрын

www.ebay.co.uk/itm/Sony-PlayStation-4-PS4-HDMI-Port-Display-Socket-Jack-Connector-Updated-Design-/171804302141?hash=item2800559b3d:g:pNgAAOSwgmJXzteY

mines been sent away finaly after so Long ps4 fix £60 it starts up white so if they send it back fucked evan more , they should fix the console end off!

Hi Andrew I have a private message on your mailbox as soon as you can Thank you cordially

Can you repair Mine lol

@AndrewPaul

6 жыл бұрын

Possibly. Where are you located?

@101mtype

6 жыл бұрын

Hi Andrew I am from Warrington I inherited the unit from my brother who bought the hdmi port replacement but never attempted the repair.

@AndrewPaul

6 жыл бұрын

Ah right OK mate no problem. Drop me an email to ytandrewpaul@outlook.com and I can send over the details / prices / mail-in address etc to you.

Pls shave your beard u Look way older