It seems a lot of resistors can go faulty on ps3 boards. In addition, without the oscilloscope it would have been extremely difficult to find the area of the fault. It pays to have a good board around to compare values. Thank you for another excellent repair.

Man, you are amazing!

Sir Jazak Allah Apki videos bht informative hoti hai. Aur sekhne ko b 👍

@idreestech

Жыл бұрын

Thanks for the visit

Great work! Please more video like that. To make it easier for the viewer I suggest you to show better where you are placing the probes. Sometimes is difficult to see because those components are tiny. Thanks again!

@idreestech

Жыл бұрын

These are the positive pins of capacitors like 230 Mf, 470 Mf, and 330 Mf.

@phoenixtiger101tube

Жыл бұрын

@@idreestech thank you sir.

@idreestech

Жыл бұрын

@@phoenixtiger101tube U r W c

Very nice sirji aap ka tarika la jabab sirji.

As always successful repair from best teacher ✅❤

@idreestech

Жыл бұрын

Glad you think so!

brother you are amazing ...god bless you plz continue

@idreestech

Жыл бұрын

Thank you so much 😀

Great work! Please more video!

@idreestech

Жыл бұрын

More to come!

What would be the fair price to fix this problem mate? Here stores near me charge 4000rs to fix it

Sir ji my PS3 console green light sometime then turn off solve the solution it should be really or not

recently , i was able to make short clips of your videos . so i can getting on them when ever i wanted watch a important information you mentioned . or whatch where do i probe to read voltages on test points with my multymeter. but i don't know why i can't do this on your current videos . did you close that opinion on you're youtube channel ?

@idreestech

Жыл бұрын

I did not do any changes dear.

Hello sir thanks for all your efforts you are the only one who try to fix that problem I have the exact problem on my ps3 and i followed all your videos related with that problem i don't know how to give power to mobo so i didn't test the voltage like you did in that video but i tested every resistors you tested in those videos and are fine except two things 1 the cmos resistors you found 201 ohm and 33 ohm and mine has 4k ohm and 33 ohm (cmos battery is there) 2 the resistor you replaced in the back Risistors in mine are different order there so i kind of lost there i tested them anyway some has 2.2k some has 3.3k some has 270 ohm Any advice sir and thanks in advance

@idreestech

Жыл бұрын

All looks fine. So dear may be some other error. Please watch more according to your machine errors.

@younes1412

Жыл бұрын

@@idreestech thanks sir I did i'll rewatch them maybe i missed somthing

@younes1412

Жыл бұрын

@@idreestech Sir i've checked all resistors you tested in those videos and all are fine exept some resistors and a capacitor who is removed by itself when i touched it

@younes1412

Жыл бұрын

Can i send you some pictures on facebook if that is ok

@idreestech

Жыл бұрын

@@younes1412 OK

Sir I have issue with my PS3 when I try turn on my PS3 the PS3 turn on perfectly but after sometime like after 2 min shutdown automatically can I used this method for that...

@idreestech

Жыл бұрын

It could also be due to tokkin capacitors.

My ps3 slim is doing the exact same thing. I wish you were close by because I would bring my ps3 to you for repair.

good work

@idreestech

Жыл бұрын

Thanks for the visit

Perfect master

@idreestech

Жыл бұрын

Welcome 👍

Thanx 😀 master

@idreestech

Жыл бұрын

Welcome 👍

Good work

@idreestech

Ай бұрын

Thank you! Cheers!

Is there any document with all resistances written down or you figure them out by yourself?

@idreestech

Жыл бұрын

No dear!

@medmusic7977

Жыл бұрын

Its called schematics, and yeah there’s schematics everywhere most have components written down, most have just letters and numbers like R1 R5 for resistors C1 for capacitors T3 for transistors What he does is take a ps3 model that works fine and write down all capacities if u dont have a clear schematic. But since its a ps3 there’s probably a detailled one, idk why he’s lying tho, some people like to look like magicians when they’re not.

@manosgouzibas8045

Жыл бұрын

@@medmusic7977 ps3 motherboards have a lot of revisions and to be honest i have not seens any detailed schematic about ps3 or ps4 device online. I fixed my ps4 by guessing missing resistance value and applyinh ohms law in order to calculate the proper value. Not much convenient.

thank you for this expierience)

@idreestech

Жыл бұрын

Welcome 👍

@user-my5ok6dj4n

Жыл бұрын

@@idreestech waiting for your next video)

I wish sir u were in India i have multiple ps3 slim which are dead and i showed it to repair guys here they won't able to fix it :'(

@surajkumar-ez1pl

Жыл бұрын

kzread.info/dash/bejne/on1oltOtj6iugZs.html

@idreestech

Жыл бұрын

Try them by yourself, dear.

very good job

@idreestech

Жыл бұрын

Thank you! Cheers!

Assalamu aleykum rahmetullah ve berakatu, I will ask about a malfunction. PS3 slim The problem is, I did a re-fluxing process to the processor. But I tried this without a professional BGA tool. I gradually heated the chip from 200 c to 210 c by applying flux. Now the red light on the device is fixed. When I start it, the fan is not spinning. It starts. It turns off after 20 seconds without making any beep sound. The red light goes out without any beep. There is no heating in RSX and cell. Another question I have. Professional. Unfortunately, I do not have the means to buy a tool. What should be the maximum reflow temperature of the chip with a hot air gun or station and how many minutes should it remain at that temperature on average to ensure reflow.Teşekkür ederim.

@idreestech

6 ай бұрын

First, set the heat gun to 180 to 200 degree and preheat the whole motherboard from both sides for about 10 to 15 minutes. Then give heat both sides of the specific chip at 480 degrees for about 3 to 4 minutes. It will help not to bend the motherboard. And lowers the chance of damaging the solder pads under the BGA chip .

I have one apart now. You mention someone used the wrong paste. What is the proper paste? Would arctic silver work?

@idreestech

2 ай бұрын

Arctic silver4 is one of the best thermal paste ever. But should be the original one.

I have a similar issue. I have a 2.2k resistor, is it ok to use instead?

@idreestech

Жыл бұрын

2.2 k is not the actual value. You need to check the exact value of a resistor taken down from another motherboard of the same model.

i have a model cech2501B, the layout seems to be different but the one measured 175 ohms here is measures 2.2k ohms on my motherboard. can you provide measurement for my model of ps3? Your videos are great help and looking forward to fixing mine. Thank you!

@idreestech

10 ай бұрын

Please tell the motherboard number like JSD-001 or something like that.

@mork7813

10 ай бұрын

@@idreestech yes it is jtp-001

@mork7813

9 ай бұрын

@@idreestech hi! can you help me find oit whats wrong with my board

Am experiencing the same problem right now sir and I am not a repairer, the guys here can't do it, what can I do am in Ghana

@idreestech

Жыл бұрын

It would help if you also learned to repair these consoles.

@iam_360barber_gh3

Жыл бұрын

Is it possible to learn it online

@idreestech

Жыл бұрын

@@iam_360barber_gh3 Yes.

@idreestech

Жыл бұрын

@@iam_360barber_gh3 Yes, dear!

@iam_360barber_gh3

Жыл бұрын

Ok

I have the same issue. Can you repair it?

@idreestech

Жыл бұрын

I hope so.

@umerjaved7016

Жыл бұрын

@@idreestech how can I send it to you?

@idreestech

Жыл бұрын

​@@umerjaved7016 Check the description, please.

EXCLLENT WORK ... HOW KNOW VALUE OF RESISTOR ...YOU HAVE SCHAMTIC?

@idreestech

Жыл бұрын

No.

@mostafashlivert9012

Жыл бұрын

@@idreestech YOU COMPARE RESISTOR FROM ANTHOR PS3 ?

Sir i was ps3 which i use after 1 year and that a response of my ps3

@idreestech

9 ай бұрын

Check for an SMD resistor that has deteriorated its value.

Hi sir my ps3 3008 have problem shutdown if I try to on My ps3 drop on high height can you fix it if I send you plz share me your address

@idreestech

Жыл бұрын

Please check the descriptions, thanks.

👍🇮🇳🙏

@idreestech

Жыл бұрын

Welcome 👍