A tiny little bit of drag brake at neutral is not a bad idea for a fast 2WD ARRMA crushing onroad speed truck like the Jato! Goodluck!! The Nitrogang is cheering for you guys!!

I respect the nitro game that’s were I started 20+ years ago… But you’re crazy if you think you’ll ever beat a build brushless car even a rtr car is hard to beat.

@IdRbye

4 ай бұрын

Totally agree. The right motor and right lipo battery on a brushless car and they are wicked fuckin fast

Loving this channel. It's been 40 odd years since my first guide-line plane, I bought a second hand tyrannosaurus during lockdown, and recently got an old Savage X 4.6. I love these little engines :D Keep up the good work please

Love the jatto. I just got the Revo. I wish i just had thought to order it threw my local hobby town USA. Keep up the great work. Hybrid the balde point old white pin trick for a pistan sleeve that is stuck is the take a look with me on the Dynamite .21 part 1. Video. Wish you and family health and wealth for 2023.

reaally nice . i got my jato stock with proline hyrax it reaches to over 75 mph really amazing those jatos

I’m going to get the jato for my birthday. I got my first nitro a classic tmaxx in 2003 for my birthday. I still have it and it still runs I just updated a few things

That stock "blue" pipe is so LOUD!! lol The first "mod" I did when I got my JATO was the 2 chamber pipe (my neighbors REALLY didn't like it at all... and it scared my son... lmao)

Great video hybrid, I love the way it sounds, it reminds me of a V10 Lamborghini Huracan

And a little heat and that baby woulda fired right up!!

The OS .21 TM is a truck motor. It turns less rpm than the 3.3 does. But if you use the OS 11K carb on the 3.3 it wakes the engine up big time. My revo 3.3 rips wheelies with that set up.

Nice build the O.S. tm is a beast of an engine.

Sickening Jato

@hybrid32494

Жыл бұрын

Special thanks to you bro for building it. When the weather warms up it will be Speed Jato Stage 2!

@trife74

Жыл бұрын

They had a terrible tune on that so i didnt wanna start

@hybrid32494

Жыл бұрын

@@trife74 hey my dude!! Yes, that might have been it also. This was a pretty cold day as well so that didn't help either.

Sweet Jato, hope to see it racing!!!!

What a great combo for the Jato NWO 👍👊💪

@hybrid32494

Жыл бұрын

thank you man!! More on this model soon, so far the engine just went though it's break in and we are waiting for some warmer weather until we challenge some Arrmas to a death speed match, lol.

We need to see this drag jato run now! Great content!

What did you all need ti do this setup? I have an old jato id like to get running and setup like yours in the video . What manifold do i need for the traxxas exhaust?

Hey hybrid, getting back into the nitro hobby and a buddy dropped off a jato. Had a question what makes the trans shift into second? This one after i got her running seems to be very rich. Never had one that had two speeds so was listening never heard it shift but the carb needs some tuning . Any help would be great . Thanks James

Good day sir! I’m picking up a Jato from a buddy and I have an OS .21 to put in it. Was wondering what exhaust header/manifold you are using for this setup? I would like to get one myself. Thanks

What exhaust manifold are you using? I have the same OS in a revo but i want to throw it in my Jato. Thanks

What exhaust is that? I have a .21 O.S. and want to put it in my rustler but concerned about the header. Thanks nitro gang.

I just got a new motor for my 2021 jato again. And it’s my 3rd one again. I replace 6 motors now

@taylorscott9785

2 ай бұрын

Maybe stop buying that motor then?

@billymanilli

8 күн бұрын

how much do you drive that thing? ..or do you not know how to tune and maintain it? I have some RCs with the original nitro engines from the early 90's that still run

@therccelebrityspeedfresh5393

8 күн бұрын

@@billymanilli oh I know how to tune them. I been doing it for 24 years now

@therccelebrityspeedfresh5393

8 күн бұрын

@@billymanilli I had a 2007 jato 3.3 I re tune it 15 years ago and no problems. I’m the expert on tuning I’ve tune it right before

great video.. was thinking about turning my nitro slash into a drag car.

i really appreciate the tune sections of the video and start up trouble shoot in general...... because of you bro, i ran THREE count it THree 1/16 exceed nitros sunday at home,, and working on getting both 4.6 savages fixed.. you are accomplishing your goal of mas nitros... sickening

Hey, can you tell me how you converted the front to accept 12mm hex? Any part numbers

sickening JATO!!! Dan that was awesome dude> Great video Hybrid!

Love a O.S. Engine... Curious to find out the top speed with that set up.

@hybrid32494

Жыл бұрын

me to dude! there have also been gearing changes to get the Sickening TOP SPEEDS going, engine has been broken in and a few weeks from now when the weather is better we will test it out for good.

Nice job guys 🔥 Great Car 👍 Stay warm

Never thought about flipping the brake lever and taking out the spring...I may try that!

@hybrid32494

Жыл бұрын

What’s up dude, thanks for checking out this video. I have another video on this channel that explains and shows exactly how to do the jato break mod do a search for it on this channel.

heat that wheelie bar up and push it down so the front tires cant come up might help control a bit just a thought

Great build guys looks amazing bro

@hybrid32494

Жыл бұрын

thank you man!! More on this Jato soon!! Project Jato Speed Part 2!!!

@rcnitroflux2361

Жыл бұрын

@@hybrid32494 yeah bud can't wait to see os .21 go bro

Looks great and sounds greats. Can't wait to see it out run an arrma

@hybrid32494

Жыл бұрын

You and me both!

This jato looks gr8 n so fast

Is there a follow up video to this? I would love to see it run.

She's gonna rip!! Sickening Jato!

I'm looking for a good all terrain rear wheel/tire for my jato. Anacondas are uncontrollable off hot pavement. Any recommendations ????

@justinoconnor1472

Жыл бұрын

I've got paddle tires on my jato works great on any off road surface. Plus a really good roost is a plus for me.

How did he do the front wheels setup?

I think 70+ mph is possible with that setup. Look forward to seeing the results.

What header did you use?

Sickening

You can put the battery for receiver in center of the jato

@hybrid32494

Жыл бұрын

hey bro! yes, thank you for watching. This jato has the battery all the way in the front, not even in the middle. But I'm aware of the center position also. thanks man! See you again soon.

Yo D , sorry I haven’t been around watching the masterpiece videos the last week ,, I’m in florid w the family until Wednesday.. so I’ll be back and locked in to the hybrid vids. Scotty Z 👍👍

Great video brotha

@hybrid32494

Жыл бұрын

thank you my dude!!

Excuse me but what header are you using ?

Hell yea dan y tood me to swap the tm carb to the 3.3 and holly hell did this thing wake up back to back 68mph!!! On stock tires and gearing! If i swap to foams and gearing I would whip the crap out of any arrma

Wanna kick it up even more? Have the os 21tm modded by a good modder (RB Mods does great work as he did my os 21tm on my revo), and if u want it stronger yet and louder go with an ERCM end bleed pipe (with a larger .21 stinger to match the os 21tm engine).. make sure u run also a good 30% nitro with 8-12% oil content (I use Bones Brew 30% nitro 10% oil with an ercm small block pipe on truggy bleed for my modded os21tm powered revo 3.3.. it's loud and strong!).. amazing jato btw!

Great upgrade. By the way what is the difference between a 2.5 engine and a 2.5R engine?

@hybrid32494

Жыл бұрын

hey bro! great question. I used to own the very first Revo with with factory 2.5R motor. I will tell you its absolutely the same as a regular 2.5. The only difference is the 2.5r model came with the first blue cooling head for the revo model.

Any updates on this yet? Also, shouldn't you use a 1/8 scale/big block pipe for the 21TM? Maybe you/Dan could do a comparison with different pipe use .Thanks for the vid

@hybrid32494

Жыл бұрын

Hey man how are you doing, thanks for checking out this video. Dan and I have recorded a newer update video after this one so you will see it probably in a week or two. I thought about the larger pipe as well so you bring up a good point, these motors are designed to be direct droppings for all Traxxas vehicles and almost no one really installs a larger pipe. This is a good topic to look into I will do more research thanks for a great idea. See you on the next Stream Bro NitroGang.

@a2rc

Жыл бұрын

@@hybrid32494 looking forward to the update

great video

Definitely a 3 second beast in 132 feet

Would love to see you do a large segment on the HPI R40 in one of your live streams.

@hybrid32494

Жыл бұрын

Hey my fellow Nitro brother. That is a terrific idea, I have been looking for an HPI R40 for at least the last couple of years hopefully I will come across one soon and be able to get one for the channel.

I hope bro got another pipe for that thing! That resonator isn’t much if not at all better than a stock pipe. Put a THS on that baby!

Ok Iam down for the challenge Iam in N.J I have a losi 22s and Traxxas slash for that lol👍

Just a little thing I wanna say, and I could be wrong(I usually am)😂 but I’m pretty sure If you are trying to lower the idle, you wanna lean the low speed a little bit, to allow less fuel t get in at low and idle speeds, that’s how I tune my trucks like my jato and ten t and tmaxx(I have more trucks, but those 3 have a 3.4 with a os 11k, which is much better then the 3.4 carb) and they will idle for a full tank

@Dirtypigeon

Жыл бұрын

Wrong

@superaidenproductions1870

Жыл бұрын

@@Dirtypigeon alright dirty pigeon, I guess I’m wrong, my bad.

@Dirtypigeon

Жыл бұрын

@@superaidenproductions1870 lean then idle down lean then idol down… when you lean it it will idol up then you back off idol screw to idol down some .. if you richen low screw it will idol down.. but key is to get slide closed to create more power from the the bottom !!! small gap !! Lean, idol down, check power in that order !!!

@superaidenproductions1870

Жыл бұрын

@@Dirtypigeon I already know that, idk wtf I was going on abt on that comment

@superaidenproductions1870

Жыл бұрын

@@Dirtypigeon because when you richen the low the idle decreases so obviously the opposite would make It go up

What wheel setup is on the Jato?

@hybrid32494

Жыл бұрын

Hey buddy, thanks for checking out this video. The front wheels are from one of the Traxxas drag cars you could easily find them online. The rear wheels are mickey thompson drag slicks normally used for the drag cars.

And O'Neil brothers racing out California is coming out with 35.7cc engine for hpi Baja 5b sorry alittle off topic

Jato baby 💪🏼💪🏼💪🏼

@hybrid32494

Жыл бұрын

you know it bro! The most sickening 2-speed there is. We gonna break one in soon, you know what I'm saying, lol.

@mikeinsi87able

Жыл бұрын

@@hybrid32494 yessir 😎

Niiiiice

@hybrid32494

Жыл бұрын

thank you dude! More on this jato soon, including some speed runs.

Lotta $$$ OS motor... is it a direct fit for a T-Maxx

@hybrid32494

Жыл бұрын

yes bro, there is a version of the OS21 tm with the t-maxx manifold. I've linked one in the description to this video with the revo manifold, but there is one there also with the t-maxx style exhaust header also. It's the best direct fit motor for the traxxas products, and you dont need a big block motor mount kit either.

But I will agree jato is very good platform for speed handling I use to hate Traxxas I don't care mutch for the 3.3 but everything I use to run ened up with o.s engine

Built one couple years ago

@hybrid32494

Жыл бұрын

gotta love the JATO drag builds right bro.. I agree.

@wesleymorgan7894

Жыл бұрын

@@hybrid32494 definitely last year I got away from nitro electric decided go hpi Baja 1/5 scales whatched ur videos on you tube I've got two them the original and one that was build off the ss but I've turned it into one my own lot up grades

@wesleymorgan7894

Жыл бұрын

@@hybrid32494 you going bring ur Baja back on KZread you no they released the new build it urself kit back in November

Racers get ready get set a few hours later go home😂😂

60FPS Feel the speed! Nitro4ever!

😲Damn it hurts to see a engine fired up in freezing condition without preheating

No fuel I can hear it prime it

@hybrid32494

Жыл бұрын

hey bro! Yes, we had a bit of a primer issue on this day, lol! This was the first start on this motor, so to be expected.

hello!! Could you tell me which brand this Manifold is from?

@aaroncavanaugh8241

Жыл бұрын

If I had to guess.. it's a Novarossi header or THS Racing header made for nitro rustler or similar cuz I had 2 Novarossi headers.. one in a long tube design I sold to a buddy for his nitro slash, and other is a short one I kept for my 2.5 powered rc10gt as a future install when the 2.5 kicks the bucket)

Typhon already won 😂😂😂

Im gonna build the fastest nitro rc car to destroy all the electrics gonna cost alot but i have to do it lol

@Nathan-qt2zi

11 ай бұрын

Sadly it's not possible electric is a lot faster

Dead starter battery! Common guys

im selling it

The only problem with Arrma is that they dont make Nitro.

What clutch and pinion? My 3.3 is toast

@hybrid32494

3 ай бұрын

hey buddy! I recommend you get the stock parts for it, they are a good fit and should last a long time, unless you're building something custom.

@VeneerSlinger

3 ай бұрын

@hybrid32494 not going with anything custom. Just want to get it back moving. I'm just now learning they're compatible with factory jato clutches