#nitro #rc #rccars #nitrorclife music by www.bensound.com @SLC_nitro thank you for letting me review your engine
Жүктеу.....
Пікірлер: 46
@NitroMeep3.3 Жыл бұрын
I got one still in the Box 😊 waiting on my 3.3 to blow up.
@Nitro_rc_life
Жыл бұрын
Yeah I need to buy one they look super nice
@user-ch3ql7nb2r
9 ай бұрын
Saleme
@SLC_nitro Жыл бұрын
Wow cant wait! Thanks for your help on the screws buddy!
@Nitro_rc_life
Жыл бұрын
Of course
@nevrxhale96609 ай бұрын
Just scored this engine on a heavily upgraded revo I bought for parts for my existing revo. The guy installed it along with a new THS pipe and header and never even broke it in. Life got in the way and it spent many years hanging on his wall untouched. Not a bad buy for a buck-fiddy😊
@Nitro_rc_life
9 ай бұрын
Wow very impressive just take your time breaking this engine in it like to be stupid rich in the beginning and super sluggish till 1qt then it will allow you to start leaning it off
@TheGhostman13211 ай бұрын
I would love to see other manufacturers to copy the force starter design so that the startshaft would not rotate all the time. It wears the oneway bearing and the backplate bushing pretty fast. Also it creates a lot of drag that eats power output which is useless to throw away. The carb on O.S engines are the best. Never throw away that one. I love the third needle that is missing on everything else. Many carbs work on full power and idle, but not between. OS works on all the throttle positions.
@Nitro_rc_life
11 ай бұрын
I have struggled so hard on the 3needle carb I ended up buying a new engine that's what replaced my axial was a alpha .28 rtr
@TheGhostman132
11 ай бұрын
@@Nitro_rc_life Even 3needle does not help when the overal design is flawed 😉 It just gives additional adjustment if needed but can't fix something that is already broken.
@mxracingunlimitedltd77844 ай бұрын
It wasnt really OS's fault with the screws. First of all im sure they had some loctite so some heat, but regardless once you feel it that tight, you stop. It was pretty obvious that was going to happen You need to use an impact screwdriver for those tight screws like that. Thats what its made for and it wont slip off or strip anything. Just an FYI for the future..
@Nitro_rc_life
4 ай бұрын
Thanks for the info bit this is a very known issue
@mxracingunlimitedltd7784
4 ай бұрын
@@Nitro_rc_life Impact screwdriver probably wouldn't of stripped it though, and if it did then not that easy though, thats all im saying. Plus there is a Japanese version of a Philip's screwdriver. I have a few and they're better than any american made metric phillips and they fit these weird sized chinese and Japanese screws on things like this and motorcycle & scooter carburetor's, all things like that.. Theyre called JIS Screwdrivers.. Look uo the Vessel Impacta. Its an impact driver built all into a regular screwdriver handle. Not as good as a full impact screwdriver but still works you can feel it moving it nice..
@Nitro_rc_life
4 ай бұрын
I will check them out I didn't know any of that's that's pretty cool knowledge
@brandonpfister10 ай бұрын
I would want it in a display case!😅
@Nitro_rc_life
10 ай бұрын
Naw need to be ran what a fun motor tonZ of powwa
@brandonpfister
10 ай бұрын
@@Nitro_rc_life Hahaha! I know!!! It sure is nice, though. Wow! 😃 I can appreciate the beauty of a machine, for sure.
@JakeHughes-oo7gy5 ай бұрын
Should you disassemble the engine out of the box before you run it ??
@Nitro_rc_life
5 ай бұрын
I would 💯 say yes!!!! I have found metal shaving inside brand new engines
@brandonpfister10 ай бұрын
What a beauty!
@Nitro_rc_life
10 ай бұрын
Yeah buddy!
@nighthawkj30A47 ай бұрын
This is one of the Best Engine to install and run in Traxxas Revo 3.3 and Tmaxx 3.3
@mrhuber1010102 ай бұрын
Im expecting my o.s. .21tm in the few days can you tell me what the size of the back plate screws are. Id like to replace mine with hex before i install it on the tmaxx! Loved the video!😁
@Nitro_rc_life
2 ай бұрын
M2.5
@Nitro_rc_life
2 ай бұрын
M2.5x10mm
@terryshrives83227 ай бұрын
It’s ok. The price is ridiculous. Theres really nothing I see to justify he price. Thats os for you.
@darkxtrem202 ай бұрын
Tengo un carburador os.11k, sabes cuál es la configuración de fabrica? Vueltas de agujas de alta y baja?
@Nitro_rc_life
2 ай бұрын
In the owners manual it says flush with ball link and flush at high needle body and 1 mm in on mid. I'm assuming it's measured at the slot.
@carlito2765 Жыл бұрын
Ola,.. Serve na T Maxx 3.3 ?
@Nitro_rc_life
Жыл бұрын
No habla espanol
@adamformanack318 Жыл бұрын
MAX.21 IS BETTER an i wish i never killed mine..😎💯✌
@evil14life2 ай бұрын
You stripped the screws because you used the wrong driver. O.S. is a Japanese company. They are J.I.S., or Japanese Industry standard screws. The heads are not the same as a Phillips screws.
@Nitro_rc_life
Ай бұрын
Well it's got hexes heads in it now
@chigerworld98265 ай бұрын
to much money 374 no way ill pay for that not worth it
@Nitro_rc_life
5 ай бұрын
Other eBay sellers are cheaper sometimes you have to wait for stock
@CrazyDad226 Жыл бұрын
Hey should i buy a .21 tm that fits direct fit. Or should i get a .21 big block conversion kit? I have a .21 to put in my Revo. Keep up the content.💯🇱🇷🔥🫡
@NitroMeep3.3
Жыл бұрын
My 21TM is a direct fit, even uses the easy start.
@SLC_nitro
Жыл бұрын
I went with th os on the revo because the big block conversion is more complicated. Some have to shift the transmission or shave the rear a arm. Tmaxx you can move stuff around easier
@Nitro_rc_life
Жыл бұрын
With o.s you have quality and a conversion can lead to complications but can be achieved successfully. Honestly it won't matter which way you go cause you will enjoy the build process regardless. Plus as long as your happy that's all that matters. You should join my fb group and post some of your builds. It's the same name as here
Пікірлер: 46
I got one still in the Box 😊 waiting on my 3.3 to blow up.
@Nitro_rc_life
Жыл бұрын
Yeah I need to buy one they look super nice
@user-ch3ql7nb2r
9 ай бұрын
Saleme
Wow cant wait! Thanks for your help on the screws buddy!
@Nitro_rc_life
Жыл бұрын
Of course
Just scored this engine on a heavily upgraded revo I bought for parts for my existing revo. The guy installed it along with a new THS pipe and header and never even broke it in. Life got in the way and it spent many years hanging on his wall untouched. Not a bad buy for a buck-fiddy😊
@Nitro_rc_life
9 ай бұрын
Wow very impressive just take your time breaking this engine in it like to be stupid rich in the beginning and super sluggish till 1qt then it will allow you to start leaning it off
I would love to see other manufacturers to copy the force starter design so that the startshaft would not rotate all the time. It wears the oneway bearing and the backplate bushing pretty fast. Also it creates a lot of drag that eats power output which is useless to throw away. The carb on O.S engines are the best. Never throw away that one. I love the third needle that is missing on everything else. Many carbs work on full power and idle, but not between. OS works on all the throttle positions.
@Nitro_rc_life
11 ай бұрын
I have struggled so hard on the 3needle carb I ended up buying a new engine that's what replaced my axial was a alpha .28 rtr
@TheGhostman132
11 ай бұрын
@@Nitro_rc_life Even 3needle does not help when the overal design is flawed 😉 It just gives additional adjustment if needed but can't fix something that is already broken.
It wasnt really OS's fault with the screws. First of all im sure they had some loctite so some heat, but regardless once you feel it that tight, you stop. It was pretty obvious that was going to happen You need to use an impact screwdriver for those tight screws like that. Thats what its made for and it wont slip off or strip anything. Just an FYI for the future..
@Nitro_rc_life
4 ай бұрын
Thanks for the info bit this is a very known issue
@mxracingunlimitedltd7784
4 ай бұрын
@@Nitro_rc_life Impact screwdriver probably wouldn't of stripped it though, and if it did then not that easy though, thats all im saying. Plus there is a Japanese version of a Philip's screwdriver. I have a few and they're better than any american made metric phillips and they fit these weird sized chinese and Japanese screws on things like this and motorcycle & scooter carburetor's, all things like that.. Theyre called JIS Screwdrivers.. Look uo the Vessel Impacta. Its an impact driver built all into a regular screwdriver handle. Not as good as a full impact screwdriver but still works you can feel it moving it nice..
@Nitro_rc_life
4 ай бұрын
I will check them out I didn't know any of that's that's pretty cool knowledge
I would want it in a display case!😅
@Nitro_rc_life
10 ай бұрын
Naw need to be ran what a fun motor tonZ of powwa
@brandonpfister
10 ай бұрын
@@Nitro_rc_life Hahaha! I know!!! It sure is nice, though. Wow! 😃 I can appreciate the beauty of a machine, for sure.
Should you disassemble the engine out of the box before you run it ??
@Nitro_rc_life
5 ай бұрын
I would 💯 say yes!!!! I have found metal shaving inside brand new engines
What a beauty!
@Nitro_rc_life
10 ай бұрын
Yeah buddy!
This is one of the Best Engine to install and run in Traxxas Revo 3.3 and Tmaxx 3.3
Im expecting my o.s. .21tm in the few days can you tell me what the size of the back plate screws are. Id like to replace mine with hex before i install it on the tmaxx! Loved the video!😁
@Nitro_rc_life
2 ай бұрын
M2.5
@Nitro_rc_life
2 ай бұрын
M2.5x10mm
It’s ok. The price is ridiculous. Theres really nothing I see to justify he price. Thats os for you.
Tengo un carburador os.11k, sabes cuál es la configuración de fabrica? Vueltas de agujas de alta y baja?
@Nitro_rc_life
2 ай бұрын
In the owners manual it says flush with ball link and flush at high needle body and 1 mm in on mid. I'm assuming it's measured at the slot.
Ola,.. Serve na T Maxx 3.3 ?
@Nitro_rc_life
Жыл бұрын
No habla espanol
MAX.21 IS BETTER an i wish i never killed mine..😎💯✌
You stripped the screws because you used the wrong driver. O.S. is a Japanese company. They are J.I.S., or Japanese Industry standard screws. The heads are not the same as a Phillips screws.
@Nitro_rc_life
Ай бұрын
Well it's got hexes heads in it now
to much money 374 no way ill pay for that not worth it
@Nitro_rc_life
5 ай бұрын
Other eBay sellers are cheaper sometimes you have to wait for stock
Hey should i buy a .21 tm that fits direct fit. Or should i get a .21 big block conversion kit? I have a .21 to put in my Revo. Keep up the content.💯🇱🇷🔥🫡
@NitroMeep3.3
Жыл бұрын
My 21TM is a direct fit, even uses the easy start.
@SLC_nitro
Жыл бұрын
I went with th os on the revo because the big block conversion is more complicated. Some have to shift the transmission or shave the rear a arm. Tmaxx you can move stuff around easier
@Nitro_rc_life
Жыл бұрын
With o.s you have quality and a conversion can lead to complications but can be achieved successfully. Honestly it won't matter which way you go cause you will enjoy the build process regardless. Plus as long as your happy that's all that matters. You should join my fb group and post some of your builds. It's the same name as here
@Nitro_rc_life
Жыл бұрын
Well said
@NitroMeep3.3
Жыл бұрын
@@Nitro_rc_life lol I already am.