Thanks for reviewing this one. I've been running this engine in my Slayer for years, had really good luck with them. Pretty bullet proof in my experience. It was good to see you take it apart and go over some of the finer details, thanks again.
@JakeHughes-oo7gy4 ай бұрын
I would pick up a picco over this engine but I want to try one!
@nighthawkj30A42 жыл бұрын
Just bought this for my New Tmaxx 3.3 few days ago waiting in the mail to get here. The Trx 3.3 is good engine but after 1 year of it i want to upgrade to Japanese Designed and Built rc engine. 😎
@valuerc2664
Жыл бұрын
Did you notice any difference?
@F-U-Trudeau-U-Commie
Жыл бұрын
The 3.3 is a pile of steaming 💩
@nighthawkj30A4
Жыл бұрын
@@valuerc2664 Major Differences
@nighthawkj30A4
Жыл бұрын
@@F-U-Trudeau-U-Commie it is i had alot of high hopes with the 3.3 because it be released after the 2.5 but it terrible engine. The 2.5 how ever with a good carburetor such as O.S. 11k and LC3 glow plug. Its actually a good engine.
@thebug40463 жыл бұрын
Ran one they came out and the price here in canada was 450$ new a lot to much haha but all in all a good basher very reliabel and tuned good. i would like to see your opinion on the dynamite 19 one day
@DoRC3 жыл бұрын
Can you review the Dynamite 19? It's the other alternative to the Traxxas 3.3.
@trickmustang19943 жыл бұрын
I've had one in my revo for years now and just recently the engine stopped running one day. Took it apart and the rod was broke so I had to order another which was not cheap for what it is.
@brandonraines9114
2 жыл бұрын
What was mph difference then the 3.3?
@dowboykfx4702 жыл бұрын
What's your top 3 nitro 21 engine brands?.
@BlowinLoud8799 Жыл бұрын
Can you use the stock traxxas exhaust?
@afrewer943 жыл бұрын
Rex, I remember you mentioned in a recent video how OS tends to have coarser or finer threads on the needles than Italian ones. Can't remember which way it was. Can you remind me? Thanks.
@TheRwmods
3 жыл бұрын
I am not sure i mentioned it, not really sure which one is finer.
@ashermorales82763 жыл бұрын
I’m taking apart an engine to replace the front and rear bearings and the con rod. Since the rear bearing was going out the piston has a bunch of little scratches and scuff marks. The engine still had good compression before taking it apart and the piston still slides smooth and freely in the sleeve until top dead center. I shouldn’t need to reply the piston and sleeve right?
@TheRwmods
3 жыл бұрын
It might need a pinch. It might feel like it still has pinch but it is the pieces of bearing mixed in there that tighten it up.
@ashermorales8276
3 жыл бұрын
@@TheRwmods okie dokie. Thanks for the info
@trickmustang19943 жыл бұрын
How can I get in touch with you to have a engine repinched?
@TheRwmods
3 жыл бұрын
e-mail rwmods@yahoo.com my prices are on my site, www.rwmods.com
@trickmustang1994
3 жыл бұрын
@@TheRwmods thank you.
@reapgaming4320
3 жыл бұрын
@@TheRwmods rest easy man you well truly be missed!✝️🙏🥲
Пікірлер: 25
Thanks for reviewing this one. I've been running this engine in my Slayer for years, had really good luck with them. Pretty bullet proof in my experience. It was good to see you take it apart and go over some of the finer details, thanks again.
I would pick up a picco over this engine but I want to try one!
Just bought this for my New Tmaxx 3.3 few days ago waiting in the mail to get here. The Trx 3.3 is good engine but after 1 year of it i want to upgrade to Japanese Designed and Built rc engine. 😎
@valuerc2664
Жыл бұрын
Did you notice any difference?
@F-U-Trudeau-U-Commie
Жыл бұрын
The 3.3 is a pile of steaming 💩
@nighthawkj30A4
Жыл бұрын
@@valuerc2664 Major Differences
@nighthawkj30A4
Жыл бұрын
@@F-U-Trudeau-U-Commie it is i had alot of high hopes with the 3.3 because it be released after the 2.5 but it terrible engine. The 2.5 how ever with a good carburetor such as O.S. 11k and LC3 glow plug. Its actually a good engine.
Ran one they came out and the price here in canada was 450$ new a lot to much haha but all in all a good basher very reliabel and tuned good. i would like to see your opinion on the dynamite 19 one day
Can you review the Dynamite 19? It's the other alternative to the Traxxas 3.3.
I've had one in my revo for years now and just recently the engine stopped running one day. Took it apart and the rod was broke so I had to order another which was not cheap for what it is.
@brandonraines9114
2 жыл бұрын
What was mph difference then the 3.3?
What's your top 3 nitro 21 engine brands?.
Can you use the stock traxxas exhaust?
Rex, I remember you mentioned in a recent video how OS tends to have coarser or finer threads on the needles than Italian ones. Can't remember which way it was. Can you remind me? Thanks.
@TheRwmods
3 жыл бұрын
I am not sure i mentioned it, not really sure which one is finer.
I’m taking apart an engine to replace the front and rear bearings and the con rod. Since the rear bearing was going out the piston has a bunch of little scratches and scuff marks. The engine still had good compression before taking it apart and the piston still slides smooth and freely in the sleeve until top dead center. I shouldn’t need to reply the piston and sleeve right?
@TheRwmods
3 жыл бұрын
It might need a pinch. It might feel like it still has pinch but it is the pieces of bearing mixed in there that tighten it up.
@ashermorales8276
3 жыл бұрын
@@TheRwmods okie dokie. Thanks for the info
How can I get in touch with you to have a engine repinched?
@TheRwmods
3 жыл бұрын
e-mail rwmods@yahoo.com my prices are on my site, www.rwmods.com
@trickmustang1994
3 жыл бұрын
@@TheRwmods thank you.
@reapgaming4320
3 жыл бұрын
@@TheRwmods rest easy man you well truly be missed!✝️🙏🥲
@Taboloncawonthemasters
Жыл бұрын
@@reapgaming4320 did he pass away??
$300 🇨🇦or 🇺🇸
@marc5384152
Жыл бұрын
us