Project Kermit 17: A Series Land Rover Full Restoration
Автокөліктер мен көлік құралдары
The chassis is so shiny! Newly dipped in zinc, it's now restored well beyond it's original spec. I expect the chassis to last forever, or at least longer than I will. The rest of the project is now merely a case of bolting everything else back onto it...
Project Kermit is a 1978 Land Rover Series 3 109 (long wheel base) which is being stripped right down and rebuilt with a 200tdi engine and a few other improvements. The other videos in the series can be found in this playlist: • Project Kermit: A Seri...
If you want to join those supporting my channel you can check out my Patreon page here:
www.patreon.com/user?u=37285132
With the support of Patrons I am able to make more and hopefully better content without needing any corporate sponsors. In return they get extra videos, updates and behind the scenes photos.
If you would rather make a one-off donation you can do that via paypal here: www.paypal.me/MaximusIronthumper
All Paypal donations are now going straight to Project Awesome and will be credited on those episodes.
Many many thanks to all those that have supported me and the channel but please only send money if you have it to spare!
My website:
maximusironthumper.co.uk/
Пікірлер: 128
"That patch for the engine mount won't be a problem because it'll be covered in oil!" Made me choke on my coffee! ;)
Looks great Max, you must be well chuffed. For some reason it's a little unsettling seeing you out and about in the 'real' world on a motorway, surrounded by the general public and modern vehicles. Maybe because in my mind's eye you exist only in this little off-grid plot away from all that stuff!
@maximusironthumper
2 жыл бұрын
It's a little unsettling for me too!
@thejoetree
2 жыл бұрын
Haha!
@jamesgibb9737
2 жыл бұрын
@@maximusironthumper lol I know what you mean 🤣
@volvo-express
2 жыл бұрын
#coldwarmotors had the same issue going to the shops. I love the videos!!
I worked in a galvanising place many years ago, none of them like doing "old" stuff because if it's not been cleaned and prepared properly it contaminates the tanks. Looks good but I'd still whack cavity wax inside it just in case of missed bits.
It's pretty much hedge proof now!
@mumblbeebee6546
2 жыл бұрын
That was my first thought too, “now it can mature safely among the brambles” - sorry, Max! And congrats to see it looking so fine, your prep work was spot on!
11:50 Maximus: I feel weak Also Maximus: Lift's off a whole frame off a trailer and tilt it to it's side.
My grandfather used Newport Galv (we are near Stroud) in 1991 on our S2 LWB Pick up. Like yours, it was less twisted when it came back! We could noth fathoum that out. Still pump in wax oyl each year, but its solid - and I inherited it (RIP Seth), sadly, in 2018, still stinking of cigars and ahheeem, whisky. This video has taken me back to when I was 14, so thanks!
Is easy to patch up any missed bits. Buy a stick of zinc (looks like plumbers solder), grind chassis clean and brush on the zinc with the oxy. But you probably know that. Thanks Max.
@maximusironthumper
2 жыл бұрын
Good tip, I've also got the cold glav coating I used on the axels, fortunately that mount seems to be the only duff bit.
Proper job Max. Love your Capt Nemo diving kit for sand blasting. Thank you for the videos. Very much appreciated by an old dinosaur with a series 3 awaiting restoration for a young family member who spotted it in a bramble patch when visiting for the first time.
I must admit i do enjoy the team work when yourself and bunglestrumpet work together. You do have a good synergy.
"Now it's just a case of putting it all back together!"
@maximusironthumper
2 жыл бұрын
Easy peasy! I could do with some help if and when you can fit me into your busy summer schedule :-)
@spungletrumpet
2 жыл бұрын
@@maximusironthumper Yeah, it's all a bit mad at the moment. Nice to be working on events again though!
You've probably got the straightest Series Land Rover chassis in Britain now!
Your videos are gold Max, much appreciated 👏🏻👏🏻👏🏻
Well done, you've turned a corner there!
I am sure Lemmy will be looking down from heavy-metal heaven and admiring Max's Silver Machine.
I reckon although the price sounds expensive it is actually pretty good especially when you think how much time you’ll save in future by not having to revisit rust spots. That chassis and bulkhead look great.
All commodities have gone up, no doubt zinc as well. Chassis looks good!
Can't wait looks class
Time for a beer Max! Congratulations on a job well done!
Would you consider doing a quick video about your life previously what inspired you to become self sufficient/living off grid? Keep up the good work Max👍
Ooooh Shiney :)
I’m a galvaniser from up north and the place we’re your engine mount was, should not have been missed it should have been degreased or ground down before going in the acid id get in touch and ask them to send you some Galv spray as it’s a defect and should have been sorted out by the fetling department
A Land Rover for life, the big kids meccano set build off video's begins with bright shiny bits getting bolted together, this is way better than watching Boyd Coddington whinge at his creative staff. 73
Possibly all the bumping it about on/off the trailer etc knocked it into shape… either way it’s a bonus 👍🏼 can’t wait to see this go back together.
All the parts look great. Onwards and upwards.👍🏻👌🏻
I really love this series!
Hello Max, Looks like a really good job and great news that the alignment has not gone wrong... an enjoyable video, thank you. Cheers. Paul,,
All you need now is a big old electric motor and some batteries for affordable eco motoring (over relatively short distances) 😃😃
@maximusironthumper
2 жыл бұрын
It's on the list, at least for one of the landys!
@davidbrodie5044
2 жыл бұрын
@@maximusironthumper - that will be really interesting, I'm thinking similar but haven't got beyond the thinking as yet😀
@japersjolly8763
2 жыл бұрын
@@maximusironthumper Go for the water powered car Max, much more interesting
@chriscoulthard4947
Жыл бұрын
There is probably an old milk float in a hedgerow somewhere........
Looking forward to watching this rebuild.....After you've finished project awesome 😁
A great start for the rebuild
Awesome Max, brilliant to see it at this stage!
This is a cool project. Can't wait to see the finished vehicle.
Great job and looking forward to the rebuild 👍🏻
Looks great Max, can't wait to see the rest of the restoration.
Very nice result all round
'Just got to put it back together'. that's what I'm thinking after respraying my motorbike frame lol. I think you're more capable of achieving it than I am.
Great entertainment as always, the chassis and parts look amazing. Well worth the effort.
An excellent video, as always. Thank you.
Sandelin curve relates the silicon content to zinc thickness, get it in structural sections too
Its true that weld wire is a different chemistry, so the zinc coating is thicker over the welds. The steel doesn't change dimensions, doesn't come proud of the base metal, just the zinc thickness is much thicker over the weld. Its avoidable by using weld wire the same grade of steel (same chemistry) as the steel being welded.
@maximusironthumper
2 жыл бұрын
Yes of course. I did not phrase my explanation very well!
I love that two man sandblasting apparatus.
I know neither channel will have the time to do this but Maximus should collaborate with Edd China, especially on Project Awesome cos that would be right up his street!
Another entertaining video, the chassis looks great.
👍👌👏 Looks great. Now I'm eagerly looking forward to watch the car being reassembled. Best regards luck and health
Today i would like to add comment during the video, so: i paused at 0:02 and got me some food, a beer and found my best chair. This is going to be so good.... What a nice litte story, i liked it. Looking forward to the repair of the repair to get it finished. what do you think, about the difference between the real dipped galv, against the cold galv (i think it was called zinga?) Thank for the video =)
@maximusironthumper
2 жыл бұрын
Both have their place, for enclosed sections it has to be hot dipped and it leaves a nice thick layer of zinc, on the other hand, some things you wouldn't want to dip (axle casings, cast iron) so the zinga wins out for those.
Excellent stuff I spent ages drilling all the galv holes in mine I went for 12mm so about the same as yours and it worked lovely
It's got a good base to become a great landy
My SII LWB was too rusted to repair. Fortunate to afford a new galvie chassis with a removable box cross member. Interesting to note the differences between a SII LWB and a SIIa LWB.
Excellent!
Lovely job max
Well horatis,we got our Captain Nemo,s and their draughts
Nice work mate looking good
Kermit is going to be mint!
nice job. iI have enjoyed watching the progress
brilliant vid as ever
I reckon you should get a tooth galvanised to match. Great Video Max.
Another great video
Lekker Max wish mine can soon get the same treatment
Shiney.
woohoo!! i was wondering when the next instalment was gonna materialise.
fill the internals with wax oil job done
Great work, please don’t let it end up in the undergrowth lol.
Hope the bulkhead isn't twisted after galvanising, will be fun trying to get it to fit.
Time to get the axle's back under it, a rolling chassis is much easier to deal with.
@maximusironthumper
2 жыл бұрын
Yep!
A really interesting video. I have a galvanised chassis in my Defender 90, but I bought a new one as a replacement. Certainly you did it the cost effective way and with the bulkhead and frames maximised the cost benefit. I am still wondering if they should be painted or just left as it is ? Mine already has the body on. I still have some small things to do to the bulkhead. I hope you get yours put together this summer. Best of luck. Thanks for the video.
As always a pleasure to watch, will you be painting it ?
Hiya Max
I drove my 61 lwb landrover with my trailer behind over the Severn bridge from Chepstow on the M4 back in March. Stayed on the motorway for about 30 miles, it was quite windy and the concentration levels were quite high! I had a 1946 knucklehead Harley in the trailer, and it was a relief to turn off and revert to old A roads. The galv dip must put a few stone on the overall weight?
I took pleasure watching the ‘old girl’ transporting the parts to Wales. Great job mate. Let’s see how you go with the next stage. I think you must have a bit of German ancestry seeing as how you like precision in your work. 👍🏻🙏🦘
Not long now before it's all back together and riding off into the sunset, assuming the inflating diesel prices haven't forced such things off the road that is... :P
@spungletrumpet
2 жыл бұрын
If diesel gets too expensive, he can always convert it to electric. ;)
@twocvbloke
2 жыл бұрын
@@spungletrumpet Which hedge is he hiding that conversion in then? :P
Another milestone completed. Are you going to paint over the galvanizing?
3:18 > A je to!
Looks like a "Proper job". :-)
after its weathered, will you be painting over the galv ? so was it max, or the landy, furtherest out of its comfort zone on a motorway... keep them episodes coming young man !
Do you have an endoscope to have a nose inside? Always wondered how well they get coated.
I love the sand blasting compressor. It blow so much smoke out of the exhaust but none of it from the correct hole. Is there a rats nest in the silencer or something?
@maximusironthumper
2 жыл бұрын
I suspect there's just not much smoke left by the time it gets to the end.
@Nikel87
2 жыл бұрын
@@maximusironthumper So that must mean that it is very eco friendly. No bad smoke out the pipe. =)
@3:28 Would you kindly leave aside that euro pallet for me, I can get a lot of kindling out of one of them with 39 year old chain saw...
You swapped ends when leveling The bubble in your level may not be perfect. It pays to end for end you level on and surface or two points to check if it's accurate. The bubbles are glued into the aluminium and can be reset . I clamp my levels to a known flat or plumb surface and hot glue the bubbles to in-between the lines.
Seemed a bit of an epic voyage to the galvanizer’s place and back again. How far away did the borrowed template chassis travel from..? It is Somerset where you are isn’t it? My mum lives in a little place called Williton - is that far from you? 👍🏻
4mm out? It was probably more than that fresh out of the lr factory.
Fantastic, when is the OM605 going in?
i got my 110 chassis galvanised and didnt drill an single extra hole ? and it was a mint 1989 x army clean as a whistle leeds galvanising if anyone wants to know were i got mine done 5 years on still spot on
will you also paint it with bitumen? i live in Canada and have never heard of bitumen protection outside of your channel.
Thanks for sharing. How about the rust inside the chassis rails? Do you think, your galvaniser left the chassis long enough in the stain? May I ask, how much it costs to get all that stuff zinc coated again.
@maximusironthumper
Жыл бұрын
As shown is an earlier episode I cut sections out to allow me to gritblast inside the whole of the chassis. It cost £600ish to dip, can't remember the exact price, but it's mentioned in the video.
@HeinerStorchennest1
Жыл бұрын
@@maximusironthumper Hi and thanks a lot. You give me an idea about the costs of galvanising a chassis and helps to decide, welding and galvanising or buying a galvaniced chassis from Richard's. Heinz, Germany
It hurts my eyes and brain. This must be the shinniest thing you own. Get some oxidised aluminium panels bolted to it ASAP
As a matter of interest Maximus, how many pounds or kilos of zinc were used?
@maximusironthumper
Жыл бұрын
I've checked back on the invoice - they didn't tell me!
Take a look at LOOK MUM NO COMPUTER 👍👍🇬🇧🇬🇧
Landrovers are fantastic, if you have an engineering degree, a garage full of tools, and love getting covered in oil and rust
@highdownmartin
2 жыл бұрын
You really don’t need an engineering degree. But the rest is very true.
@matthewayres9393
2 жыл бұрын
And you don’t need lots of tools, just a set of imperial spanners and a range of hammer sizes
sounds very cheap to me but looks a good job
You didn't get pulled for no number plate on the trailer then.
Understand the rust was a very serious problem for these English vehicles. Do the new ones have galvanized chassis?
@maximusironthumper
Жыл бұрын
I don't think even the last Defenders ever got galvanised chassis from new.
Odd question but what boots are those been trying to find a decent boot forever lol
How long for the rebuild Max!?
I am probably imagining it but was that you talking to James O'Brien on LBC a couple of weeks ago???
@maximusironthumper
2 жыл бұрын
Nope not me!
any idea on release of part 18? Thanks
I know you care about the environment, but I do worry about sand blasting with old glass with no system to capture the waste.
Would you mind sharing the drill locations for the galvanisation ports/vents? I am planning to do this later this year and cannot find any information on proper drilling locations. Thank you. I look forward to your next update on this project.
@maximusironthumper
Жыл бұрын
Not an easy task! We made no notes, just copied over each hole from one chassis to the other. I'll try to sort something out, I'll have a ponder and get back to you.
@maximusironthumper
Жыл бұрын
Hello again, I've now made maps of all the holes and taken lots of hi-res reference photos. Keep an eye on my website and I'll post them all there shortly.
@eclifton4070
Жыл бұрын
@@maximusironthumper Thank you so much for taking the time. I really appreciate it. I do look forward to seeing progress. Blessings!
@maximusironthumper
Жыл бұрын
@@eclifton4070 No worries! It's up now. maximusironthumper.co.uk/index.php/project-kermit-technical-archives/
@eclifton4070
Жыл бұрын
@@maximusironthumper Perfect! Much appreciated.