Thanks for the links. Cheaper ammo than I was able to find anywhere else.

Your video is very helpful

Loved learning how to tie the pouches on.

This is a fooking genious idea,it's perfect size for a kid to use an quickly put in you're pocket if you go camping or the beach so you have something to do and not be bored

Great video, thank you. I appreciate you walking through each step.

Very good vídeo

These are cool, I've been making them for a few years now too but I only sell to friends and co-workers. Thanks for the video though!

You inspired me and my brother to make those, love the fig 8. Thanks you for all that you do

just got mine in the mail, so f***ing clean. now easily part of my edc, and quite the conversation peace. im relatively new to slingshots and im already hitting bottles with this thing. so satisfied

Great video! I ordered one from your Etsy store yesterday and stumbled upon this video today. Great seeing the behind the scenes.

@TheSmoShow1

2 жыл бұрын

Heck yea!! Thanks so much, that will likely be in the mail Thursday, the 30th!!

Thank you my friend 😊

Lol, was looking into how these are made and apparently, i just bought one from you off ebay!

Loved the video! Ordered the gold one!

@TheSmoShow1

2 жыл бұрын

that'll get sent out Monday when I get back from the Southeast Slingshot Tournament!!

Must be Karma, or big brother spying on me, lol.....but after buying 6 of these descenders yesterday, this video pops up in my recommend feed. Great job on these and I love the tip of leaving a cap with the tubing to cover the fork ends. I make mostly natural tree fork slings, but gotta give these a go

@TheSmoShow1

4 жыл бұрын

Let me know how it goes! These are so simple and pocketable, I take one everywhere I go!

@darrellallen7931

4 жыл бұрын

The Smo Show l wanted to let you know I came up with a simple ad pie jig to hold these descenders which allows cutting across both forks at once, and perfectly even. Get a 1x4 pine board about 4" longer than the descender. Lay the descender flat on the board, but with the end you're cutting off hanging over the end of the board. Holding the descender firmly and flat, trace the outline shape of it onto the board, then cut that shape out with a jigsaw or scroll saw, etc.,but just "inside" your line. You want a snug enough fit to where you can lay the board flat on a table and push the descender into the cutout and flat against the table, and have it snug enough it stays in place when you pick up the board. Then, just clamp the board in a vise horizontally, clamp it and cut across both tips at the same time with a hack saw.....clean and quick. Hope that helps. BTW, love that green one, would love to know where you got it, or a link / URL if you have it ? Also, are you on the Slingshot Forum ? Lot of great guys and gals on there that love anything and everything sling related.

@TheSmoShow1

3 жыл бұрын

I'll check it out!

Good video thanks for the step by step I have several of the decenders and I want to try to make a slingbow using a wiskerbiscuit

@TheSmoShow1

4 жыл бұрын

Please let me see that when you do it!! I would love that.

Do you still make them for sale ?

great

I heard somewhere that blue anodisation is actually the hardest color, it will resist scratches better.

@TheSmoShow1

3 жыл бұрын

I did not know that!!

You take a long time that is fast and hot, you do a lot of faramalla

l mean those metal handles!

@TheSmoShow1

2 жыл бұрын

They're figure 8 Descenders. Check the Description for a link!!

hey stop wasting hand sanitizer were in a crisis lmao! good video made one love it

@s7121n9s

2 жыл бұрын

Rubbing alcohol works well since it evaporates quickly

🇲🇾 good job bro👍👍👍

@TheSmoShow1

3 жыл бұрын

Thanks!!

What is ur band size?

Que presio tienen

How many inches on the fork gap? Thanks

Добрый день а можно узнать сколько такая рогатка готовая стоит

What are the names af these clips?

What is the lenght cut of the black tubing?

@TheSmoShow1

2 жыл бұрын

about 2 inches

Ok

Where are these clips found?

@amirrezaozami5544

2 жыл бұрын

thanks a lot

Saw these for 40$ online took me 5 minutes to realize it only takes not even 10$ to make

What are the size of the bands you cut?

@TheSmoShow1

3 жыл бұрын

Typically I use somewhere between .6 and .8 (depending on my ammo) and cut tapers from 25-19 with an active length of 17cm.

@everperez8538

3 жыл бұрын

@@TheSmoShow1 thank you so much. I really enjoy your videos. Motivated me to make a figure 8 slingshot. Just gotta perfect the bands.

How much are they I would like to buy one

@TheSmoShow1

3 жыл бұрын

Etsy.com/shop/SmosSlings you can purchase from me there.. or follow the links in the description to make your own!

Buatin gua dong

your etsy page doesnt show up

@TheSmoShow1

4 жыл бұрын

Check out this item in my Etsy shop www.etsy.com/listing/760844348/slingshot Thanks for the heads up!!

No way in hell can I get the latex tubing over the fork tips, and I'm using the same stuff you are: Spearit #804 3/8"ODx1/4"ID. My fork tip diameter is 1/2". I'm reverting to my own method of wrapping the forks with 3/4"x3/8 band sets, which works pretty well, but I'll admit your tube method is a better alternative, if you can make it work...which I can't.

@TheSmoShow1

3 жыл бұрын

You have to get a good amount of the hand sanitizer in the tube and on the fork tip, and work it on there. Sorry I can't be more detailed. I guess after making over 100 of them it's second nature for me..

@FTA4evr

3 жыл бұрын

@@TheSmoShow1 I keep watching your video and will go back and try again, with plenty of goop applied. I'm looking for slightly larger tubing now, but it's hard to come by in relatively small quantities. Oh, well, it gives me something to shoot for. You're the man!

@AccordionSqueezer

3 жыл бұрын

Try heat shrink tube

@FTA4evr

3 жыл бұрын

@@AccordionSqueezer I use x-flock heat shrink tube on slingshots, but the latex tubing idea seemed like a simple and elegant way of doing things. I'll try a slightly larger ID tubing.

Be safe sir, never remove the wheel guard of the grinder 😊

Love your videos bro but if your making these a lot for your shop please tell me your wearing a mask 😅. That shit will swiss cheese your lungs over time.

@TheSmoShow1

3 жыл бұрын

Yes I typically wear protective gear and I usually make 5-10 at a time, instead of just 1.

Megostotovideo

Or don’t cut it and convert it into a sling bow as well

@TheSmoShow1

3 жыл бұрын

I've thought about attaching a whisker biscuit!!

@janstewart2041

3 жыл бұрын

Would be cool to see a video on that