This video is being used with full permission of Marantec.
Жүктеу.....
Пікірлер: 35
@seefair5 ай бұрын
For the first time in my life, I can say that time on youtube was well spent. Outstanding tutorial!
@jackiedaytona85653 жыл бұрын
Finally a video that made reprogramming our unit super easy. Clear, step by step instructions with video accompanying. You're a lifesaver, thank you!
@richardsharpe58783 жыл бұрын
You are awesome. I bought a house and there were no remotes. I was able to program the new remotes easily. Thanks
@madaboutmelts7 жыл бұрын
Thank you so much for this. I needed to program a remote for our door, and this explained how perfectly.
@spynetp6 жыл бұрын
Thank you so much I tried so many different videos this is the best total lifesaver
@garagedoorgenius6 жыл бұрын
Nice job explaining!!
@lailiag50404 жыл бұрын
I love this video, I have this unit and nice to get educated from this. I have a question, would this work with Chamberlain MYQ-G0301. I have been trying to see any smart opener for this X70 that I have.
@Letmein4446 жыл бұрын
Do these garage door openers work with all-star transmitters? Just got a house and the previous owners left a garage door remote that doesn't work. I think they took the transmitter that belonged to the garage owner at the house. Complete noob at this, need info. Thanks.
@akroc71195 жыл бұрын
What about programming the code for the keypad?
@YuusufAkorede7 жыл бұрын
Thank you so much life saver
@RS-dc7wy3 жыл бұрын
It worked. Thank you
@ronmeade36503 жыл бұрын
I would like to have another remote for a second vehicle...can I reprogram the universal remote and original remote to have both operational ?
@dlander19773 жыл бұрын
hi do i need to go through all 3 steps? what if i do not need to reprogram my remote, can I just exit programming mode after the first 2 steps?
@andrewcuellar66492 жыл бұрын
What if after I do the programming for setting it upwards I hit p and then instead of the bottom three lighting up the number 7 lights up and blinks instead
@denisealaniz5763
Жыл бұрын
Having the same problem. Did you ever get yours fixed?
@edgarxuereb26134 жыл бұрын
How can i extend the light duration while i open and close the door plesae?
@zimmers2 жыл бұрын
Hey is it possible to make this thing work with a relay?
@barakabarnes56016 жыл бұрын
how do you know which freq you need? I need a replacement remote but don't know which one to get. please help
@ddd72
3 жыл бұрын
Marantec 2 Button Remotes / 3 Count in Package by Marantec www.amazon.com/dp/B01MT0AY2Q/ref=cm_sw_r_cp_api_fabc_I5PYFbTCXV3B9?_encoding=UTF8&psc=1
@cal_ng Жыл бұрын
How do I change the speed limit?
@carriganmargaret35892 жыл бұрын
anyone know how to do this with a chamberlain universal remote
@joshi6663 жыл бұрын
Hallo, thank you for the video. My unit is behaving weird after a blackout. When entering the EOS mode, I can set the OPEN position as shown in the video. But when confirming with the P button, the lights 4.5.6 won’t turn on to let me program the CLOsE position. Instead, the lights 8,2 are on. If I press the (-) button, the door closes fully without me being able to adjust it. I did a reset but the behavior is the same after the reset. Is there a trick or is my device defective?
@nicknield
2 жыл бұрын
Mine is doing the same thing. Did you ever get an answer?
@joshi666
2 жыл бұрын
@@nicknield I solved the problem. The issue with mine was a missing switch cam on the Belt. It is a small metal wedge that is attached to the belt. It travels behind the unit when pulling up and presses a button behind the motor that indicates that the door is in the up position. Apparently mine fell off and I had to purchase a new one.
@barbarascroggins40315 жыл бұрын
Thank you for these steps. Everything does exactly as you've shown, except the door continues to open too far. Past the limit I've set. Therefore, the door creates an error and won't close ?????
@barbarascroggins4031
4 жыл бұрын
Can you help me with this error? After following all the steps, the opener will pull the door all the way back to the unit and then create an error. While it is opening, it is also traveling very slow for more than half the distance from close. Any ideas?
@vittorioperria300
4 жыл бұрын
@@barbarascroggins4031 Hello I have the same concern that you have managed to find the problem how to fix! sorry translation French / English
@aryanax
4 жыл бұрын
I have the same issue, the motor slows down in the spot I set, when opening, but does not stops
@aminedak
4 жыл бұрын
Me too i have the same issue
@angelaboese3982
4 жыл бұрын
Same issue. Did you figure out the solution?
@khav112 жыл бұрын
seems complicated just for a damn garage door!
@jameswilson42104 жыл бұрын
Not working
@thegrimmer3 жыл бұрын
Holding the p button for me just lights up two and six. This is idiotic
@delvitor Жыл бұрын
vamos a ver, habla español, que tu eres hispana, se te nota por lo guapa que eres ;-P
@JJ-nu8qi Жыл бұрын
These are straight dog doo garage door openers. Ill make sure i dont get this brand ever again.
Пікірлер: 35
For the first time in my life, I can say that time on youtube was well spent. Outstanding tutorial!
Finally a video that made reprogramming our unit super easy. Clear, step by step instructions with video accompanying. You're a lifesaver, thank you!
You are awesome. I bought a house and there were no remotes. I was able to program the new remotes easily. Thanks
Thank you so much for this. I needed to program a remote for our door, and this explained how perfectly.
Thank you so much I tried so many different videos this is the best total lifesaver
Nice job explaining!!
I love this video, I have this unit and nice to get educated from this. I have a question, would this work with Chamberlain MYQ-G0301. I have been trying to see any smart opener for this X70 that I have.
Do these garage door openers work with all-star transmitters? Just got a house and the previous owners left a garage door remote that doesn't work. I think they took the transmitter that belonged to the garage owner at the house. Complete noob at this, need info. Thanks.
What about programming the code for the keypad?
Thank you so much life saver
It worked. Thank you
I would like to have another remote for a second vehicle...can I reprogram the universal remote and original remote to have both operational ?
hi do i need to go through all 3 steps? what if i do not need to reprogram my remote, can I just exit programming mode after the first 2 steps?
What if after I do the programming for setting it upwards I hit p and then instead of the bottom three lighting up the number 7 lights up and blinks instead
@denisealaniz5763
Жыл бұрын
Having the same problem. Did you ever get yours fixed?
How can i extend the light duration while i open and close the door plesae?
Hey is it possible to make this thing work with a relay?
how do you know which freq you need? I need a replacement remote but don't know which one to get. please help
@ddd72
3 жыл бұрын
Marantec 2 Button Remotes / 3 Count in Package by Marantec www.amazon.com/dp/B01MT0AY2Q/ref=cm_sw_r_cp_api_fabc_I5PYFbTCXV3B9?_encoding=UTF8&psc=1
How do I change the speed limit?
anyone know how to do this with a chamberlain universal remote
Hallo, thank you for the video. My unit is behaving weird after a blackout. When entering the EOS mode, I can set the OPEN position as shown in the video. But when confirming with the P button, the lights 4.5.6 won’t turn on to let me program the CLOsE position. Instead, the lights 8,2 are on. If I press the (-) button, the door closes fully without me being able to adjust it. I did a reset but the behavior is the same after the reset. Is there a trick or is my device defective?
@nicknield
2 жыл бұрын
Mine is doing the same thing. Did you ever get an answer?
@joshi666
2 жыл бұрын
@@nicknield I solved the problem. The issue with mine was a missing switch cam on the Belt. It is a small metal wedge that is attached to the belt. It travels behind the unit when pulling up and presses a button behind the motor that indicates that the door is in the up position. Apparently mine fell off and I had to purchase a new one.
Thank you for these steps. Everything does exactly as you've shown, except the door continues to open too far. Past the limit I've set. Therefore, the door creates an error and won't close ?????
@barbarascroggins4031
4 жыл бұрын
Can you help me with this error? After following all the steps, the opener will pull the door all the way back to the unit and then create an error. While it is opening, it is also traveling very slow for more than half the distance from close. Any ideas?
@vittorioperria300
4 жыл бұрын
@@barbarascroggins4031 Hello I have the same concern that you have managed to find the problem how to fix! sorry translation French / English
@aryanax
4 жыл бұрын
I have the same issue, the motor slows down in the spot I set, when opening, but does not stops
@aminedak
4 жыл бұрын
Me too i have the same issue
@angelaboese3982
4 жыл бұрын
Same issue. Did you figure out the solution?
seems complicated just for a damn garage door!
Not working
Holding the p button for me just lights up two and six. This is idiotic
vamos a ver, habla español, que tu eres hispana, se te nota por lo guapa que eres ;-P
These are straight dog doo garage door openers. Ill make sure i dont get this brand ever again.