Pro Guitar Tech's Most LOVED Things (and how to use them)

Музыка

Links to Ben's Favorite Tools:
Capo (affiliate link)
sweetwater.sjv.io/c/2330848/9...
Soldering Iron (affiliate link)
amzn.to/47WhhRM
Deoxit D5 (affiliate link)
amzn.to/47WUl4Y
Deoxit Fader Lube (affiliate link)
amzn.to/3PlNTNL
Toothpicks (affiliate link)
amzn.to/44xJ88c
Wood Glue (affiliate link)
amzn.to/3R5pFbU
Razor Blades (affiliate link)
amzn.to/3YYeuDM
Lighter Fluid a.k.a Naptha (affiliate link) USE AT YOUR OWN RISK
amzn.to/45Vearu
------------
SIGN UP FOR THE INNER CIRCLE HERE:
rhettshullguitarcourses.com/p...
MY VIDEO COURSES:
Cowboy Chords Breakout Course
rhettshullguitarcourses.com/p...
Pentatonic Breakout Course
rhettshullguitarcourses.com/p...
Fretboard Fundamentals Slide Guitar
rhettshullguitarcourses.com/p...
Chords and Rhythm Course
rhettshullguitarcourses.com/p...
Fretboard Fundamentals
rhettshullguitarcourses.com/p/ff
The Complete Nashville Number System video course
rhettshullguitarcourses.com/p...
The Tone Course
rhettshullguitarcourses.com/p...
0:00 Intro
0:25 Capo
3:00 Soldering Iron
3:37 Deoxit D5
4:44 Toothpicks
6:25 Razor Blade Trick
9:56 Lighter Fluid (yes, really)
11:59 Wrap Up

Пікірлер: 514

  • @TulioG
    @TulioG9 ай бұрын

    Jimi Hendrix also used zippo on his guitar once..

  • @rayross997

    @rayross997

    9 ай бұрын

    He used zippo to blaze the way.

  • @KevinMerinoCreations

    @KevinMerinoCreations

    9 ай бұрын

    🤣

  • @goswo

    @goswo

    9 ай бұрын

    😂😂😂

  • @sparkyguitar0058

    @sparkyguitar0058

    9 ай бұрын

    And we seen how well that worked out. I use rubbing alcohol instead.

  • @caiusmadison2996

    @caiusmadison2996

    9 ай бұрын

    ​@@goswocleaned the finish right off that guitar lol

  • @DaveTriesToPlayGuitar
    @DaveTriesToPlayGuitar9 ай бұрын

    We need to have weekly or monthly "guitar tech tips with Ben" segment. These tips are so helpful specially to everyone that has no chance of going to a tech or just doesnt have the funds to send their guitar o a guitar tech

  • @peghead

    @peghead

    9 ай бұрын

    I'm a Strat owner, and often I see Strats with 'over-torqued' pickguard screws, to the point that the screwheads are dimpling the guard, it's not only unsightly, but can lead to cracking the edge of the guard, I NEVER use a powered screw driver on pick guard or Tremolo/vibrato cover screws, I'm just not in that much of a hurry. P.S., I'm commenting on your comment because my computer won't allow me to post my own (it does that every now and then).

  • @KevinMerinoCreations
    @KevinMerinoCreations9 ай бұрын

    This is a great segment for those of us who are hobbyist musicians and want to try to do a better job of taking care of our instruments. 👏👏👏

  • @collisw8302

    @collisw8302

    9 ай бұрын

    Big time, I've been playing a long time but doing my own setups has always been daunting.

  • @aresdesiderata8959

    @aresdesiderata8959

    3 ай бұрын

    It's great for anyone who takes guitar and music seriously.

  • @edwardboot3431
    @edwardboot34319 ай бұрын

    ... Ben needs his own KZread channel, what a great, easy to understand, and knowledgeable guitar tech. I could listen to this dude share tips all day long. His vast knowledge and simple maintenance tips remind me of Dan Erlewine.

  • @livewire4495
    @livewire44959 ай бұрын

    An old Carpenter told me about Lighter fluid in 1968. He had a can in his tool carrier and I asked Him why. He explained what a good finished surface cleaner it was. I went home and tried it on the Finger board on my Strat and was sold. I mentioned it to my Dad and he showed me that he also carried a can in his tool box. All the Old-timers Knew about it, even my Mother. Asking Questions and being Curious has served me well over my Lifetime. People have always responded enthusiastically and seemed eager to Share. Love the content! 😎

  • @DerekBolli

    @DerekBolli

    9 ай бұрын

    Just be careful that you don't do a Jimi Hendrix 🙂🔥🎸

  • @deputyrock3489

    @deputyrock3489

    9 ай бұрын

    Lighter fluid = naptha. Lighter fluid is about $0.85/fl. oz. Naptha is about $0.18/fl. oz. Don't buy lighter fluid. Buy naptha.

  • @bobbrossify

    @bobbrossify

    9 ай бұрын

    We use zippo fluid in plastic model making. Stuff has a billion uses.

  • @hoilst265

    @hoilst265

    9 ай бұрын

    @@deputyrock3489 Yeah, and it'll come in a 1l bottle, too. It's what they sometimes use as dry-cleaning fluid. Dissolves a bunch of stuff, then evaporates instantly. Of course, it's dangerous as hell, which is why a lot of cleaners go up in flames.

  • @tysonkonken-jj3vd

    @tysonkonken-jj3vd

    9 ай бұрын

    Jesus man, what did that guitar EVER do to you.

  • @officialWWM
    @officialWWM9 ай бұрын

    There is a tool designed to do exactly what you are doing with that razor blade. We use it in the auto painting industry. It’s a tungsten block and we use them for scraping off runs in the clear coat. They will literally last forever!

  • @everythingbobbywolfe

    @everythingbobbywolfe

    23 күн бұрын

    Do you have to sharpen them periodically like cabinet scrapers?

  • @stuartp8658
    @stuartp86589 ай бұрын

    For any Australians, Naptha is Shellite here. It is amazingly useful!!!

  • @lewisllewellyn1263
    @lewisllewellyn12639 ай бұрын

    We need a 10 hour video with Ben.

  • @muranyimate-zene2602
    @muranyimate-zene26029 ай бұрын

    10:36 polishing, polishing, polishing 😂 Loved the @twoodfrd reference.

  • @pwman

    @pwman

    9 ай бұрын

    I was gonna say that… we have a Ted fan!!

  • @andrewbecker3700
    @andrewbecker37009 ай бұрын

    I just use toothpicks to spread superglue globs. They work like miniature paint brushes if you smash the tips flat. I really liked this segment because he wasn't trying to sell you any specialized expensive tools only available from big name suppliers. 90% percent of luthier tools are not specifically for guitars.

  • @Healcraft

    @Healcraft

    9 ай бұрын

    yeah it only get expensive when you need precision and quality tools for nuts / fret leveling etc, but even then just taking an extra long time with skill u can get away with less, but i wouldnt recommend it

  • @solaris70

    @solaris70

    8 ай бұрын

    what are luthier tools for ?

  • @user-lv7ph7hs7l

    @user-lv7ph7hs7l

    5 ай бұрын

    Use dispenser tips, much better, never dries out and super cheap. 100 cost a few bucks and that will last most professionals a decade, so for home use, spend those 3 bucks and dispeslnse superglue accurately. You will make up for it by no longer wasting glue so it pays for itself in one bottle of glue. And no need for a cap. If it dries out snip off a cm or so and replace once you snipped the whole tip.

  • @AlpineJennings
    @AlpineJennings9 ай бұрын

    Rhett! Crazy as it may sound, these two videos are among if the most valuable content you’ve ever created. Thank you! So grateful for you!

  • @edhornby4885
    @edhornby48859 ай бұрын

    Lighter fluid is great for cleaning strings and will add life to bass strings which is great for that bass that sits in the corner and comes out on random occasions 😁

  • @Jimjolnir

    @Jimjolnir

    2 ай бұрын

    I'm gonna have to give that a try!

  • @wildpinesmusic4581
    @wildpinesmusic45819 ай бұрын

    Great tips! As someone who’s been getting more into the tech side of guitar it’s nice to hear how different people approach upkeep and repair

  • @maxo-mat581
    @maxo-mat5819 ай бұрын

    Really great and helpful information! Thanks for the Video, Rhett. I could watch Ben all day showing how things are done properly.

  • @Magik1369
    @Magik13694 ай бұрын

    Cool video. Enjoyed these guitar tech videos. Lots of gems and practical advice. Excellent!

  • @JoelBryant1960
    @JoelBryant19609 ай бұрын

    I absolutely love these Ben videos. I just cleaned up some junk off of the finish of my 79 Strat that had been bugging me for years. I was too afraid to use solvents on it before. Zippo to the rescue. Thank you and Ben for these tips. Love to have regular little tips and tricks from you and Ben on guitar fixes and maintenance 🎸❤️

  • @callycat23
    @callycat239 ай бұрын

    As a fellow full time luthier/tech my one advice for Ben regarding power tools for guitar purposes is to go to Ikea and buy the electric screwdriver they offer! Plenty enough power for most simple tasks in our trade i.e. neckbolts, pickguard screws, tuning keys, etc. but have a 15 speed governor that makes it invaluable. Can screw down pickguard screws without fear of breaking the guard due to too much torque.

  • @forestgreenman
    @forestgreenman9 ай бұрын

    Cool Video! Can you do one with Ben that shows exactly his entire procedure for tuning and intonation? Sounds like he does a much more in depth job than I do and it is always great to see someone of his caliber showing his methods. Thanks again for a great video!

  • @abigailsnyder9251
    @abigailsnyder92519 ай бұрын

    I am loving Rhett’s channel these days! Almost feels like there’s been a refresh with the gear series and I couldn’t be happier. Thanks Rhett!

  • @tostrmofo6686
    @tostrmofo66869 ай бұрын

    That's so great. I'm working on my own guitars for over 10 years now and I'm always using that stuff all the time. Lighter fluid to clean alsmost everything, especially the fretboard, toothpicks for the strap pins (I use the glue method) deoxit for the pots. Only thing I don't use is razor blades, but I also don't work on the finish besides relicing a guitar from time to time. I have uses razor blades for that before, but only to remove material. This is great that a pro also likes to use that inexpensive stuff, that get's the job done really well.

  • @bravotronalpha3787
    @bravotronalpha37879 ай бұрын

    Awesome video. This guy's got some serious knowledge. I knew a few of these but didn't know the super glue trick for filling in dings. A must-try in the future for sure!

  • @mark.guitar
    @mark.guitar9 ай бұрын

    Servisol super 10 is as good as "Dioxit" over here in the UK. Rather than razor blades I use Stanley knife blades coz' they last way longer and I have a box of 1000 in the workshop! The superglue guitar string tip is new to me and I was a shop repairer (using expensive nozzles). Superb video.

  • @xbreakfastcorex
    @xbreakfastcorex4 ай бұрын

    Clicked in to leave this tab open for later, immediately saw the Mills shirt, subcribing now as a result. Nice job.

  • @DamonBates
    @DamonBates9 ай бұрын

    Absolutely brilliant Rhett. Love the Zippo trick tx so much

  • @Cigarsnguitars
    @Cigarsnguitars9 ай бұрын

    Always great to see what others do on their workbench. Sometimes you pick up a new trick or a different use for an old tool. 😎🤘

  • @mariamignone1530
    @mariamignone15309 ай бұрын

    Thank you guys. I’ve been doing my own maintenance for 45 years and I learned so many new tricks and tip. I was just getting ready to clean and restring my les paul custom and my Gibson wm45 acoustic. So from an old fart I sincerely appreciate it. John

  • @doknox
    @doknox9 ай бұрын

    As a tech/luthier this is 100% accurate! The first one is a bonus for me though. Never thought of that. I always just used some painters tape to hold the strings in place. Thnx👍

  • @Rockin_Rocco
    @Rockin_Rocco9 ай бұрын

    ben is the best! was there this morning. i bought a 1986 RAT pedal from them, but the jack was old and was messed up, took it back and he fixed it in 5 mins!

  • @richardchristensen1768
    @richardchristensen17689 ай бұрын

    Been watching vids on these guys for a while and as a GC tech in Alpharetta I did meet Ben once when he came in to our store and he was very polite to me and I knew he worked at RG in Roswell So now I've been catching these recent vids on the loves & hates And have to say I feel very validated because these techniques are the near exact spot on methods that I practice on my own and customers guitars everyday Ben as I've heard and seen is well respected for his skills I haven't ever worked a plek machine as leveling is by me done the old fashioned way Ben can do either Im know! Oh yes btw the "Luthier" string knots I have to deal with drive me nuts too!!!! Hate them!! Great series and very informative! 👍

  • @sammacdonald6382
    @sammacdonald63829 ай бұрын

    Always a good episode when Ben is on it!

  • @thebelasarius
    @thebelasarius9 ай бұрын

    This was so awesome and relaxing to watch

  • @HayesR.J.
    @HayesR.J.9 ай бұрын

    GREATEST DIY VIDEO ON THE TUBE! Thanks for this Rhett!

  • @leefradkin9077
    @leefradkin90779 ай бұрын

    what kind of toothpick? I don’t want to alter my tonewood…

  • @KeyMusicCenter

    @KeyMusicCenter

    9 ай бұрын

    Now that's funny 😂

  • @WhatJeanWants

    @WhatJeanWants

    9 ай бұрын

    Use the minty ones as they will actually enhance your tonewood!

  • @fmh357
    @fmh3579 ай бұрын

    Wow, I've learned a heap about taking care of your guitar watching your channel. Thanks so much.

  • @HankHopeless
    @HankHopeless9 ай бұрын

    A most excellent video, and really useful for everybody from beginners to pro. There was even something for Me : the capo trick, which seems extremely useful !

  • @traceyoungs1637
    @traceyoungs16379 ай бұрын

    That was a lot of great information in a very short time- excellent!

  • @DrejcD
    @DrejcD9 ай бұрын

    I love this guy, his calm energy. ❤

  • @jannetunturi
    @jannetunturi9 ай бұрын

    Love these kind of videos. Plus I got my own intuition a validation on the toothpicks. Did not have previous information about it, but used the idea on a couple of guitars.

  • @chrisbowie1994
    @chrisbowie19945 ай бұрын

    the trick with the capo is gunna come in clutch with my AV2 tele and strat when I need to make adjustments. thanks for that!

  • @Barnesjc13
    @Barnesjc139 ай бұрын

    I use a ALL of these as well at my shop in LaGrange, Ga. Great video!

  • @timothysprinkle3052
    @timothysprinkle30529 ай бұрын

    I really enjoyed this video. Very informative! Going to get some of these items.

  • @skullndguns
    @skullndguns9 ай бұрын

    Great tips and explanation of the spotrepair, got some guitars to try that out on. I'd like to add that Instead of independent tools you could get a multitool from Ibanez, high quality tools, small size and adequate for on the road repairs and in addition a string cutter/winder from d' addario for exapmle.

  • @GC-ji3ye
    @GC-ji3ye6 ай бұрын

    The super glue drop fill tips were great! Thank you!

  • @markwsanders
    @markwsanders9 ай бұрын

    So glad to see Ben back lm the channel.

  • @JeremyLeech
    @JeremyLeech9 ай бұрын

    More guitar tech videos like this. I love them. Also shoutout to Ben!

  • @joekruger8033
    @joekruger80339 ай бұрын

    I agree with everything that was discussed and I’m sure there were a lot of takeaways for many. The only no no that was done is the use of power tools; one slip and you’re screwed. Plus if the clutch is improperly set you will strip the screw, damage the head and maybe even break it off!

  • @msspi764

    @msspi764

    9 ай бұрын

    agreed. You need to be a jedi power tool person, be one with the tool, to do what he does. If you think you are, you probably aren't. Get a very complete set of hand tools. Nothing fancy, you can get almost everything at Harbor Freight or down in your grandfather's basement workshop.

  • @valuedhumanoid6574

    @valuedhumanoid6574

    9 ай бұрын

    I don't have an issue with power tools, they're using the wrong kinds. A DeWalt cordless drill motor that you build a deck with is not the right tool for luthier work. I have a Bosch power screwdriver that works wonders. It's designed for highly detailed work and have electronic chips that control the torque and speed. You cannot make it strip a screw hardly. It's not just a clutch. It senses when the screws are nearing full depth and adjust the power so it doesn't strip. But they're a little expensive. And using a regular screwdriver on the 4 neck bolts when you have to remove the neck several times would drive you nuts. Your wrist would be sore as hell.

  • @bravotronalpha3787

    @bravotronalpha3787

    9 ай бұрын

    If using a power tool on a guitar, it's a good idea to have one with either an adjustable clutch or adjustable speed. That way you can lessen the risk of over-torquing any bolts or screws, as well as decreasing the likelihood of cross-threading or having the screw go in at a weird angle.

  • @MooCow2X2

    @MooCow2X2

    9 ай бұрын

    As a frequent power tool user. They’re great for taking out. And also good for cinching screws close to depth. But in situations like this. Final torque with a hand screwdriver is my preferred method. (Also. Those clutches have different levels of torque depending on how fast you’re going in my experience. Inertia in the chuck and what not)

  • @chrisandersen5635

    @chrisandersen5635

    9 ай бұрын

    I might also be worried about it slipping out of the screw and damaging the finish. Yikes. 😮

  • @zbrapunchr7821
    @zbrapunchr78219 ай бұрын

    Rhett, I’ve been watching your stuff for a while now but haven’t gotten around to subscribing until after this vid. I have really gotten into working on my guitars lately and this video for sure helped a lot! So today I become a sub! Thanks for all the awesome content man

  • @Mr-Foad
    @Mr-Foad9 ай бұрын

    great stuff, could watch this all day.

  • @garygratzer9670
    @garygratzer96709 ай бұрын

    On the neck adjustment with vintage neck but access, I neatly dremel a slot between the neck pickup rout and neck pocket that allows access to the truss rod screw without removing the neck. Just take the pickguard off and there you are. So handy and invisible with the guard back in place. One exception would be if the guitar was a valuable vintage guitar. Nice video!

  • @nickfox7756
    @nickfox77569 ай бұрын

    Ben explains his views very well and keeps everything extremely simple. I think working on your own guitar, has always looked complicated and dangerous and that keeps most guitar players-including myself- from trying this stuff out for themselves. He definitely makes things look like it’s no big deal. Can you do more videos with his tips and tricks? These two videos are super helpful

  • @per-arneleijon6906

    @per-arneleijon6906

    8 ай бұрын

    Det are à Tool to use to det the trustrod

  • @per-arneleijon6906

    @per-arneleijon6906

    8 ай бұрын

    There is no need to take of the neck there is a tool and you only have to take off the pickgard.

  • @chiparooo
    @chiparooo9 ай бұрын

    Great stuff! Thanks for sharing!

  • @CeeGee60
    @CeeGee609 ай бұрын

    Sometimes when changing over to locking strap buttons the supplied screws are smaller in diameter. Using a wooden match stick and tite bond glue fills the original hole nicely. In most cases using a tiny drill bit to create a starter hole makes for an easy install. Great video

  • @one0nine
    @one0nine9 ай бұрын

    Been using the toothpick solution for years (I always dip mine in wood glue) - it works perfectly. I'm really, REALLY enjoying these - I mean, how often do any of us have the opportunity to just sit and pick the brain of a pro guitar tech? This, and the one on "Things Ben Hates" (LOL) are extremely helpful, and Rhett, I'm very appreciative of you doing these!

  • @crazybobc1
    @crazybobc16 ай бұрын

    Great video! Thanks for the tips!

  • @balmain2496
    @balmain24969 ай бұрын

    Ben is a legend. I’d like to see him in more videos.

  • @u2cantsee
    @u2cantsee9 ай бұрын

    Outstanding segment. Great tech news.

  • @enricoalbor6588
    @enricoalbor65889 ай бұрын

    I’m using all these stuffs!!! And really, great; am doing every luthier works as diy projs(8-eg, 3-ag, 1-bg)!👍

  • @GRBAquatics
    @GRBAquatics9 ай бұрын

    Very Cool, Thankyou. So many useful tips. Awesome series. Cheers

  • @lmn0potts
    @lmn0potts9 ай бұрын

    #4 Billy Chapman did the same for my LP copy, toothpick and wood glue, I have not had to worry about my strap button for the past 20 years now.

  • @metallicaman7000
    @metallicaman70009 ай бұрын

    Pretty awesome video, more of that please

  • @towtracksoftware5963
    @towtracksoftware59639 ай бұрын

    Lighter Fluid!! Brilliant!! I never would have thought that would be safe for a finish.

  • @davidperezgonzalez1839
    @davidperezgonzalez18399 ай бұрын

    I use the zippo gas to clean the fretboard sometimes, and the bridge and the strings every time I play and strings can last months without any oxide, but they still sound less bright with time, and btw its more noticeable on the E A D strings, and I have less broken string on the bridge due to oxidization because my sweat is just radioactive man, so its a very nice thing to have to clean and preserve form oxide all the metal parts. Other cleaners are probably dangerous for guitar and for your health, and zippo gas is cheap too.

  • @randywollin5732
    @randywollin57329 ай бұрын

    Love listening to Ben give his tips. Sometimes though he assumes we know how to do things that we don't know how like in my case he assumed I would know how set set my intonation. I assure you I don't, but I've seen some things to help out.

  • @eerokkitube
    @eerokkitube7 ай бұрын

    On super rare occations you bumb into a video that actually saves you money, this happened just now😮 I had my strap button srew loose and I was about to bring the guitar to repair shop, now it is fixed! Thank you

  • @JR-lx8nn
    @JR-lx8nn5 ай бұрын

    Naptha. Great Stuff. I removed ball point ink from a lovely Martin D-28 with some Naptha. It did not disappear right away, but after several weeks, I suddenly realized it was gone, and all I used was Naptha as recommended by the Martin Guitar Factory rep. Saved my lovely guitar. Cleans off on its own and with a damp rag. JT

  • @kuakilyissombroguwi
    @kuakilyissombroguwi9 ай бұрын

    Priceless information, thanks for sharing!

  • @user-ck1fc7pc2c
    @user-ck1fc7pc2c8 ай бұрын

    Killer great tips, guys! Thank you!!!

  • @dchauser4
    @dchauser49 ай бұрын

    Big House is my favorite "if I hit the lottery" store in Atlanta. That Lemmy Marshall bass stack gets my attention every time, and they always have a good selection of vintage basses. I also appreciate the selection of vinyl they have in the shop, too.

  • @sonsrawk
    @sonsrawk9 ай бұрын

    Cool vid! Lighter fluid? That's a new one and makes perfect sense!

  • @Hasselblad9999
    @Hasselblad99999 ай бұрын

    Great video that will save me money, time and frustration. Thanks Rhett, well done. How about more on other guitarist needs like amps and acoustics?

  • @RalphMercuroMusic
    @RalphMercuroMusic9 ай бұрын

    Rock solid recommendations!!! Naphtha is a necessity for any DIY guitar player. In 2020 I bought a 79 LP Standard complete with 40+ years of gunky grime on the body and board. Naphtha stripped it all away with ease.

  • @JonDeth
    @JonDeth4 ай бұрын

    I have a bridge off in the other room with the strings capo'd, and another with a piece of velcro doing the same work. Super glue is also the finish repair's best friend. It's amazing how well it buffs to invisibility whether it's a lacquer or poly clear coat. I can do showroom finish quality work, but still find myself hack-smithing some projects for the sake of getting them done.

  • @FlorentJ17
    @FlorentJ179 ай бұрын

    Ben Calhoun is such a chad

  • @marcgv

    @marcgv

    9 ай бұрын

    He left the other store?

  • @FlorentJ17

    @FlorentJ17

    9 ай бұрын

    @@marcgv He did, they mentioned it in a recent vid

  • @50Something

    @50Something

    9 ай бұрын

    Absolutely, his ego fills the entire shop...

  • @JeffWok
    @JeffWok9 ай бұрын

    Freakin Excellent video! I really do like the variety of stuff you share on your channel Dude. Good on ya Rhett.

  • @johnwehby7371
    @johnwehby73719 ай бұрын

    Rhett, I really appreciate you letting us know about Big House Guitars. Didn't know they had moved into Showcase until your previous video.

  • @shadowghst7704
    @shadowghst77049 ай бұрын

    I use Mother’s Mag and Aluminum polish for frets. Works great!

  • @DChrls
    @DChrls5 ай бұрын

    Groovy tips. Love the superglue clear coat repair tip.

  • @FendCore
    @FendCore9 ай бұрын

    Thank you Rhett and Ben!! The capo trick will save me a lot of time, and didn't know the glue + string-loop + razor blade + scotch trick = that's a blast!! I use: - A very similar solder iron from Weller but with adjustable temperature wich I found very usefull, bought on the used market that is bulletproof and very efficient. - "Essence F" (in France) that is equivalent to his zippo liquid I guess. - Electric contact cleaner bomb, no matter the brand but WD40 make a good one. The equivalent of the Deoxit I guess. Protip: for rosewood or any raw-wood fingerboard I clean it with alcool then nourish it with japaneese camelia oil.

  • @moose6676
    @moose66769 ай бұрын

    I have used lighter fluid for years on the neck of my guitar, it is amazing 👍🏻👍🏻 great video thanks 👍🏻👍🏻

  • @mikeogle7545
    @mikeogle75459 ай бұрын

    EVERY one of these mentioned on is my bench. You are correct, Sir!

  • @walterw2
    @walterw29 ай бұрын

    good stuff! that said, two little notes: there's no good reason _not_ to put the titebond on the toothpick when filling the stripped hole before running the screw in; it takes hardly more time or effort and the result will be far stronger and more reliable that tele might have just been what was on the bench at the time of the demo but you _don't_ need to remove the neck to tweak it! the original tele design is that the pickguard slips right off without disturbing the pickup or even needing to loosen the strings, at which point you'll see a nice wide cutout between the neck pickup and the truss rod nut. adjust it with your offset screwdriver and you're good to go! same with the original '50s P bass, those little black bakelite pickguards were really just giant truss rod covers

  • @DrKevGuitar
    @DrKevGuitar9 ай бұрын

    I love this guy. He say so many things that I tell all my client and students. I will say this though - People with power tools *who know how to use them correctly* will do less damage to a guitar than an amateur with a screwdriver they found in a drawer or at the back of the garage. Perfectly possible to over-tighten neck screws, strip the heads and/or threads, and crack the neck plate, by hand. Correct use of the torque control on a good power driver will make sure it never happens.

  • @chessrootslove9916
    @chessrootslove99169 ай бұрын

    Great video, I always want to spend my time at a guitar store with their tech asking questions but I'm sure they have actual work to do so I normally move on to trying different axes...🎸🎸🎸

  • @castleanthrax1833

    @castleanthrax1833

    9 ай бұрын

    Most people are more than happy to share their knowledge.

  • @heiqqmtb6092
    @heiqqmtb60929 ай бұрын

    Great advice, they teach some of these tricks in our luthery school as well! One point though, the part with lighter fluid being safe on everything is not entirely true, it might do some damage on a shellac ( french polish) finish. But, that is something you're not very likely to come across at least with electronic ones and not with factory made acoustics either, so in that way you're still pretty much safe :)

  • @Dodgyguitarist
    @Dodgyguitarist9 ай бұрын

    Very interesting insight!! Enjoyed that

  • @davidhinckley2113
    @davidhinckley21139 ай бұрын

    What a great and useful video! Thanks a bunch!

  • @MrKbeaumont
    @MrKbeaumont9 ай бұрын

    My father taught me about using tooth picks on screw holes and about lighter fluid when I was a teen in the 70's. I still use those today. A couple of years ago I bought a new motorcycle and it had stupid safety and EPA stickers all over it. They are required to put them on the tank. Warm up the sticker with a hair dryer to get it off. Then after it cools, use lighter fluid to remove any adhesive residue that may be left.

  • @jwleaghn2194
    @jwleaghn21949 ай бұрын

    Good content brother… Some great info for us budding techs…

  • @timlaine6268
    @timlaine62686 ай бұрын

    I use naptha for cleaning during guitar refinishing. It also somewhat emulates what the guitar will look like after clear coating.

  • @AJMjazz
    @AJMjazz9 ай бұрын

    Deep well socket set (metric & SAE) with finger rachet drives are indispensable. And cheap at the local tool shop near the harbor. I use them all the time on pots, jacks, even as screw drivers with the right adapter and bit.

  • @cspace1974
    @cspace19746 ай бұрын

    The adjustable clutch on those Dewalt drills is a big help in preventing overtightening. The ring with the numbers on it lets you adjust how much torque is applied before the clutch “breaks” (ie the bit stops turning and the drill makes the distinctive clicking sound). With a little practice you can tighten screws just as much as needed.

  • @DanielSchim
    @DanielSchim9 ай бұрын

    Love the video! On a lot of those custom shop teles they actually have a little pocket that is under the pickguard that you can use a stewmac truss rod tool with and you can leave the neck on and just take the pick guard off. That’s my little cheat

  • @wesboundmusic
    @wesboundmusic2 ай бұрын

    More awesomeness! This gentleman really knows his job. OK, after 25 years. But still - I'm impressed! Thanks, learnt another ton!

  • @abeellis4470
    @abeellis44709 ай бұрын

    Love these videos Rhett!

  • @mateekay
    @mateekay8 ай бұрын

    Awesome info vid, thank you!

  • @jeffreygallahar4650
    @jeffreygallahar46504 ай бұрын

    Great video! Much appreciated tips!

  • @alxdelrge
    @alxdelrge9 ай бұрын

    I feel like this series is like if Tested and Rhett's channels collided. Absolutely love this. Thank you Rhett. I'm sure it's way too much of a learning curve but would love if Ben had his own channel.

  • @nottellingy0u
    @nottellingy0u3 ай бұрын

    I wish this could be a regular thing. Awesome content

  • @chrishudson4410
    @chrishudson44106 ай бұрын

    Love the Mills shirt! My favorite record store here in KC 👍

  • @BotsWeekendCovers
    @BotsWeekendCovers5 ай бұрын

    Great video man!!!! Thanks guys!!!

Келесі