Been playing guitar for over 20 years, building guitars for around 10, and the "just pull it back one fret" trick just changed my life.

@splitsurround

9 ай бұрын

right???

@rick00770

8 ай бұрын

Amen , great advice.

@Fawkes318

8 ай бұрын

I've always used the old pinky on the body, string on the index and spread the gap more the smaller the string. I'm gonna have to try this.

@jermthemicrocosm

8 ай бұрын

Dude… same and same.

@dugger0

8 ай бұрын

Same. I learned the trick he used to wind the string but I could never get the amount of winds right.

This guy = no BS and doesn't over complicate things. Awesome.

@rstevenhanson

9 ай бұрын

Yep. Best vid ever on these topics.

@ditlevj

9 ай бұрын

😢😢

@therapist6328

9 ай бұрын

You sir, are a mind reader.

@asdf9890

9 ай бұрын

This vid was nice, usually he chats so long I can’t be bothered, but this is good info

@mefirst4266

9 ай бұрын

BALONEY !!!!!!!!!!!!!!!!

I love that pull it back one fret trick. It's so simple, effective, and consistent. I wish I knew that 25 years ago.

I have learned more here in ten minutes than I have during the last 40 years of playing, stringing, and fooling around with guitars. Thank you!

@bustersgarage

5 ай бұрын

Me too! Great info!!

@twigsagan3857

Ай бұрын

Same for me except 20 years instead of 40.

Man, why can't all setup vids be like this? Straight to the point, plain English, nothing superfluous. Bravo. Keeping this.

@Zach-ls1if

7 ай бұрын

Because there’s people that speak other languages

@johndinsdale4454

7 ай бұрын

@@Zach-ls1if clearly! 😅 I just meant it's simple and clear. I've nothing against other languages, I promise you.

@Zach-ls1if

7 ай бұрын

@@johndinsdale4454 I know, I’m just being a dork and trolling, cheers and thanks

@johndinsdale4454

7 ай бұрын

@@Zach-ls1if ha ha! Got me. Have an awesome day chap 😎

@CreepyCat.

7 ай бұрын

Weeell Gibson did do a great job with their video

Fretter and inlayer for a professional acoustic guitar company here! Looking down the neck helps great to see if your frets are all in line and level. When light catches a high fret it will shine before the rest of the frets as you bring the guitar up and down with your hand. That’s what it should be used for, not so much using it to spot the neck itself!

@Bringyourownhammer

9 ай бұрын

I’ve always sighted down the neck like that to see if the neck is twisting.

@Levibetz

9 ай бұрын

Also when buying a guitar it'll give you a quick easy way to quickly see if you're buying a turd. I'm mainly looking to see it's the same side to side, that the neck isn't twisted.

@kristopherk5454

9 ай бұрын

It will certainly tell you if there are big problems, but as far as fine tuning you need a good straightedge or use the string as a straightedge for relief.

@autokrohne

9 ай бұрын

Thank you! Very helpful!

@ravenflight88

9 ай бұрын

anyone putting in frets knows that there is no such thing as "sighting down the tops" they ALWAYS check their work with a fret rocker guage. I wouldn't trust anyone's "eye sight method" does your mechanic align your wheels with eye sight method 😂😂😂

I've been playing acoustic guitar since 1964. This is the best information on set up I've even seen. I feel like I want to change all my strings now. Amazing information. Thank you!

@theflash1425

7 ай бұрын

I agree, he did a great job. If you want to see another very informative video on setup, go find the setup video from Rosa String Works (RSW). No, I"m not related to him!

@timn5008

2 ай бұрын

Same here. I bookmarked this. Fantastic information! I'm changing the strings tomorrow, and putting oil on the fretboard.

I've changed strings hundreds of times over the past 40 years and it's nice to see that a professional agrees with the way I've changed them. I've had arguments about it over the years with other players that do all kinds of weird knots and there is just no reason for it.

This is gold ... please feature Ben as often as he is willing!

@johniadanza4510

8 ай бұрын

Yes he’s great to watch

@christopherhawthorne5395

5 ай бұрын

Agreed

@NerdFiction

Ай бұрын

I'm out here like, when's Ben making his own channel? I'd be patreon sub for this quality of content.

I’ve always struggled to get the right amount of wraps for a string and the 1 fret trick is the best thing I’ve seen!

@jamesgardner2101

9 ай бұрын

I use the length to the next peg and pull back, then the first wrap over the tail and the rest under. About 2 1/2 wraps on the low strings and 3 on the highs.

@fiddsj45

9 ай бұрын

​@@jamesgardner2101same here except my dad taught me to just cut each string at the next peg and then string it up...the D and G just eyeball as though there was another peg past them.

Hands down, this is the best, most informative, and clearest summary/demonstration of basic acoustic guitar maintenance I have ever seen. Wish I was closer to Atlanta-thanks guys, for this video.

Thanks for posting this video. This is probably the best "how to" basic advice on Proper Guitar Set-up that I have ever viewed (and I have seen plenty) Your concepts are logical, simple, and easy to follow and remember. The part that really sold me was the "nothing straighter than a string" when trying to measure action height. You are absolutely correct sir. As a land surveyor technician most of my life, I can attest to that. We used a string as a tool and unit of measurement to measure vertical plumb. In other words, you can tell if something is straight simply by hanging a string with a washer or a nut and compare using the ole "eyeball method". When you said that, I knew that you knew what you were talking about and that your information was trustworthy. Everything here makes a lot of sense. I will share this video with my friends. Thanks again. Mike V. Albuquerque, NM

It is always good to have friends and colleagues who are not afraid to tell you the truth and back it up with common sense and logic. Great content as usual.

@mfhulskemper

7 ай бұрын

It's one of the major criteria I base my selection of actual, real friendship on. ; ) Rock on, everybody!

WoW!! I'm 67, been playing since I was 13. I sure wish I'd learned from a master like this decades ago. Thanks so much, both of you. I will pass this on to my son.

@institchez5366

9 ай бұрын

😂

Love it when the host just lets the expert geek out and keeps rolling til they're done!

What a game-changing video. I've been terrified to do anything to my acoustic guitar and BOOM you and Ben just simplified things so much. I like to do some of the work on my electric guitars but never felt comfortable on the acoustic for some reason. You also made my day with a couple of things you showed that I have been doing correctly (I guess I watched the right videos... HAH HAH) on my electric guitars like how I have measured the relief and also with my rosewood fretboards NOT saturating them with a ton of oil and leaving it on there but instead wiping it off right away. One funny thing was when Ben said not to sight along the neck I really enjoyed the way you handled being shown something different than what you've done in the past. I have always respected you greatly, Rhett, and you increased my respect for you by showing a willingness to learn. Good on you, sir!!! And now I have to make a trip down to Big House Guitars since I live in the suburbs of Atlanta.

Having seen Ben in many videos over the years, he seems like a really cool and knowledgeable guy. Always glad to see him here.

@RhettShull

9 ай бұрын

Ben is the man!

@jordanbrown7192

9 ай бұрын

​@@1LouderSoundit's the "Gibson wrap" supposedly because guys started doing it trying to fight de-tuning. Which works. Which is why almost everyone does it. Like almost everyone. Just not Ben. I guess it's just personal preference. It does look a little better, and it's easier to get the string off. That's the only benefit. If Gibson, fender, Martin and countless people swear by the correct way to do it, I would suggest listening to them, not the guy slanging consignment guitars.

@norseman61

9 ай бұрын

I think he was criticizing the Gibson knot technique from the perspective of a luthier. He doesn’t like having to undo the knot to remove the string. You know, because it takes sooooo long to do.

@kristopherk5454

9 ай бұрын

@@jordanbrown7192isn’t the Gibson wrap where you wrap towards the top of the post? Like the opposite of the standard wrap but not necessarily the locking knot?

@kristopherk5454

9 ай бұрын

@@1LouderSoundDon’t hate the player, hate the game. That’s how you get tons of followers and views- make a provocative statement like how to “properly” do something. I bet if you made a video claiming the opposite and introduced yourself with your credentials you’d get good traffic too and people would learn the benefits of doing things as you’ve experienced. For example the great Rene Martinez shows how he winds strings. He does the locking wrap and aims for as few wraps as possible because the extra string length leads to more detuning as the string stretches over time. 👌🏻

Ive been restringing my own guitars for decades and Ive never seen the back up one fret technique before. I’ve overthought this to death and its been this simple the whole time 😂

@HowieStephens

6 ай бұрын

I've always held my hand perpendicular to the 12th fret with the string going over my hand to get the length. But now that I think about it, that would be a different total length for different sized hands. Will try this one-fret method next time.

@missingremote4388

6 ай бұрын

Same here . 12 fret bend string. Then tighten

@reginaayat5390

5 ай бұрын

Learned that one early on. Not sure where I picked that up

@stone5against1

5 ай бұрын

@@HowieStephens Same! pulling back one fret is so much more simpler!

@SwedeSpeeder

4 ай бұрын

Imagine me using the pull the string up from the fretboard a fingers length...with four inch fingers. 😂

A tip for using steel wool - wrap it around a magnet and all the little steel bits don’t go everywhere.

I had a whole discussion with a friend about how string saddles on electric guitars look like two "stair step" patterns. This is the first time I have ever heard anyone besides me talk about this relationship. Thanks for the validation! Keep up the good work, Rhett!

Wow. One of the most helpful guitar videos I’ve ever seen! I learn so much every time Ben is featured on here.

@liquensrollant

9 ай бұрын

Agreed.

@dannyhughes5528

9 ай бұрын

Yeah Ben much respect and a truly nice guy

@kellymckenzie4865

9 ай бұрын

Seriously. I want a KZread channel where he explains everything

@maxx5953

9 ай бұрын

Ben is one of the most knowledgeable people on gear you will ever meet. He has done work on a number of my electrics. All play and sound incredible.

@mcburney74

9 ай бұрын

When i discovered using a feeler gauge for neck relief about 8 yrs ago after counless times of having my guitars and Bass guitars setup wrong by 4 different guitar techs from 4 different stores in my area! I learned too set up my Instruments myself with no headaches or dissapointments letalone $250 in setups while there guessing looking down the neck 😢 ! Benchmark with no guessing 😁

I took a chance and restrung my guitar as suggested here. I played a gig yesterday outdoors near the ocean, and my guitar has NEVER stayed in tune so well. I mean, this has really changed the game. I'm shocked and delighted to have finally found a better method. PS ... I've been doing it wrong for 40 years.

@TheDiaboliq666

8 ай бұрын

Wrong how?

@ourjob6629

8 ай бұрын

Remember, good technician never work in a store. He is just a storyteller.

@jeffro.

8 ай бұрын

​@@ourjob6629Yes, of course THAT makes sense. NOT!

@onixtheone

8 ай бұрын

@@TheDiaboliq666the biggest problem people have restringing is too much or too little wrap and getting wraps on top of each other rather than orderly under each other

@glennrosa234

8 ай бұрын

Same hear bro i would wrap it manually bottom up same results but waste time th 1 fret w winder cant go wrong ....

Hands down one of the most useful guitar setup videos I've ever seen! Thank you

I've been stringing my guitars the same as shown in this video (as far as winds) for 20 years and have never had a single issue. I never understood why so many people want to use knots or weird wind patterns.

A luthier friend taught me this trick to help with intonation: Fretted Flat Forward, meaning if the fretted note at the 12th fret is flat compared to the harmonic, move the saddle forward (towards the neck).

@doctorjones278

8 ай бұрын

"Sharper is shorter", is how I've always remembered it.

@Paul-rt4ix

8 ай бұрын

@@doctorjones278 Correct ; )

@joegriffithsmusic

7 ай бұрын

The way I remember is turn in the smae direction the tuner is showing when you check the intonation. So if the note is sharp then turn the screw to the right, if it's flat then turn it to the left like it shows on the display.

@tomgorycki7176

7 ай бұрын

@@joegriffithsmusic that makes sense!

@joegriffithsmusic

7 ай бұрын

@@tomgorycki7176 haha it's just cause I always forget which direction makes the string shorter or longer lol

This is seriously one of the greatest videos ever. As a working musician for many many years I can’t tell you how useful this has been.

The new trick here, for me, was "wiggle" the neck by its' head after turning the truss rod. Very cool. I've been setting up my own guitars for 15 years, but it was great to see that I do things the same way as this expert.

I love his fret trick, I'm gonna use that from now on. Another trick I learned from my mentor in my recording studio days was after you restring, tune the guitar, then pull every string at every fret and tune again. This is especially helpful for the studio or right before a show when you need to stay in tune

@MattMeNotYou

9 ай бұрын

You should only need to stretch your string open, 5th, 12th, 17th (approx); more if you like, and a couple times up and down. Doing every fret is overkill. Try it next time, you'll be surprised. Once the string is stretched that's it, you shouldn't need to do it before a gig or anything either. A good trick to stay in tune is to always tune from flat up to the correct pitch, never down - it keeps the tention behind the nut. That drastically reduced how often tuned during a set.

@EarthWalkerOne

7 ай бұрын

@@MattMeNotYou I just pinch the string by the bridge and slide up to the nut while pulling up and down. This method is faster and better results IMO.

I love the Gibson knot. I am not a guitar tech though, so I am not dealing with unwinding them every day. But nobody can convince me that its not better with less slippage, not even a guitar tech who doesnt like it. He didnt say it wasnt good, he said he didnt like it. The only reason given is, unstringing them.

@VladimirGolev

8 ай бұрын

Completely agreed. And surprised there are many comments braving that they do it “right” like this tech. And no comment that he didn’t even said why he hates it (maybe just more work for him to restring) I used this exact way of stringing without knot for decades, but it’s not holding tune well. But after KZread was invented, I learned about knotting, and it changed a lot. It’s used by many pro techs who work with top bands, and who need to restring in few hours before the show or in a mid of the show (in 5 mins to replace a single string until the next song). And they use it for reason, less time for a string to “stretch”. I think with knot it’s more complicated to achieve and easier to fail or create a terrible overall wraps. Btw, there is no right or wrong in music, if you do something and it works for you - then it’s cool. But if you want, you can experiment and try different things, and decide what works better for you.

@bobrojapistole4426

8 ай бұрын

I'm with you! I met magic guitar man who worked on Lucille. Not your average fellow as far as whose guitars he's worked on and I used the knot ever since.. you don't need as long for your strings to stretch and set in. Which he prestetches strings after stringing also... But that long wind bit makes smore stretch over longer time happen in the windings and it will take time for those to hold tune more then the knot.. it's pinched right their. A working blues man musicians knot

@clinlashway9147

8 ай бұрын

I noticed after he said he didn't like knotting, he then said he doesn't cut the string until it's tuned because it might slip. Yeah, okay?. No question the knot holds better but is therefore slightly more difficult to remove. But I can understand for a tech doing many guitars a day, it could be a little annoying. But I'll keep knotting mine.

@abraxas511

8 ай бұрын

@@bobrojapistole4426 Thats how I see it also. You only stretch from peg to tuner knot, instead of from peg to three or four turns around the tuner knob. Thats why it feels so good and consistent.

@jaxone1259

7 ай бұрын

He Shows / hates it when undoing it and he's not acting like a Professional guy doing it either and he doesn't seem to know that less winds are Better ...that's why I have used it for 50 years it works flawlessly and 1 1/2 -2 wraps on the lower strings I don't use it on the non wound strings they're wraps don't add that much bulk and don't affect the sound as much. Yes I think you'll hear more Resonance using the Knot because more wraps is definitely not better JMO. and it's on wind on top 1-1/2 under .. doing it like Martin has since their beginning. It is the BEST WAY JMO again

What a fabulous guitar tech Ben is! Great video. Super-informative, clear, and easy to like.

Really good tips on acoustic guitar care and setup. Caveat: I do sight the neck when evaluating a guitar but I am not looking for relief, I am looking for twist or other significant neck problems. Those (I think) do show up when sighting down the neck.

@re_loyola

6 ай бұрын

And fret sprouts, too

This is why I watch your channel. There are so many trends, breakthroughs, magic and bro science over the years that we need to take a fresh look at what we do every now and again. Great video.

Interesting. I've never sighted down the neck to set relief, only to check if the neck was twisted. It's nice to have your habits affirmed by a pro. Ben's a cool dude and a good teacher!

@ev25zv

5 ай бұрын

It seemed like Rhett was talking about checking for a twist and the tech was thinking people who sight a neck do it to check relief, as I never ever heard of anyone sighting a neck for relief - only sighting for a twist.

@halffulltome

Ай бұрын

@@ev25zvsame here

Ben really knows his stuff. I’ve been using his methods for the last six years. 👍

I have been an acoustic guitar player for over 20 years And I just learned more in the last few minutes Then in 20 years combined. Great video, thank you.

As a furniture makers, going to let you in a secret. You are not going to risk your frets falling out from too much oil on the fretboard. You will however risk them becoming loose if you never oil your fretboard due to shrinkage of the wood from lack of moisture allowing the slots to open up. But like he said, you don't need to leave it on there for a long time. Just be sure to use a quality finish like Howards Butcher Block Conditioner and use it often. I pretty much do my guitars ever time I change strings. I just wipe it on, massage it with my fingers into the fretboard, then wipe it off.

@Tonetwisters

8 ай бұрын

GOOD on you, Sir! We used Watco back in the early '70s at my brother's music store and I still have the can. However, I have advanced to other things. I will try that Butcher Block Conditioner and see how it do!

@paulhopkins1905

8 ай бұрын

As a guitar builder/repair man, you are wrong. Wood reaches an equalibrium, once it's dry it fluctuates slightly, but doesn't completely dry out. I have seen plenty of damaged fretboards from over oiling, I have never seen damage from not oiling it

@Reign_In_Blood_963

8 ай бұрын

@paulhopkins1905 Ok, I guess all the fine woodworkers are wrong and wood does not shrink when it looses moisture. Moisture in wood is relative to time and environment.

@paulhopkins1905

8 ай бұрын

@@Reign_In_Blood_963 Yes, in this case you are 100% wrong. Secondly, you are no more of a "fine woodworker" than a luthier. I have seen loose and high frets caused by over oiling, several times. I have worked on pre WWII guitars, that had never seen a drop of oil in their lives with no issues at all. The FACT is that a properly dried piece of wood, especially a tight grained, oily wood like rosewood or ebony, which are what most fret boards are made of do not need to be oiled.

@Reign_In_Blood_963

8 ай бұрын

@@paulhopkins1905 So glad you know so much about me and so little about wood. You do you. Don't belittle others that don't agree with you.

Thank you, Ben and Rhett, for the clearest explanations of these set-up issues!

Love hearing from Ben, he should have his own channel. If I lived in the area I would absolutely immediately switch to him for all my guitar work.

I learned more in fifteen minutes with this video than in ten years of playing guitar with teachers. Thank you!

Best 'set up' video I've seen after 3 years of watching guitar videos on KZread. Would happily watch a full video on each of these points with you learning, along with us viewers, from Ben. Great stuff lads! 👍

Those "fret guards" can REALLY mess up your fretboard if you don't pay attention, also. Cheap ones have a bur on the edge so as soon as you lay it on that nice wood and start grinding it into your fretboard while you polish away, it leave a huge line thats dug into your nice fretboard parallel to the fret, from the burr on the edge. I know because it happened to me. I was SICK. All because I bought the $5 set of protectors instead of good ones from Music Nomad or somewhere.

@castleanthrax1833

9 ай бұрын

I think that's going to depend on the set. It's easy enough to feel if there's a bur on them, and if there is, you don't use it or you file away the bur. I can't imagine the steel is very hard.

@feddomeijerwiersma6955

9 ай бұрын

1 Lay a piece of sandpaper down on a table. 2 Pless fretguard flat onto paper. 3 vigorously move guard left and right a few times. 4. Grab a drink, job done

@J.C...

9 ай бұрын

@@castleanthrax1833 it felt fine to me. But it still screwed it up. It may not have even been a burr but just a hard corner. Whatever the case, it did. Nobody warned me about that so I assumed they were fine to use since they felt fine. Boy was I wrong. Compared to the Music Nomad set I got later, there's a night and day difference but you don't notice that unless you have both sets in-hand. I didn't until I got the better set later.

@J.C...

9 ай бұрын

@@feddomeijerwiersma6955 as I just posted, they felt fine. I wouldn't have just laid a burr down and ground it into my guitar. Since they felt fine to my fingers, I used them and it was only once I got some done that I realized what they were doing.

@socialmeaslesinpartnership1252

9 ай бұрын

Years ago I used to just wipe the guitar down with all the strings off. No lemon oil/asses milk conditioner, no fret polishing, no fret guards from Stewmac etc.....just look at the f/board and give it a bit of a rub. Buying, setting up was just a matter of sighting along the neck from the nut end and in the vanished guitar stores, all the guitars had clean f/boards and frets etc, no crud or bogeys but no one ever thought about polishing the frets................ and nothing in this has changed. Most of us wash our hands and................that's enough. The tool box full of gizmos like radius checkers, sprays and lotions are just a load of gay stuff that no one needs. It's got to be said. This world of "flipping" guitars looking for the "keeper", huge guitar collections, makers bringing out "annual ranges" like Paris frocks and guys constantly "swapping out" p/ups is for the birds.

I could listen to him talk about guitars all day. He has that same easygoing demeanor that all of our favorite teachers had back in school, all the while dropping truth bombs.

@lasagnahog7695

7 ай бұрын

I agree, it's a real pleasure hearing someone talk about something they love and are super knowledgeable about. Those crappy teachers lacked either the love or the internalized knowledge.

One thing that always annoys me, the vintage split post tuners on Fenders like the Mustang are literally the best design for a tuner and ease of stringing. Why did this stop and why aren't all tuners like this? Honestly blows my mind.

@user-bl3si3kq6x

7 ай бұрын

Because they can't charge as much and the guitar won't weigh as much or feel as substantial.

@havagethesavagecabbage3616

7 ай бұрын

In my humble opinion I cant see them changing from split post to eye hole tuners just for adding a few grams of metal if that. Its a safe bet to say no one will be able to feel the difference in weight anyway so it has to be for either function or form, perhaps it just wasn't stylish, or the closed version being shiny chrome. instead of speculation I'm certain there's an article on this very topic! I hope you're just being facetious. @@user-bl3si3kq6x

@johnarcher9480

6 ай бұрын

Well…they might be the best for non-locking tuners. Locking tuners are easier, and better still.

@jcows12

5 ай бұрын

I agree the fender vintage split tuners are fantastic. Leo fender was not a musician but he definitely listened to musicians opinions on what improvements could be made.

@ross3818

5 ай бұрын

Because it's not a good design.

Useful and no BS video. Love it!

These tips are invaluable. Ben is awesome! Always love seeing him in your videos.

Got my first guitar 4 months ago and this video provides so much information on the maintenance and care. I might not do it on my own yet, but at least I understand a lot more of what I'm looking at.

Super helpful info! Ben is awesome!!! I'd love to watch him work!!

Ben Calhoun… sounds like a real Cowboy name that John Wayne would have played😂. Learned more in 15 minutes than I have in 40 years of playing guitar. We need more content like this!! ❤❤

Some pretty brilliant tips right there. I absolutely love how you're supposed to string to get the ideal number of winding. Even after almost 30 years, it was at times a bit of a guess, but that 'one-fret-back'-thing is super handy. Thanks guys!

Excellent walkthrough and explanations by Ben. Wish he was at my local guitar store.

Excellent episode. Thank you Rhett and Ben!

I love this kind of stuff - I know a bit about setup and maintenance but always learn something every time I watch these kinds of shows. If I was a young man again I would go to lutherie school and make a career of guitar and amp repair/building.Just didn’t know what I wanted to do with my life back then. Ever wish you could go back and do it all over again with the wisdom you have now?

Ben is a properly knowledgeable dude, have to say mind was blown a little learning about why the saddles are arranged as they are for intonation to be spot on.

Amazing tutorial, I learned a LOT. Plus - I have NEVER seen these things explained so simply and plainly in 30 years of playing. A+

Great video and advice. Having played and worked on guitars for over 40 years, everything he said and showed is exactly the way I maintain every guitar I've ever owned or worked on.

For me the reason to sight down the neck is to check for neck twist. It something I always do when I’m considering purchasing a new guitar. I would never even think to do it in order to assess neck relief… I don’t see how that could ever be an accurate or meaningful way of doing that, so well said Ben 👍🏻

@ledoynier3694

9 ай бұрын

same ^^ Looking down the neck for relief is near damn impossible.. and if you wear glasses, forget it, it'll be either distorted or blurry lol

@Emhartain

7 ай бұрын

that being said, sighting down the neck to 'check for twist' is about equally useless.

@davidburke2132

7 ай бұрын

@@Emhartain and why exactly is that? You can definitely see if the nut and lower frets are out of parallel with the upper frets and bridge (and then consider how the bridge is set with respect to the body on its bass and treble sides) by sighting down the neck in that way. The human eye is very good at detecting when things are out of parallel in that way. I’ve spoken to a number of guitar techs who have spoken about similar checks. But I’m sure you’ve got a thorough explanation of why it doesn’t make sense and wouldn’t just be making a superficial and unexplained comment just to be contrary, right? 🤔😉

@user-bl3si3kq6x

7 ай бұрын

​@Emhartain it will be obvious if it's very twisted. If it's out a tiny bit. Sure.

@dickstryker

7 ай бұрын

Look at it from the side for relief. If it's decked flat or bowed even slightly in either direction you'll notice.

This Tech is a master - excellent advice - straightforward and useful! I am going to have to watch it again and take notes.

About 35 years playing guitar and I just learned a few things from Ben. That's so awesome - thanks guys!

The guy speaks with the authority of someone who has been doing it for a while. Good video!

I certainly feel better about how I do adjustments and re-stringing on my guitars now. Everything that Ben has shown here is exactly what I have been doing for years, mostly out of intuition and common sense. And, the truss rod IS your friend. Do not be afraid of it.

@PaulReveres

8 ай бұрын

Hi can you help me find this "truss rod" he is using is it a brand? When I go to Amazon they give me little rulers. His looks like an L hex lock key unless that's not what it is. Thanks

@BimmyRee

8 ай бұрын

@@PaulReveres No, the truss rod is in the neck. It's the thing he's adjusting with the tool, and the tool he's using is a basic hex-shaped allen key.

Such an informative and entertaining channel!

This guy knows how to put a string on a guitar. I've been doing that for 63 years. People who do that weird wrap over string kind of stuff and then say that's how it's done don't know what they're talking about.

best set up video i have ever seen, quick and to the point

Looking down the neck helps tell you if the neck is warped. Don't abandon the technique, @Rhett Shull -- just recognize what information you are getting from the exercise.

I don't know why, but Ben seems happier than some of the previous videos he featured in. Much more loose and easy going. Good on him 🙌🏼

My guitar teacher taught me to string guitars that way on my first lesson. That was thirty years ago and I still string my guitars the same way today. Great video!!

Pulling the string back one fret is a great idea. It makes it so easy and allows for the proper amount of post windings to keep the string locked in place...!

Good to see Ben back on the channel. He really knows guitars.

I like to use the pinch method when restringing acoustics and electrics. That’s where the first wrap goes around the peg above the cut end of the string. Then when you wind the string , the cut end gets pinched between the top two wraps around the peg. Then, if it’s a Gibson style headstock, I wind the G string going up the peg, unlike the other five strings that wind going down the peg. This solves the G string’s issues with staying in tune. You don’t get the steep break angle from the nut, resulting in less tension on the string and more tuning stability. All this stuff is subjective though. If your way of doing things works fine with no issues, there’s no real reason to change it. Do you. ✌️

I’ve been playing guitar for 20 years. This is one of the most informative guitar set up videos I have seen. Learned a lot. Nice work! Thanks!

This video packed in a lot of knowledge in a short amount of time. Very much appreciated.

Finally a Pro repairman that agree's with me that sighting down the neck is not a good reliable method at all! 👍 I have always hated that method because as Ben said there are things like binding and your eyes playing tricks on you as well as you cannot do it in the playing position.

@odelljl

9 ай бұрын

...and yet I see pros doing it in even high end shops in my area. I believe Ben here and personally use the capo method he demonstrated. Just makes me wonder what those guys are looking it.

@These_go_to_eleven_1959

9 ай бұрын

@@odelljl I have "Heard" you can see if the neck has a twist using this method?

@odelljl

9 ай бұрын

@@These_go_to_eleven_1959 that could be. Next time I work with them I'm going to ask... Nicely of course!

@joshbariola1393

9 ай бұрын

The "sight down the neck" idea, in my experience, was more about buying used guitars, and making sure the neck isn't twisted, or bent towards the treble or bass sides. Especially when you're buying from some random guy, or a pawn shop maybe, rather than a reputable guitar store or dealer. It could have been kept in a backyard treehouse for the last twenty years, you never know. Yeah, I wouldn't expect to gauge the neck relief that way. Or measure anything else that required real accuracy. But I think it's still useful to quickly make sure you aren't buying an obvious hunk of junk. 🤷‍♂️

@halffulltome

Ай бұрын

@@joshbariola1393exactly. It’s just a simple way to quickly see if the neck has major issues.

This dude is a legend. We need a Ben Calhoun in every guitar store.

@frankpuryear3844

9 ай бұрын

Not so fast pilgram.? If you dont worry about smooth string slip , ok. If you need a plec machine and small flat edges to take a look at your neck ,. Ok . If you cant be bothered to take the strings off of the tuner peg., Ok. If you have to measure what doesn't buzz For You then ,ok If you cant just feel a great set up in your hands , then yea ok. If you want to be preached at by some guitar tech ,ok rock on. I guess you are right. All these years ????? How did we make it without him .???????????????????????

Some fine info. Quick, easy, to the point, no nonsense. Really quite simple. Great vid.

What I learned is every Guitar tech and luthier has their little pet peeves and likings . Most like the luthiers knot and there are few that are not very fond of them. What I learned is don’t take one persons would for something but apply what you like from different sources.

I was always told not to remove all six strings at once because that warps the neck. I remove two, put two new strings on, remove two more, etc.

I’m not sure if it applies for the acoustic guitars but: 1. I saw some guy on youtube demonstrating how this knot thing really improves tuning stability on the strats with tremolo. He demonstrated with and without the knot, he was smashing tremolo like dive-bombing and the knotted strings were staying just in tune, while without the knot it immediately goes out of tune. 2. Lots of turns on the tuners can worsen tuning stability, especially when you have a tremolo system, as each turn can stuck/catch the metal and then suddenly get released. That’s why locking tuners exist, when you have just no turns, the string has no room to be caught either by other turn, or by the tuner itself.

@tiagoramalhais5493

7 ай бұрын

I believe the "Gibson" knot he showed was not the same knot you are talking about at least looking at the way this luthier did it, the one you are talking about is the one I use and I believe it's the best way to do it.

@johnarcher9480

6 ай бұрын

This is why locking tuners are the best!

Such a great video! You can tell when someone loves their job and is good at it! Could have listened to Ben for ages more! Get Ben to do one of your electric guitars next...?!

Love the setup videos with Ben! Please make more if possible!!

I don't cut until I'm done either. Just in case. Caution. Kinda like the old woodworker's "measure twice, cut once." I don't do anything I can't go back on until I have to in any of my shop activities. Same with woodworking, metalworking, leatherworking, golf club building and repair, anything I've ever done. When restringing, I cut the strings once I have them all on and basically in tune. Then I'll cut, stretch and fine tune. I like the pull back one fret trick. It does work out to about the same.

Good info. It’s a miracle my acoustic has lasted for 24 years in almost perfect condition without doing any of this 😂

@drewg3087

5 ай бұрын

Exactly.

@rfphill

4 ай бұрын

My guess is you are probably acoustic Jesus and do everything perfect and this video isn't useful to you. There is a whole host of us normies that got bad or misguided advice somewhere along the way and this guy is just saving us time and frustration by dispelling some myths and making the process more straight forward.

Excellent video! Some things I already knew and learned over the years. Some great new things I now know because of this video. And most importantly it helped me fix 2 issues I was encountering on 2 of my guitars. Best video of yours I have seen in awhile, Rhett. I have been slacking on your content tho. Hopefully that stops, but great work and keep bringing awesome content!

Rhett, this is an outstanding video on acoustic guitar set up and maintenance. Thank you.

Always enjoy your videos. I've been playing 47 years and am totally guilty of the Gibson wrap! Gonna try his suggestion, looks a lot easier. Not a big fan of steel wool on electric frets because of fear of shards getting into the pickups. I just use the Music Nomad stuff and it works well for me. Thanks for the tips!

As a tech myself I've noticed a positive difference in tuning stability if you do a turn over and the rest under vs doing them all under like this guy does. Gibson knot works well and isn't that much of a pain to take off. High grit sandpaper, fret erasers or micromesh polishing pads are way superior to steel wool. It's cleaner, doesn't fuck with pickups and has a better result and more control over the polishing. Also, if you're gonna use a fret guard, which you should, why polish perpendicular to the frets? They won't shine as much and be harder to polish. Start with 1000-1500 grit and go up. As for the relief, it's just another adjustment tool. Someone who really hits the strings hard might need more relief than someone who taps a lot and has a light touch. Really mediocre tech & info in general.

@YoureNowOnTV

9 ай бұрын

100% 😀👍

@hiyouseemcool

Ай бұрын

I’ve always used as few wraps as possible and never really had issues with tuning stability even with heavy bending. I’ll try the over under string wrap next time, keen to experience the difference

the string wrap trick for tuning... MIND BLOWN. I love it.

most succinct discussion I have ever heard for setting up a guitar.

Ok I like that pull back to the first fret thing. It's consistent and easier than what I learned. I used to stand the string up on my middle fingers at the 12th fret.

Ben killing guitar setup myths while laughing in the process, is as sweet as a g-string in tune. 🎸

I've been playing for almost 30 years and I still learned a lot. Thanks!

Nicely done! Grateful for the masters sharing some of the wisdom with us mortals.

Nice, simple and easy to follow tips for most players. Unfortunately there's a lot of videos that can over complicate what is essentially very simple. Up until a few years ago I'd always used that Gibson knot when restringing guitars. It's almost guaranteed the string will never slip - but it does look a bit ugly. Then I started using that luthiers wind where one wind goes over the top and all the others under and it locks the string in place. Looks very neat as well. One thing he didn't show was you need to stretch strings as well.

I’m the guy that put oil on fretboard and go to lunch 😅

Fantastic video. Thank you so much for posting all of these helpful tips/tricks. So thankful for this video.

Great video guys!!! A lot of great insights here.

4/5 for me. I hybridize his method and employ the “Gibson knot”. He mentions how he doesn’t snip the string until he winds it cuz it could slip out sometimes… the knot ensures that it doesn’t do that, and it isn’t really any extra effort to remove it to change strings. Utilizing the knot also insures greater stability with alternate tunings, particularly those that like to switch between standard and Drop-D Tech for 8 years, so not a veteran by any means, but I do what works for me and my clients and he does what works for him and his. Try both, see what you like best I will say, I REALLY liked his explanation of the intonation and why it’s done the way it is. I appreciate that he explained that deviations in normal intonation stems from a nut issue

@john564holloway

6 ай бұрын

Haven't had an issue with the Gibson nut, either.

@MSirirat

5 ай бұрын

I also use the knot method but not the way that he showed. What’s important to me is the number of wraps. I’ll do no more than 1-1/2 wraps around the post on both nylon strings and steel strings. It’s been very stable and easy to fine tune and get to pitch quickly. This method has been working for me for 50+ yrs.

@PiPArtemis

3 ай бұрын

Also doesn't help that he did it backwards

@vernonhoover3060

2 ай бұрын

I’ve been doing this to my guitars and mandolin for a long time, because it works. I’ve never heard it called a “Gibson knot” until about a month ago.

This is the way I've always put strings on. I've never seen the need for the crazy loop and wrap method.

Really helped me dial in my SG! Plays perfect and holds its tune for days

This guy knows his business, always a pleasure to learn from a master.

This was a very informative video. I've been playing guitar for 40 years (non-professional just for fun) and I learned a lot such as his simple stringing method, how to clean the frets and fretboard properly, and his simple explanation of how intonation works. Good stuff.