I designed the assembly line that builds that red transfer pump on his bed mounted fuel tank! Small world!

“Don’t pay too much attention to him, and he won’t bite ya” 😂😂😂

Really nice looking one ton! Can’t believe it’s almost 20 years old! Great job on the new parts!! I’d drive it for sure!!! ❤️

Kick ass video guys! That truck is clean, great job. 💯👌👍 I really like all the break down you did in this one. Explaining everything and how it all works helps the next person, I love that you did that. Thank you!

I like how you explain how stuff works! Sharp looking Ford!

You know you can go through the videos without all the explaining.. BUT please DO NOT STOP It's makes for more than just a videos it's a lesson/class/teaching.. several ideas come from knowing how the different things actually function, what their purpose is and so on. Keep keeping on we are riding along with you [notepad ready whenever you upload lol]

Can you introduce the guys/girls ya have working on all those projects? I know you Holden boys have amazing people to help build your business!

Hell yeah brother! Love hearing the Schaeffer’s love.

man I learned so much about just suspension bits from this video alone. Knowledge kings!

Great content guys! Loved it!

This is a beautiful setup !!! Would it be possible to get a parts list ?

cant lie. i love the ft four link and rtls on my 03.

Wow that truck will definitely ride much better great video thanks

awesome vid and truck

oh man...this TOTALLY needs doing on the Cuda also. I never knew they did kits like this...actually said to Muscle Rod shop guys that it'ld be awesome if this could be done about a year back. They said it'ld be the dream, although, they never went that route eventually it would appear. 😓 My thought was that it'ld make it a bit like that desert racing Porsche they did a while back...which would be AWESOME! 😅

Nice work on that truck ! Wait a minute, what are you guys doing working on trucks when you're supposed to be finishing that building ? ! ?

I would like to have seen your measure points. Can you put a level on the bed rail to check? I just put a coil conversion in my H2 from being inspired by yer work. 🤘

Man I need this for my 04 excursion.

Looks good

Sorry, but I need to a$$ a question.... 😋 Good looking truck! Nice work!

Does the turning radius improve if you keep the 2003 front axle instead of swapping to the 05 axle?

I desperately need that conversation on my truck. I have an 03 f-350 single wheel just like that. I want y’all to do it for me, no doubt

What do you charge total for a set up like that? Have an 02 7.3 Ex

There’s an 03 6.0 stick shift centurion at a dealership ship near me with 80k I’ve been wanting it forever but they won’t drop price even though it has many suspension issues and a few wiring issues with the trailer system

@BrainsofFrank

Жыл бұрын

Cash in hand to cover the price you want to pay. Talk to them and be like I got money in my hand for this truck at this price. Don’t want to trade money for the truck well here’s my number and call me when you are ready to sell for this price, oh and here is what it will cost me to fix the suspension and the wiring and then shush and see what they say. Don’t be afraid to walk out with your cash still in your hand that day.

This video has been out a while, but I want to know if this kit will work on an 04 Excursion with the 6.0?

Would that kit work on a 1995 f350, if I get those super duty axels

Can I use that kit to 4wd swap my 03 f250. What front axle do you recommend?

what state are you guys in ? also how much to install the 6" full traction coil over on a 2003 excursion 4x4 7.3

You have a link to find this kit?

How much for the conversion kit for a 2004 automatic, 4wd??

Is there a similar kit for a 95 powerstroke? Without an axle swap?

Nice!

Where are you located ? How much you charge to do the coil over conversion?

What was the total installation time?

My understanding has always been to never EVER stack blocks on leaf springs. Y'all sure that's OK on this one?

Nice. Time for some new shoes.

Awesome

Did you not wash the frame before bolting those new pieces on? Won't that become a magnet for rust?

@coletonjackson3159

Жыл бұрын

It’s Texas. Too dry to rust

Leaf sprung front ends are better for towing, and, NO DEATH WOBBLE!!

Where can i buy this suspension?

What years?

Looking awesome now all it needs is bigger tires

Mango Monster Supremacy

Graet job guys! You think this could be done in same year excursion?

@holdenbros910

11 ай бұрын

Sure can. We have done some excursions!

@alb2571

11 ай бұрын

@@holdenbros910 I'll start looking out for those parts, thanks a bunch

Wish my 00 4 door short bed 4x4 was 6 speed

Alright. That truck is so desirable.

Your knowledge is famazing

@keithvnumber1

Жыл бұрын

Also are you moving everything including lifts and tools and any parts or equipment being stored? Or are you using both shops and getting new lifts, tools & equipment?

What did it cost for conversion and installation $$ ? I just started watching y’all , where are y’all located ? I would like to see about your shop doing this same conversation to my 2001 F250 ?

@nicholasgalonski99

Жыл бұрын

Full traction suspension

Will y’all be at Bristol?

@holdenbros910

Жыл бұрын

Yes we will be

Do they have a conversion from leaf to coil for the rear of a 07 F250?

@gregshue645

Жыл бұрын

No but they have a badass torque link rear suspension kit that you should look up. I wouldn’t put coilovers in the rear that defeats the whole purpose of the truck.

@TheRoadhammer379

10 ай бұрын

MADDOG KUSTOMS makes a rear coil over kit for the superduty

Why go thru the expense and hassle of installing a 4 link front suspension and then just double stack blocks in the rear? That job is only half done.....

Great lift kit Holden Bro’s could i send my 99 f350 over for you to fit that kit on I’m in England 🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧do you think the shipping would be much money 💴😂😂😂😂😂😂😂 great vidj Bro’s keep them coming please 👍👍👍👍👍🤘✊💪😎🏴‍☠️😎🏴‍☠️😎🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧

Shouldn't be to far away u do a podcast 😆😆😆😆😆. You have the personality for it.👍👍👍👍

How much does this conversion cost?

@christopherwedemeyer2993

Жыл бұрын

Six to seven grand.

@karlfair

Жыл бұрын

@@christopherwedemeyer2993 Thanks

@nicholasgalonski99

Жыл бұрын

Full traction suspension

What is the cost

@nicholasgalonski99

Жыл бұрын

Full traction suspension

love you vids and remember Lets Go Brandon

If your back end in is always running high, which means you are always running downhill!!! Which is turn safe fuel!!! Right!! 🤔 Lol

@dalegereaux1863

Жыл бұрын

You are correct ! Gravity, it's not just a good idea, it's the law. 😏

Bolt in place then say fuck those bolts. Weld every thing in place .

@brokenwrench404

Жыл бұрын

👍🏼

@TheRoadhammer379

10 ай бұрын

bullshit, welds break, your welding skills are not guaranteed unlike grade 8 bolts.

@whysolong27

10 ай бұрын

@@TheRoadhammer379 sorry my welds don't break

@whysolong27

10 ай бұрын

@@TheRoadhammer379 like bolts don't. I have broken many over the years

I know each of us want something different from you, but I'd like to see the work rather than have you explain each part.

Yo.

Man, I would much rather work in a bright white shop interior like your current shop, than the black painted walls of the new shop. Just sayin'.

@holdenbros910

Жыл бұрын

Our new shop will be much brighter then the current one. 4 times the lights. Bright floors and walls will be white wainscoating up the walls 8+ feet

@stanschmitz5566

Жыл бұрын

@@holdenbros910 Sounds good.

@thedivinemissm7795

10 ай бұрын

@@holdenbros910 Did you ballpark the total package cost $$ ?? Would be helpful to know what the price range of that kind of work comes to... Why don't you answer your viewers all wanting to know what that costs ???

✋🏼🇦🇺👍🏼

.

maybe ramble less and show work more

I use the word “stout” regularly now after watching this channel! Awesome videos guys!! 🫡

Shouldn't be to far away u do a podcast 😆😆😆😆😆. You have the personality for it.👍👍👍👍