I learnt that the lens can be made to retract or extend with a 3+V supply from Remonter channel and now i learned you can activate the shutter and aperture in the same way.😊 If there's no live feed from the sensor then the aperture blades are stuck shut. If there are horizontal lines in your photos, then your shutter blades are stucked open. In both cases, the simplest way is to use a powerful neodymium magnet to fix them. If the body is metallic, it's best to remove it first. Then switch the camera on and zoom in the lens to maximum. Put the magnet in contact round and round the lens tube until you see a change and remember that the magnetic polarity matters. With luck you will be able to cause the solenoid to work at least temporarily. If the change is not permanent then perhaps the flex cable is broken.

@orientalbored

9 ай бұрын

There are many possible causes, so I can't say for certain, but it seems to be the same as removing the battery and shaking the device or turning it in a figure 8 motion like with a smartphone. Also, using a strong magnet will likely affect the neodymium magnet in the camera shake unit. Others are electromagnets, so the effect is...

@himeccms893

9 ай бұрын

@@orientalbored I'll take my chance that any negative effect to the solenoid magnets and anti-shake mechanism will not be permanent. Magnetic fields become weak with even a small distance and I use plain ferro-magnet if there's a chance of permanent damage

hello there, can i ask?.. cuz my camera is work perfectly fine but the lcd is black screen but the camera doesn’t affect the inside, still working

@orientalbored

2 ай бұрын

If the photos are recorded on the SD card without any problems, the LCD may be defective. 1. Try reseating the LCD cable. (Check if the LCD itself is defective or the backlight is defective.) 2. Inquiries regarding manufacturer repairs. 3. Purchase a compatible LCD on eBay etc. and replace it yourself. (Please note whether a backlight is included) 4. Give up and buy another model.

what size of screw drivers Did You use??, I gave Up Mine Because Some Screws Are stripped and Can't Be removed

@orientalbored

4 ай бұрын

#000 or #00 or #0. Since there are several types, it is impossible to answer with this information alone. Look up other people's KZread videos on how to remove the broken screws.

@henzo.78

4 ай бұрын

@@orientalbored thanks

@henzo.78

3 ай бұрын

​@@orientalbored I already Fixed the Problem But I accidentally torn 3 Flexi Cables On The lens😢

@henzo.78

3 ай бұрын

​@@orientalbored I Already Fixed The problem But Accidentally Torn 3 flexi Cable On The lens😢

Has the same issue with my samsung es10.. do u have any suggestions on what to do?? I want to fix it by myself hahagah

@orientalbored

8 ай бұрын

I have never handled samsung es10. There are many possible causes, such as the aperture unit, shutter curtain unit, CMOS unit, and circuit board, so it is not possible to pinpoint the cause. If you have no experience in repairing cameras, I think it would be safe to contact a Samsung service center.

how to charge this one?

@orientalbored

11 ай бұрын

Use a charger. Please read the instruction manual.

thenkyu bre

@orientalbored

Жыл бұрын

hmm.