Powerful COILGUN | Magnetic Games

Ойын-сауық

This is a completely analogue coilgun, generally the ignition timing of the coil is electronically regulated to be precise and performing, I wanted to experiment with a fuse system that allows you to obtain a similar result.
The fuse system is more spectacular but very difficult to calibrate. The goal is to have the coil generate the magnetic field for only a fraction of a second, only until the projectile reaches the center of the coil. When the projectile reaches the center of the coil the magnetic field must cancel out to allow the projectile to exit at maximum speed.
Optimizing this system cost me a lot of time in testing each component of the experiment such as:
1) the distance of the projectile from the coil (for this reason the graduated barrels),
2) the dimensions of the fuse made with aluminum foil (6mm wide for the ball throw and 8mm for the pointed projectile)
3) the power delivered by the capacitors, initially I would have liked to put 4 63V 0.1F capacitors in series but having achieved a rather scary result with only 2 capacitors or preferred not to add others.
Obviously changing one of the aforementioned parameters slightly forced me to recalibrate the other 2.
I thank my friend Ferdinando for the help he gave me in carrying out this experiment
/ @ferdinandoantinoro
LIKE & SUBSCRIBE HERE: bit.ly/Sub2MagneticGames
WATCH MY TOP VIDEOS HERE: bit.ly/MagneticGamesTopPlaylist
On my channel you will find all the ways to have fun with magnets divided into 3 main categories:
Classical magnetic experiments such as magnetic levitation, homopolar motors, small magnetic weapons, Gauss cannons, gears, magnetic field viewers and much more.
Satisfaction video like the construction of magnetic sculptures, slime and magnetic putty and product review.
ASMR relaxing videos to watch but above all to listen preferably with stereo headphones to be able to appreciate the particular sounds of the magnets
Follow me:
www.magneticgames.eu/
Facebook
/ magneticgamesit
TikTok
/ magneticgames_official
Instagram
/ magneticgames_it
About Magnetic Games:
All ways to have fun with magnets.
The magnetism has always intrigued me. The strength of the magnets is scientifically explainable but there's something "magical" about its interaction with the world. My Channel offers you curious experiments and fun games to do with magnets.
Powerful COILGUN | Magnetic Games
• Powerful COILGUN | Mag...
Magnetic Games
/ kappaquellobello
#magneticgames #coilgun #electromagnet

Пікірлер: 188

  • @amazingsupermaster7757
    @amazingsupermaster77577 ай бұрын

    Amazing very amazing and dangerous experiment... But you achieve all the goals successfully...Congratulations 🎉 Best of luck ❤

  • @coledavidson5630
    @coledavidson56304 ай бұрын

    The aluminum foil fuse is a pretty clever solution to avoid expensive and complicated semiconductor setup

  • @massimodevitis6069
    @massimodevitis60696 ай бұрын

    never seen a coilgun* (wops) that uses a fuse to interrupt te currwent. it's beautiful.

  • @lusa3002

    @lusa3002

    6 ай бұрын

    Coil gun, rail gun works is diferent.

  • @hgg-ws4bc

    @hgg-ws4bc

    6 ай бұрын

    Thats a coil gun, not a rail gun

  • @UnknownZYX_4085

    @UnknownZYX_4085

    6 ай бұрын

    bruh, it literally says in the video title "powerful COILGUN"

  • @user-even-duller-brain

    @user-even-duller-brain

    6 ай бұрын

    Sir when you said railgun i now got confused...can i ask why you said railgun?

  • @andrew32155

    @andrew32155

    4 ай бұрын

    ​@user-even-duller-brain because, it's common for people to confuse anything that "Launches a projectile with electromagnetisim" for a "railgun." I think "railgun" is a more popular word because of its military connotations. And the word somehow subjectively sounds "tougher" than "coilgun." Obviously, in a railgun, the projectile actually shorts current between the rail, and Lorentz forces and the incredibly violent arc propel the projectile. Where a coilgun is essentially a toroidal electromagnet, forming a solenoid with a free moving core, and ideally, current ceases before the coil tries to pull the solenoid-core/projectile back in. It is a lot like how the Doom video game created generations of people thinking that an electrically driven multi-barrel rotary machinegun, a "Gatling" is called a "Chain Gun." Perhaps because they think the barrels fire sequentially in a chain. When an actual "Chain Gun" is something like the Bushmaster line of medium caliber (somewhere around 20-30mm) automatic cannons, like found on the US Bradley Infantry Fighting Vehicle or the chin turret of an AH-64 Apache helicopter. And the Bushmaster is called a Chain Gun because the bolt & feed mechanism is literally formed & connected and driven like a few enormous links of a bicycle or motorcycle drive-chain. And "Chain Gun" just tries to become a more universal term, because it sounds "tough." Maybe like "beating on something with a heavy chain." 🤔

  • @brokeneyes6615
    @brokeneyes66157 ай бұрын

    The title of this video should be: How to build a futuristic home defense platform on a shoestring budget.

  • @Meltz14

    @Meltz14

    5 ай бұрын

    I dunno, those caps look expensive

  • @tehbignic
    @tehbignicАй бұрын

    timing via sacrificial fuse is very novel and elegant. and spectacular! well done.

  • @rashalghul007
    @rashalghul0075 ай бұрын

    Adding some rifling in the bore and fins for the projectile would up the game 😌

  • @andrew32155

    @andrew32155

    4 ай бұрын

    It's a fascinating topic to discuss, because so mamy mechanical & physics principles are involved. Rifling a coilgun would have a good chance to get the projectile stuck in the bore, at least not without an enormous amount of force. And one coil alone is inefficient, and cannot usually accelerate the projectile much faster on its own, no matter how big or powerful its made. One has to stage a sequence of coils, each one providing acceleration in perfect sequence & timing faster and faster, usually with digital electronics & LED's making "light gates" with a photo-sensor of some sort. In an actual gunpowder firearm, and the relatively soft copper & lead of the bullet actually press-fits itself into the rifling grooves. There are obviously .177 bb's that are steel, and those airguns are rifled, but it mainly works because the bb is so tiny and light. A bigger projectile from a coilgun wouldn't pick up much, if any spin that way. And the bore contact needed only slows the projectile down through friction, unlike an airgun or firearm, where that friction also provides a seal, and gets more work out of the expanding gas, which overcomes the friction in a useful trade-off. Fins and aerodynamic drag stabilization is a better idea, but still complicated. There's certainly a ton of 12 & 20ga non-spinning shotgun hunting slugs that work on the principle. However, with a coilgun, there's some limitations. You need ferrous metals for the projectile, or at least a significant amount, so the magnetic forces in the coil will make it will move. This means you need a longer projectile than a lead one to get the desired mass. And the longer rod-like projectile is better at being moved by the magnetic force in the coil too. The problem is getting useful fins on a projectile that cannot be wider than its body in the bore. Fins that taper within the diameter of the body can work, sort of like the elongated tip of a Phillips screwdriver, but unlike visibly protruding fins like a more traditional arrow or ricket shape, they do so poorly. Backwards flip-out "knife fins" like the tail of a little mini RPG grenade would work, but be insanely complex to make. It's possible to configure the coils and projectile to impart spin through magnetic forces along with the main driving force pulling the projectile forwards, but that's very difficult & complex too.

  • @sapereaude155
    @sapereaude1554 ай бұрын

    New idea: Magnetic artillery

  • @Kereusx
    @Kereusx7 ай бұрын

    This one aint a toy but a real weapon

  • @ZombieSlayerBO2

    @ZombieSlayerBO2

    4 ай бұрын

    35mph 8mm steel ball might bruise a squirrel. That’s about it

  • @w1111-vs3dd

    @w1111-vs3dd

    2 ай бұрын

    ​@@ZombieSlayerBO2bro not everyone's skin is made of tungsten

  • @gus473
    @gus4737 ай бұрын

    Excellent build and slo-mo camera work! Satisfactory marksmanship. 😉🤣✌️😎

  • @tom-on
    @tom-on7 ай бұрын

    love the foil fuse

  • @PuretyLead-bg5wv
    @PuretyLead-bg5wv3 ай бұрын

    Many thanks for your efforts sharing this.

  • @NetherWolfAlpha
    @NetherWolfAlpha7 ай бұрын

    how to murder someone with magnets

  • @OOver-_-OO

    @OOver-_-OO

    7 ай бұрын

    there is GR-1 ANVIL

  • @bitonic589
    @bitonic589Ай бұрын

    You should not wind your coil backwards, it decreases your strength. When starting a new layer, wind to the start once, and start winding forward again. When you wind backwards, it cancels out, making it the strength of only 1 layer with increased resistance.

  • @supposeitexperiments
    @supposeitexperiments4 ай бұрын

    very nice video, i was not expecting that the coilgun will really working, but it is really working 👍😀👍👌😂

  • @edwingrandas745
    @edwingrandas7457 ай бұрын

    Increíble como se vaporiza el aluminio 😮

  • @TuncayAyhan
    @TuncayAyhan7 ай бұрын

    lmao. my guy made a deadly weapon, not knowing it's a deadly weapon

  • @ek0611_theGamer4L
    @ek0611_theGamer4L25 күн бұрын

    “the first gun was invented in the year 1000” *people in 999:*

  • @Dimabuxaet
    @Dimabuxaet2 ай бұрын

    You can also use the magnetic field from big coil to brake the circuit.

  • @lidotrijsturis
    @lidotrijsturis5 ай бұрын

    with a 30lb bow i can do more damage to a sheet of foam at 30m. But as an experiment - very interesting, good work

  • @DrMJT
    @DrMJT7 ай бұрын

    Make this with a ten metre diameter hole and the length of the coil in a circle with a diameter of at least 100km. A payload 'packet' could be accelerated around and around, sufficient number of times, until the packet payload had orbital velocity... It would be a very cheap, effective, efficient - method of launching things from Earth into Space. The circle of coils of wire built below ground with a divert tube at 45 degrees (use a mountain) to get more elevation. I have been describing this for decades but no one seems to be interested in the ability to launch many tonnes into orbit for just the cost of a little electric current!

  • @MRNDESO-ps7bz

    @MRNDESO-ps7bz

    7 ай бұрын

    😂😂😂👍👍👍👍

  • @rokaq5163

    @rokaq5163

    7 ай бұрын

    "A little" electric current which would be enough to power entire cities for a single launch doesn't seem very cost effective, even less so given the insane infrastructure needed to properly have it launched. You're pretty much describing an open-ended mass accelerator. Not particle accelerator, mind you, but MASS accelerator. Go take a peek at what the LHC cost and multiply that hundredfold, at least. It's just not viable, and this idea has been pitched before to no avail due to energy and budget constraints. Engineering is the art of adjusting to constraints and making the most of what's available. And that includes costs of all types, be it energetic or monetary.

  • @1islam1

    @1islam1

    6 ай бұрын

    @@MRNDESO-ps7bz ⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran

  • @r5a773

    @r5a773

    5 ай бұрын

    А в космосе ты как ловить будешь???

  • @DrMJT

    @DrMJT

    5 ай бұрын

    @@r5a773 Основная средняя школа Класс естествознания Образование: Земная гравитация хорошо! Если ракета запускается с поверхности Земли, ей необходимо достичь скорости не менее 7,9 километров в секунду (4,9 миль в секунду), чтобы достичь космоса. Эта скорость 7,9 километров в секунду известна как орбитальная скорость. Для запуска с достижением земной гравитации Ну, иначе говоря, скорость убегания составляет 11,8 км/с... «Скорость убегания» - это баллистическое требование, поэтому, если вы стреляете пулей с поверхности Земли, по крайней мере, если она не летит от Земли Со скоростью 11,8 км/с он будет постоянно замедляться под действием земной гравитации (почти постоянное отрицательное ускорение) и никогда не покинет земную гравитацию.

  • @J0ermungand
    @J0ermungand7 ай бұрын

    I would've liked seeing you vary the thickness of the sacrificial aluminum strip. Could've optimized energy transfer to the projectile that way.

  • @RickGrimes807

    @RickGrimes807

    7 ай бұрын

    Why don't you do it?

  • @J0ermungand

    @J0ermungand

    7 ай бұрын

    @@RickGrimes807 because I don't have a bank of supercapacitors and powersupply to do this

  • @tempjadho

    @tempjadho

    5 ай бұрын

    Hi would you like to explain how you could do that.

  • @SANTOSHKUMAR-zo4ef
    @SANTOSHKUMAR-zo4ef6 ай бұрын

    This idea was literally amazing ! i will try it out too

  • @MagnetTricks
    @MagnetTricks7 ай бұрын

    Very cool project!👍👍

  • @doubleooh7337
    @doubleooh7337Ай бұрын

    Have you tried it with higher voltage capacitor instead?

  • @husseinwassim9812
    @husseinwassim98125 ай бұрын

    at 1:43 till 1:44 if u play the video using" , " key and "." key you can see the coil get tighter right when the spark happens and at 2:10 to 2:11 the coil guns moves back like it has recoil

  • @ayahsadam9817
    @ayahsadam98172 ай бұрын

    amazing💖👍

  • @andrew32155
    @andrew321554 ай бұрын

    Hmmm... besides providing a useful current cutoff that stops the coil from trying to pull the projectile back in, I wonder if the explosive foil fuse... it provides a fast rise-time spike in voltage/current as well, that makes the coil more efficient? 🤔

  • @tristancanaleta2966
    @tristancanaleta29662 ай бұрын

    May I know the list of materials that you used? Thank you!

  • @user-rc7lk2vq8l
    @user-rc7lk2vq8l29 күн бұрын

    Linear synchronous motor This is my graduation project in several stages

  • @BanriFerdinand
    @BanriFerdinand4 ай бұрын

    con este invento podré lanzar un Nokia 3310 al espacio y destruir con el planetas.

  • @Kapalek84
    @Kapalek847 ай бұрын

    nice!

  • @grimyhq3807
    @grimyhq38074 ай бұрын

    Now find a way to compact it all together into a gun

  • @frommarkham424
    @frommarkham4244 ай бұрын

    I calculated, and the whole setup used 99 joules of electricity per fire. The maximum kinetic energy of the bullet was only 0.5 joules, yielding an energy conversion efficiency of an embarrassing 0.5%.

  • @w1111-vs3dd

    @w1111-vs3dd

    Ай бұрын

    That's why railguns are used. Also, it's a gun not a transformer.

  • @The-Mad-Taoist
    @The-Mad-Taoist6 ай бұрын

    Can you do the same with a spark gap?

  • @Fernando-bq2oq
    @Fernando-bq2oq7 ай бұрын

    Genial ❤❤❤

  • @davidn.s4502
    @davidn.s45024 ай бұрын

    Mis respetos

  • @jorgerosales1761
    @jorgerosales17614 ай бұрын

    Instead of cans experiment with meat, also it would be interesting to see different sizes of coils and its force

  • @halityagloglu6258
    @halityagloglu62586 ай бұрын

    Amazing very amazing . ongratulations 🎉 Best of luck ❤

  • @sulfur-fg1go
    @sulfur-fg1go7 ай бұрын

    コイルガンって設計することが意外と難しいんですよ 大きいコンデンサ(青い円筒形のやつ)と、コンデンサ容量と弾体の大きさに見合った適切な大きさのコイル、大電流を少ないロスでオンオフできるスイッチング素子などを用意して、それらを完璧に発動させることがとてつもなく難しい。 さらに引き込み型コイルガンの場合、弾体を発射するときにコイルに電流が流れっぱなしだとブレーキになって初速が爆下がりするから弾体がコイルの中央を通過するまでにどうにかして電源を遮断しないといけない。この人はそれをアルミホイルでやってるのが素晴らしいアイデア。 この装置すごいですよ。作ろうとして諦めたことある僕がいうから間違いない。

  • @MagneticGamesIT

    @MagneticGamesIT

    7 ай бұрын

    Thanks ... To find the right configuration I made about a hundred attempts

  • @user-kq1tz1qf8h

    @user-kq1tz1qf8h

    7 ай бұрын

    единственно верное решение поставить в центре тот самый контролёр! который будет говорить объекту , тут середина. все довольно просто, катушка в виде песочных часов.

  • @razorintube
    @razorintube6 ай бұрын

    brilliant job

  • @tonystarks315
    @tonystarks3154 ай бұрын

    You should use a water melon with the linear accelerator mass

  • @lvxleather
    @lvxleather3 ай бұрын

    Cool 😃

  • @exisfohdr3904
    @exisfohdr39043 ай бұрын

    Instead of wrapping the coil wire back and forth, try a single coil, then wrap a completely different coil on top, then a third, ect. Run the coils in parallel. This will increase the acceleration as the current will flow through all coils simultaneously and in only one direction. With the demonstrated setup, the magnetic field travels forward, but then backwards, acting as a damper. Additionally, coils in parallel reduce the overal resistance, allowing more current to flow. More current means stronger magnetic field.

  • @MagneticGamesIT

    @MagneticGamesIT

    3 ай бұрын

    Thanks for the tip

  • @exisfohdr3904

    @exisfohdr3904

    3 ай бұрын

    @MagneticGamesIT you can also overlaping the individual coils but will need a more complex timing sequence for initialization. This would require separate capacitor banks for each coil as well.

  • @riv0564
    @riv05644 ай бұрын

    There was a good missed chance to shout "LORENTZ FORCE, GO!" while pulling the lever 😔😔😔

  • @quellenathanar
    @quellenathanar6 ай бұрын

    I like the aluminum foil fuse, however, a "spark gap" switch/or fuse may allow for even more power, and briefer circuit connect time (I'm sure there is a more accurate phrase for this).

  • @TheLurker-XYZ

    @TheLurker-XYZ

    5 ай бұрын

    Spark Gap is the correct term.

  • @quellenathanar

    @quellenathanar

    5 ай бұрын

    @@TheLurker-XYZ Thanks.

  • @uttu_tri

    @uttu_tri

    5 ай бұрын

    Can you tell me please that the used electricity in circuit is AC current or DC current...?

  • @quellenathanar

    @quellenathanar

    5 ай бұрын

    @@uttu_tri I'm gonna have to say DC.

  • @uttu_tri

    @uttu_tri

    5 ай бұрын

    @@quellenathanar and the reason behind using dc is? I'm trying to make a working model on it , basically a small and safe railgun model for school , but I'm pretty confused with currents , I don't want to destroy my school's circuit 🙂

  • @Debbiebabe69
    @Debbiebabe694 ай бұрын

    How do these coils work? Surely the whole thing is touching and conductive, so electricity would just flow in a straight line from the + wire to the -?

  • @dntfrthreapr

    @dntfrthreapr

    3 ай бұрын

    the wire is coated in an insulating polymer

  • @baconoidguy3346
    @baconoidguy33462 ай бұрын

    Are the foils acting as fuse?

  • @shortriderfamily4224
    @shortriderfamily42246 ай бұрын

    Hii sir I can automate this using embedded technology

  • @user-yp8ko2cy9j
    @user-yp8ko2cy9j2 ай бұрын

    Me encanta 👍👍👍👍👍

  • @ferdinandoantinoro
    @ferdinandoantinoro7 ай бұрын

    Fiko sto video.

  • @BangboSeries-hl6je
    @BangboSeries-hl6je6 ай бұрын

    Wow.. Brilliant 🎉

  • @arielrizu
    @arielrizu6 ай бұрын

    Why not try using relay high amp

  • @human3444
    @human34446 ай бұрын

    Does the fuse have to burn to generate energy?

  • @Eviel1n

    @Eviel1n

    6 ай бұрын

    The fuse is there to quickly kill the electromagnet. When the projectectile is "behind" the coil and the magnet is activated, it's being accelerated in the correct direction - down the barrel. However, if the magnet were left on the whole time, as the projectile passed the center of the coil, it would start to be pulled backwards and ultimately stopped in the barrel rather than flying out and striking the target. You can see them demonstrate this at the beginning of the video. Switching is one of the issues with coilguns. Theoretically, they have some big advantages over railguns. In practice, however, the challenge of being able to quickly and precisely power up/down the sections of a multi-stage coilgun is a major headache that's limited their speed thus far.

  • @human3444

    @human3444

    4 ай бұрын

    @@Eviel1n Thank you vary much. 🙏🌹❤️

  • @vinn7930
    @vinn79306 ай бұрын

    Can It Throw Projectiles As Small As 3mm Nails?

  • @MagneticGamesIT

    @MagneticGamesIT

    6 ай бұрын

    Sure

  • @sasha3856
    @sasha38564 ай бұрын

    at 0:36… how can be current passing trough the wire of there’s not any power source?

  • @PuretyLead-bg5wv
    @PuretyLead-bg5wv3 ай бұрын

    Like to ask questions, magnetic Games How many turns of coul on how many diameter (mm) of iiron core (Hole) Voltage applied? If you can also, it draws up to how many amp? What's the length of the coil core with layers? Many thanks From Nigeria New in electronics

  • @MagneticGamesIT

    @MagneticGamesIT

    3 ай бұрын

    I used 1kg of copper wire 1.5 mm

  • @klauslaus2535
    @klauslaus25355 ай бұрын

    Due to the unstable structure of the electric coil as a cannon, a lot of energy is lost.

  • @user-nw2of9mt6o
    @user-nw2of9mt6o5 ай бұрын

    Ртуть жидкая+киноварь порошек+золото+ медь+ магнит и разряд от зажигалки пьезовой.

  • @user-gm7cr3wh9n
    @user-gm7cr3wh9n7 ай бұрын

    とにかく穴をあけたい時に便利ですね👍

  • @Das_Red
    @Das_Red9 күн бұрын

    Now let’s add fins and stuff for that rod…

  • @user-kv6lw4cp4u
    @user-kv6lw4cp4uАй бұрын

    فكره حلوه ❤

  • @ochaparro1335
    @ochaparro13356 ай бұрын

    Amazing

  • @zx3215
    @zx32156 ай бұрын

    Some time ago I was trying to make something like this, but I wanted to use Arduino-controlled relays. Alas, I was unable to suppress the back current (tried various diodes, no avail), it was baking the relays as they start opening open.

  • @simontay4851

    @simontay4851

    5 ай бұрын

    Use a high current, low voltage MOSFET.

  • @thegreenmage6956
    @thegreenmage69563 ай бұрын

    Nice. Bring it to Fallout 4 mods 👍

  • @user-kq1tz1qf8h
    @user-kq1tz1qf8h7 ай бұрын

    так теперь это оружие? магнитно электронное? электромагнитное?

  • @dakshrana6337
    @dakshrana63372 ай бұрын

    how much watt it consumes for 1 hit can

  • @bose9618
    @bose96185 ай бұрын

    Could someone explain why are the two capacitors needed?

  • @w1111-vs3dd

    @w1111-vs3dd

    Ай бұрын

    do you know why capacitors exist? it's so a lot of power can be released at once

  • @tioagustian71

    @tioagustian71

    9 күн бұрын

    The capacitors are connected in series, which means the voltage is twice that stated on the capacitor body. In the video he uses two 63v capacitor, 63v + 63v = 126v maks. more voltage = more power.

  • @w1111-vs3dd

    @w1111-vs3dd

    8 күн бұрын

    @@tioagustian71 in this case, yes, it is more power, but more voltage just means the power is released faster. if you have one capacitor and another with the same capacity but at a higher voltage, it's the same amount of power, it's just released faster

  • @affinnen
    @affinnen5 ай бұрын

    Nice project, where did you buy your copper wire and what gauge was it?

  • @jjk4740

    @jjk4740

    5 ай бұрын

    brother why you want to know 💀

  • @thetimeoftheendii1586
    @thetimeoftheendii15867 ай бұрын

    Cool!

  • @tvbox8478
    @tvbox84787 ай бұрын

    👍👌

  • @PharmaEngineeringMech.Elec.
    @PharmaEngineeringMech.Elec.4 ай бұрын

    👌👍

  • @BeingFireRetardant
    @BeingFireRetardant7 ай бұрын

    The world's most innocuous gauss cannon tutorial, part 2...

  • @user-ss9yp4zr1f
    @user-ss9yp4zr1f5 ай бұрын

    Адронный коллайдер так же работает вроде

  • @JC-ns6io
    @JC-ns6io6 ай бұрын

    Hey ! What camera are you using to get such slow motion?

  • @MagneticGamesIT

    @MagneticGamesIT

    5 ай бұрын

    A Sony rx 100

  • @fedorrodif3732
    @fedorrodif3732Ай бұрын

    Таак, ну это только гладкоствольное. А какая мощность нарезного такого "ружья"?...

  • @yuri_klyukin
    @yuri_klyukin6 ай бұрын

    Простенькая электромагнитная Гаусс пушка😁

  • @MUSICMANNY3
    @MUSICMANNY3Ай бұрын

    Don’t show this to da opps 🤫🤫🤫

  • @roquecrafter
    @roquecrafter4 ай бұрын

    Fire in the hole 🗣️🔥🗣️🗣️🔥🔥🗣️🗣️🔥🗣️🔥🔥

  • @user-my1en8fv1d
    @user-my1en8fv1d4 ай бұрын

    It's dangerous thing

  • @Days-ts2xs
    @Days-ts2xs6 ай бұрын

    This could be the gun used in the future but more compact

  • @user-ei8vz8xy1j

    @user-ei8vz8xy1j

    6 ай бұрын

    where gun fire now silenced (which cause mass shooting harder to notice)

  • @w1111-vs3dd

    @w1111-vs3dd

    Ай бұрын

    Railguns are more efficient, they use repelling force instead of attracting force, which allows them to use all of the coil's power instead of just half.

  • @odiedodieuk
    @odiedodieuk7 ай бұрын

    Is that some kind of capacitor to the right of the switch? Edit no it seems more like a fuse. What is it?

  • @cikcirik8264

    @cikcirik8264

    7 ай бұрын

    the aluminium foil acts as a fuse, the blue ones are the capacitors

  • @mubeenmdmubeen5107
    @mubeenmdmubeen51076 ай бұрын

    This is light speed

  • @99.99
    @99.997 ай бұрын

    WOW! Awesome 👍 One of these days you'll get snatched off the street by the men in black 😆

  • @tapuout101
    @tapuout1012 ай бұрын

    You got to tie the launcher down. Youre losing power on the kick back? 1000 fps is insane.

  • @waelnour7147
    @waelnour71472 ай бұрын

    لو سمحت اشرح كيفية تركيب التجربة بالتفصيل

  • @Sedgewise47
    @Sedgewise477 ай бұрын

    🤔Well… There’s no “fire” in _that_ “arm”! 😏…

  • @spbuddhikaspbuddhika8524
    @spbuddhikaspbuddhika85244 ай бұрын

    👍👍👍👍👍👍👍

  • @user-bd3vb6mc2x
    @user-bd3vb6mc2x3 ай бұрын

    Эфиопы рулят 😂

  • @AR2-15
    @AR2-155 ай бұрын

    The author of the video, how many joules does the projectile of this cannon have? Thank you in advance

  • @Michael-oq2wx
    @Michael-oq2wxАй бұрын

    Let's try 1000V, 16000uf

  • @Dalipfunnyfun
    @Dalipfunnyfun6 ай бұрын

    🙄क्या ये बहुत शक्तिशाली है ?? 🤔

  • @jayeshkulkarni3716
    @jayeshkulkarni37166 ай бұрын

    Diwali special video make you

  • @Laosthaitech
    @LaosthaitechАй бұрын

    Your clips are very interesting. Nice to follow and exchange fun and new knowledge. Hope you will increase our following as well. Thank you very much.

  • @dinodelfavero
    @dinodelfavero6 ай бұрын

    Bello e molto ben fatto, l'unica cosa che migliorerei è l'ancoraggio dell'avvolgimento, si vede chiaramente che l'avvolgimento indietreggia e questo fa diminuire, anche se di poco, la velocità del proiettile. Si potrebbe migliorare ancora cercando il punto "perfetto" dove posizionare il proiettile, facendo varie prove anche variando il "fusibile" così da trovare il miglio compromesso 🙂 Bel lavoro!

  • @MagneticGamesIT

    @MagneticGamesIT

    6 ай бұрын

    Grazie. Ti assicuro che per trovare questa configurazione ho dovuto fa molti test sia sulla posizione del proiettile che sulle dimensioni del fusibile. Non dico di aver trovato la configurazione perfetta ma di test ne ho fatti un centinaio. Minime variazioni producono grandi differenze nel risultato.

  • @doublebubble9823
    @doublebubble98235 ай бұрын

    Do you know, who is Gaus? 😉 And try to imagine the name of this gun 🤦

  • @Den-po5py
    @Den-po5py6 ай бұрын

    Тиристор нужен на сотни ампер , тогда фольга алюминиевая не нужна , и искриться не будет

  • @SIM31r

    @SIM31r

    4 ай бұрын

    Транзистор нужен.

  • @sararumianek3136
    @sararumianek3136Ай бұрын

    please teal me distance 😂

  • @Andrei_Mishurov
    @Andrei_Mishurov7 ай бұрын

    Принцип электромагнитной пушки

  • @anitatank-uq2qe
    @anitatank-uq2qe3 ай бұрын

    🙏🇮🇳

  • @samuelfellows6923
    @samuelfellows69236 ай бұрын

    😠 I’ve been click-baited ~ with a photoshopped clip of a very unrealistic/dangerous looking, of him trying to catch the projectile [if that was real he would have it lodged in his hand ⚠️😬😖]

  • @privat0177

    @privat0177

    6 ай бұрын

    Welcome to KZread

Келесі