The kids are going to enjoy riding.

sweet MOD! your channel has my support!

@daveprototype6079

6 жыл бұрын

Thanks

I watched other videos of these things they are pretty wild how you can modify them :D

Thanks i learned a lot my kids will be happy thanks again

@daveprototype6079

4 жыл бұрын

awsome

I was pretty surprised to see that the stock motor spun so much faster. ......but as you mentioned...that's free load speeds.

Very informative, thank you for the videos, I am curious how to switch the small gear on the motor shaft that connects to the large gear inside the gearbox. Is that small gear called a pinion? When looking at the replacement motors online they don't see to have that small gear they are just a round shaft.

@daveprototype6079

3 жыл бұрын

You need to heat is up with a lighter and pull it off its a press fit; then press it on to the new motor. Remember there is a plastic washer behind the gear so not to much heat.

@thecorinthianfarm

3 жыл бұрын

@@daveprototype6079 thank you!

Me gustaría saber mejor de la información pero en español si se puede x q no se inglés y gracias x compartir la información

I want to put two 350w motors in my sons police car but I knew these gearboxes were cheap. It would be nice to find aftermarket boxes with all metal gears

@daveprototype6079

3 жыл бұрын

The way the torque is distributed through the gears; only this gear needs to be metal and the rest hold up great after the torque is reduced through the gear set.

If I apply 18v to a stock motor, would that be problematic? I.e swapping a 6V stock battery to an 18V Milwaukee drill battery? I ask because I see all these videos on YT where guys are just swapping the battery, but won’t that just burn out the motor? Thanks, great videos btw!

@daveprototype6079

2 жыл бұрын

There should be no issue with the motor; my mods were to 24v.

@johanv4668

Жыл бұрын

is there no problem with this higher voltage for the electronics ? like the remote control ?

SORRY off subject but What happened to the press frame built.

@daveprototype6079

6 жыл бұрын

That project got completed; I just didn't see a lot of interest in it on line. I can do a video on it and all the attachments I made for it

What is the rpm of these 775 motors? I look on ebay and they are only 9000 rpm at 24v. Bought them and they run very slow. Even at 24v the 775 motor i bought run maybe 3 mph max.

@daveprototype6079

2 жыл бұрын

I am not sure of the RPM's as this project was quite some time ago. I do mention that the OEM motors were much faster but also more $$$$

How can I tell which side on the motor is positive and negative if it is not labeled?

@daveprototype6079

2 жыл бұрын

They are DC motors once you hook them up they will either go forward or backwards; check with the controls hooked up

you sound native american in the beginning. Overvolting a 12v motor to 24v will be faster than running a 24v motor at 24v. Since your new motor is bigger it will have more torque even with less volts but the speed won't be as fast.

@djpedro1927

3 жыл бұрын

Hi iam about to order those motor But should I use 18v or 24 v

@daveprototype6079

2 жыл бұрын

both are good choices; let your budget guide you

It would be nice if the 1st &2nd gears were both steel

@daveprototype6079

4 жыл бұрын

yes; they are made to wear out

Jimmie Stewart lol 😂

@daveprototype6079

2 жыл бұрын

LOL

Throw a bigger battery on it.

@daveprototype6079

6 жыл бұрын

What do you mean bigger??

@officialdieselstudios2251

6 жыл бұрын

Throw a full size car battery on it. More speed more power!!! He He He He!

I was pretty surprised to see that the stock motor spun so much faster. ......but as you mentioned...that's free load speeds.