Useful Tools: Horus Works Products: www.amazon.com/s?me=A23TUQ68U... Pulley Kit: www.ebay.com/itm/333842223157... Power Steering Pump Seal Kit: www.rockauto.com/en/moreinfo.... Fluid extractor: au.jbtools.com/mityvac-mv8510... Please Subscribe If You’d Like To See More DIY Videos and thanks for watching :)

@orlandodavidson6011

10 ай бұрын

Is there a gasket in the lower hose wheb I tightened mine 2vmax my hose is still loose

Excellent video. I’ve worked on cars a lot over the years, and I learned some tricks watching your video, Thank You! I really enjoy the fact that your video treats me like a calm adult….no yelling, no blasting loud music, no unneeded sensationalism to get the point across. Gives me interest in what else you have! Love the idea of the crows-foot….sometimes a guy can miss the obvious.

@Horus_Works

5 ай бұрын

Thank you my friend, I'm glad to see you enjoy the videos. I try to keep them honest, and without B.S. 👍

Hi, great to see the Focus again, and a well detailed repair as usual.🙂👍

@Horus_Works

Жыл бұрын

More to come!

This guy is pure! Very nice (How to) video. Good Job!

@Horus_Works

Жыл бұрын

Thanks - I appreciate your support 👍

Wow. Step by step pump rebuilding process. Thanks for your work and enthusiasm. Thumbs up! My next project is a rear axle spacer, motocnc piece, just like in you Focus. Take care!

@Horus_Works

Жыл бұрын

You can do it! And thank you for your support!

@flycorvus

Жыл бұрын

@@Horus_Works Ofc! As a matter of fact, I've just finished the axle spacer project in my Focus. One question for this PS rebuild: what's the seal kit you used? You should link that too. :-))

@Horus_Works

Жыл бұрын

@Én egymagam no problem at all 😀 I have listed the seal kit now. Also here is the link: www.rockauto.com/en/moreinfo.php?pk=79564&cc=1385557&pt=7407&jsn=921&_nck=ZExt1ysfqhqWnq%2BEvUNdS7iHfMpzWLHEo8sgxbjpCuUoyawQXW5Tl320C3lrzeAusHMVI75qCWfQcITWlxcg2RV86QHgrlA96cgyddELARi42tqKPWvpCecErhBR9l9e0PYZLYcHkqK4ArHGF0d%2FNmTL9nEPXzymAW6LrPAsE9qqwqhHlbaewWuE3usr2aor%2B7%2FLIOk%2BdWPOq2STPpWVeofQ9LztNLMu%2BJ5LSKT39uWJQ46hk0o%2BSG3Ye66yKWHtM8gdE4A83nGBle2MUTxm6AzfPvkqzsPuD8YYHX4mq1TcgZLtt8TtDfy%2FtlUj1VnB2dczLhYWdKLTyNev7aPOog%3D%3D

Eres mi ídolo. Me gustaría tener el sitio ideal para realizar los trabajos como tú los haces. Enhorabuena como siempre

@Horus_Works

Жыл бұрын

Gracias amigo mío. No tengo mucho espacio, pero encuentro que una buena organización ayuda. Agradezco su apoyo :)

It's been a while since you worked on the Focus. Cheers mate 👍

@Horus_Works

Жыл бұрын

Yea it's been busy here, but thanks for sticking around! 👍

All fixed! Good job 😊

@Horus_Works

Жыл бұрын

Thanks 👍

Mate i'm from Greece owner a ford focus mk1 i'm wathcing your videos doing similar jobs in my focus too,your doing very nice useful videos .I have a proposal for you to make head gasket video and piston rings replacement! Thanx keep walking mate wish all the best from Greece and Australia!

Love the new wheels!

@Horus_Works

Жыл бұрын

Thank you legend!

Great job as usual👍. I like the rims.. Funny how I've bought ST170 wheels from UK for my silver 3dr, I know how it'll look now ! My car in for a big upgrade for a few weeks , cams exhaust, fiesta st brakes and knuckles, front lower arms . My car seems to be the evil twin of yours hehe

@Horus_Works

Жыл бұрын

I'm very jealous!! hahaha - please let me know how the Fiesta ST setup works out - I'd be keen to hear about that :)

Thank you, again!

@Horus_Works

Жыл бұрын

No worries!

I have same same leak!! It is the Upper Sump Gasket from what I can see, it involves removal of catalytic converter brackets, some A/C Compressor bolts, the oil pan, oil feeder (will need a replacement gasket too) and a rear mount bracket. All to get to one gasket which is located between the block skirt and lower crankcase! So far, I have removed and replaced half the exhaust brackets due to rust. So have used high heat paint to try and protect the new brackets. Might fully remove the cat and paint it while i'm at it but need to get the mother of rusted bolts off first... Anyway, you do a video when you sort that out, and I'll follow it once I got the exhaust off 🤣🤣🤣

@Horus_Works

Жыл бұрын

Great info!! Yeah it could be that gasket. On more than one occasion (engine mounts mainly) I've supported the engine on a jack via the sump, so things maybe have been over-squeezed a few times.

@jobeblogs4539

Жыл бұрын

@@Horus_Works Apparently they typically go on the corners or on the semi-circle areas. Check the bell housing drain as well for engine oil... It's a case of good design at the expense of reduced gasket longevity.

@javontaysmith2053

Жыл бұрын

I have a 2000 Ford Focus SE . I’ve went through 2 pumps until I googled about history on the car & found the oil type was changed 5W-20 (All TEMPS) - This specification has been updated from ((5W-30 to 5W-20 per a Technical Service Bulletin from the manufacturer 5W-20 is the preferred viscosity. )) Then I found online (All power steering systems built after 1998 require the use of MERCON V fluid.)) after I blew the 1st & replaced to the 2nd & used that I had no problem no problems…

@Horus_Works

Жыл бұрын

@@javontaysmith2053 that's interesting, this is the first time I've ever heard of this. Can you share the link?

easier job on the ford puma MK1 cause the power steering pump is at the top but brilliant video I love your content 👍 the shirp sounds like the belt tensioner is on its way out I just replaced mine and it's nice and quiet again

@Horus_Works

Жыл бұрын

Thanks a lot mate, I appreciate you saying so 👍 Hope the vids help.

I found removing the headlight made access to the high pressure line easier

@Horus_Works

Жыл бұрын

Thanks for the tip Gary 👍

Hi mate thanks for doing that video, very helpful. One question, where did you get that union nut seal/O ring from? Was it part of the kit? I have a Ford Transit VJ and have a new pump to put on, but seal not included. I can only seem to find them with the nut included. The Rockauto site doesn't even list the Transit as an option, which is weird. Cheers.

@Horus_Works

Жыл бұрын

Hey Gavin, yep all the o-rings were included in the kit that I bought. I'm not sure if they have Transit vans in the States... so that may be why the car isn't listed? My Ford Courier ute here, is actually a Mazda B2200 over there.... My Ford Focus Zetec here is a Ford Focus ZX3 over there... In any case, just make sure your pump is identical to mine (this Ford pump came on a lot of models), and you should be okay.

New wheels! ❤

@Horus_Works

Жыл бұрын

I was torn - really loved the old MP3s but this is a nice change.

Thanks bro! My steering pump is making the same noise, but the problem is with a leak in the steering rack! 😓

@Horus_Works

Жыл бұрын

Ah that's a shame... sorry mate, that might be rack out! Unless it's a hose connection, you may be able to get away with new just new washers then... Good luck 💪

Hi thank for the tips on repair pumb . That car were you working on . Is that pumb similar to ford escape...p

@Horus_Works

4 ай бұрын

Hi Gilbert, thanks for watching. I don't have a Ford Escape so I can't check unfortunately. A lot of Fords did use this pump. Have a look in the engine bay and see if it's identical to mine 👍

I'm struggling to fit back the power pression line couse I'm not find the right o-ring gasket to fit back, do you know which size is? Is teflon material? My pump keep loosing all the oil

@Horus_Works

4 ай бұрын

Hi yes, it is a teflon material not rubber. From memory I believe the new seal came in the rebuild kit that I bough for the power steering pump. If you can't find a teflon seal, maybe try using lots of teflon tape. This is where I purchased the kit from - good luck: www.rockauto.com/en/catalog/ford,2001,focus,2.0l+l4+dohc,1385524,steering,power+steering+pump+seal+kit,7407

Is that the right size teflon seal that you put on the high pressure line? There are 3 teflon seals in the kit I got, but 2 are way too big and one is slightly too small to drop on . I've seen seal installer tools that stretch teflon seals slightly so they go over the threads, then sit in a groove between the thread and the hex. Did you need to stretch the seal to get it on the fitting?

@Horus_Works

3 ай бұрын

Hey Andy, yep, the teflon seal that came in the power steering pump rebuild kit fit perfectly - and yest it was snug to put on. My rebuild kit had a couple of spare seals too, and I think they are there for other steering pump rebuilds - maybe the kit caters for more than one type of power steering pump. On this Focus Mk1 the teflon seal I used was tight to put on, I had to wind it over the threads to get it to seat at the base of the bolt. And confirming that after over a year - no leaks whatsoever. Hope that helps and thanks for your support 👍

Hey mate, I have the 2003 1.8l LX. I am getting a loud clunk/click from around the area the power steering pump is. Could it be a bearing on the pulley? any thoughts? The noise happens every 30 secs to a minute. Its not constant. Appreciate any advice! loving the content too! great work!

@Horus_Works

Жыл бұрын

Hey Clint, thanks for your support mate. The power steering doesn't have a bearing as such, as the p.s. pulley is pressed onto a solid metal shaft that's being rotated by the belt, so it can't be a bearing noise from the power steering system. If the noise isn't constant, I would doubt that it's a bearing from any another pulley either, as you would hear it every half a second or so. One thing that comes to mind, is maybe you have something lodged in your power steering fluid? That debris may then be making a noise as it circulates though the system. Just my thought from afar. Try to pin down where the noise is coming from, and if it is in the p.s. system, I'd bet it's something like that. The dirt/fragment wouldn't have to be big to create a noise, as the tolerances in the pump are very tight. A comprehensive fluid flush will probably solve it if this is your problem.

@clintcocliff6216

Жыл бұрын

@@Horus_Works Thanks heaps for the reply mate. I am doing all three engine mounts, throttle body clean and general engine bay clean next weekend. Ill have a good look around and try pin point! Cheers

@marcjeee5380

Жыл бұрын

@@clintcocliff6216 Hey Clint, I don't know if you've solved your problem already, but it sounds like it could be the same problem I'm having with mine. I've narrowed it down to the AC compressor, and it could be simply that the AC system doesn't have enough refrigerant in it. Here's an example if the issue I'm having. Look at 2 min 19 seconds: kzread.info/dash/bejne/X3-Yk9SYesSYk5s.html Might be, but not sure if it's the same in your case.

You can go for the steering machine itself. Cause you will find metallic debris there too ;)

I see you have put in silicone hoses. I'm thinking of doing the same. Please tell me what you think of them.

@Horus_Works

Жыл бұрын

Hey mate, the hoses are great. No issues so far at all. Being silicone, they should last a lot longer than rubber hoses, but they are pricier. There is a video I made of me putting them on while swapping out the water pump, thermostat, coolant flush, etc. kzread.info/dash/bejne/naiOu5RyhruZaZM.html

Hi awesome video, where did you buy your power steering pump? My leak is coming from the bottle. My mechanic changed the pump with a used one and we're experiencing the same problem. When the car starts, the fluid escapes from the mouth of the bottle.

@Horus_Works

Жыл бұрын

Glad you liked the video 👍 I bought the spare pump from a junkyard, and rebuilt it with the seal kit in the video.

@ktalservices3709

Жыл бұрын

@@Horus_Works oh ok thank you!

Why my both radiator fans turn on on high 5 sec after start up engine? Temp gaug shows low and stay low all the time. Cabine heat after 5 10 min drive regulary very hot

@Horus_Works

Жыл бұрын

It may be a fault with the fans themselves or the relay I would guess.

Is that little teflon thing the only seal this pump has? Doesn't it have any o-rings inside or an oil seal in the shaft?

@Horus_Works

17 күн бұрын

From memory that's it... but this was over a year ago so don't quote me on that... In any case, I've shown the whole process so hopefully that helps clear this up. The kit was good - it had all I needed.

@ubermenschmexa

16 күн бұрын

@@Horus_Works Disassembled one a few days ago, and it does in fact have an o-ring (or 2 depending on the pump's model) and an oil seal. Failed to rebuild it though, but I learned how they're constructed.

Where do you buy pvc valve from than for focus 02

@Horus_Works

Жыл бұрын

Do you mean PCV valve? You can find them here: www.rockauto.com/en/catalog/ford,2002,focus,2.0l+l4+dohc,1385557,exhaust+&+emission,positive+crankcase+ventilation+(pcv)+valve,5052

Que motor tiene el focus?

@Horus_Works

Жыл бұрын

2.0 Zetec