Changing power steering pump on 2006 2.0L Ford Focus. Also showing how to use a pulley puller tool.
Жүктеу.....
Пікірлер: 25
@wiliiamamey5967 Жыл бұрын
I liked the kitty helper
@daneast Жыл бұрын
Thanks for the video. Got mine swapped out without any trouble (well, no more trouble than the usual annoying things to deal with on these kinds of jobs).
@Brikzilla3 ай бұрын
Thanks brad much appreciated
@derekdunn560710 ай бұрын
Thanks a lot brother. This was useful to me. I'm about to tackle this project on my same exact car. Green also!
@bobaganoosh88
10 ай бұрын
Good luck! I hope everything goes smoothly and there's no stripped, broken, or rounded bolts!
@victordelomas11 ай бұрын
Great video. Thks.
@boblowrey826611 ай бұрын
The sound effects are especially helpful. RRRRRR. RRRRRR. RRRRRRR. 😂😅 THANKS!😊
@bobaganoosh88
11 ай бұрын
Makes the day a little more fun 😛 welcome!
@softstoneasmr5102 Жыл бұрын
How do you know if the wheel is messed up
@curiosity23149 ай бұрын
Just watch for that Teflon seal on the high pressure side to the pump, if it is compromised you will have issues.
@softstoneasmr5102 Жыл бұрын
Is the wheel a dormant 300?
@jasoncohen39882 жыл бұрын
Nice vid man, do you know if it’s the same for an 03 focus?
@bobaganoosh88
2 жыл бұрын
Pretty sure it's about the same
@bobaganoosh88
2 жыл бұрын
And thank you kindly
@jasoncohen3988
2 жыл бұрын
@@bobaganoosh88 cool thanks man
@jamessmith-tx9zt2 жыл бұрын
Great video My high pressure nut will not move and now it's rounding 😞 😢 😔 I've sprayed it and let it set
@bobaganoosh88
2 жыл бұрын
If you can, get a good grip on it maybe with vice grips and give them a light tap to loosen. Usually it'll take a small tap to get it loose. If that fails you cam cut the metal line right by the fitting, and use a socket to get it off. Then replace the power steering line.
@jamessmith-tx9zt
2 жыл бұрын
@@bobaganoosh88 I got a set of crows foot line wrenches Cresant brand came off like it wasn't even tight turns out its my rack and Pinon leaking from the end seal
@bobaganoosh88
2 жыл бұрын
@@jamessmith-tx9zt dang it! Wish I had a video for that one
@jonathanowen1218
2 жыл бұрын
Witch way does the bottom line turn to break it loose
@bobaganoosh88
2 жыл бұрын
@@jonathanowen1218 left
@softstoneasmr5102 Жыл бұрын
Good this is so frustrating
@omarrromarrr4922 Жыл бұрын
Hey Brad, Great video Sir. Thank you, very detailed. Now with the question😁 What type of fluid did you use. I have a 2006. I'm assuming it'll be the same. Thanks man 🤘😎🤘
@bobaganoosh88
Жыл бұрын
I honestly can't remember, either ps fluid or ATF. Some ford products use atf for their power steering systems.
@omarrromarrr4922
Жыл бұрын
@@bobaganoosh88Brad, you the man. Thanks for taking the time to respond. Atf should do 🤘😎🤘
Пікірлер: 25
I liked the kitty helper
Thanks for the video. Got mine swapped out without any trouble (well, no more trouble than the usual annoying things to deal with on these kinds of jobs).
Thanks brad much appreciated
Thanks a lot brother. This was useful to me. I'm about to tackle this project on my same exact car. Green also!
@bobaganoosh88
10 ай бұрын
Good luck! I hope everything goes smoothly and there's no stripped, broken, or rounded bolts!
Great video. Thks.
The sound effects are especially helpful. RRRRRR. RRRRRR. RRRRRRR. 😂😅 THANKS!😊
@bobaganoosh88
11 ай бұрын
Makes the day a little more fun 😛 welcome!
How do you know if the wheel is messed up
Just watch for that Teflon seal on the high pressure side to the pump, if it is compromised you will have issues.
Is the wheel a dormant 300?
Nice vid man, do you know if it’s the same for an 03 focus?
@bobaganoosh88
2 жыл бұрын
Pretty sure it's about the same
@bobaganoosh88
2 жыл бұрын
And thank you kindly
@jasoncohen3988
2 жыл бұрын
@@bobaganoosh88 cool thanks man
Great video My high pressure nut will not move and now it's rounding 😞 😢 😔 I've sprayed it and let it set
@bobaganoosh88
2 жыл бұрын
If you can, get a good grip on it maybe with vice grips and give them a light tap to loosen. Usually it'll take a small tap to get it loose. If that fails you cam cut the metal line right by the fitting, and use a socket to get it off. Then replace the power steering line.
@jamessmith-tx9zt
2 жыл бұрын
@@bobaganoosh88 I got a set of crows foot line wrenches Cresant brand came off like it wasn't even tight turns out its my rack and Pinon leaking from the end seal
@bobaganoosh88
2 жыл бұрын
@@jamessmith-tx9zt dang it! Wish I had a video for that one
@jonathanowen1218
2 жыл бұрын
Witch way does the bottom line turn to break it loose
@bobaganoosh88
2 жыл бұрын
@@jonathanowen1218 left
Good this is so frustrating
Hey Brad, Great video Sir. Thank you, very detailed. Now with the question😁 What type of fluid did you use. I have a 2006. I'm assuming it'll be the same. Thanks man 🤘😎🤘
@bobaganoosh88
Жыл бұрын
I honestly can't remember, either ps fluid or ATF. Some ford products use atf for their power steering systems.
@omarrromarrr4922
Жыл бұрын
@@bobaganoosh88Brad, you the man. Thanks for taking the time to respond. Atf should do 🤘😎🤘