The results you're getting now with the gimbal and your vibration isolator are truly amazing!

You got a subscription out of this and the video about the smaller (original?) dampers - I appreciate the time and efforts that went into all the test and video creation. Thanks!

Have had problems with jello on my gimbal, always watch your videos, this is very cool! Just bought one from you!

That looks even better than your first one!

Works great . I hung the brushless gimbal with its vibration isolation system so as to have two and it has no jello . Thanks David

you have changed everything !!

That's awesome man !! Love it

Just ordered one, it looks awesome in the video! :D

@YuriTereshyn

6 жыл бұрын

Gustav Solin do you still have yours. Can I buy it off you

Great job man

Tested mine tonight for the first time. Looks great, no Jello at all. Thanks, I'll order more now.

Would you suggest the vibration isolator for reducing the shake caused by walking while holding the gopro with... say a monopod or diy cage?

Do the wire isolators need to hang from the bottom or could you mount them on top of your drone? Or would that not work because of gravity?

Nice video. Question for you. Do you ever fly with 1.3 video?

I just recieved my team rebel design beholder lite brushless gimbal and the pid settings were far from acceptable. Can you make a video of how you get your pid settings to be so perfect? Thanks for the great products and videos

Hi, what would you recommenced for wire length and thickness for the full 10 ounces. I have a gopro here 4 black and z1 tiny 2 they add to a combinded wight of 10 ounces. Sadly for my old set up i removed some of the outer wires to make it softer but i think i might have over done it. Please help with your thoughts. Thanks

hi daniel, would it work best if i used this on my 2axis gimbal with the vibration rubber, i would like to keep the vibration rubber in the gimbal is that okay?

Do you have a link to order one. Would love to give it a try on my Powered paraglider cage

amazing , how would i get this to attach on my h3-3d p2 mount ?

odd question, but if 2 of the wires are longer than the other 2 how does it impact it?

@rctestflight >>> 👍👍

"An out of balance motor".... I like how you just used an NTM :P Great product, the footage at the end is super smooth.

@ZevHoover

10 жыл бұрын

with a zip tie...

@evanforst7272

9 жыл бұрын

The shaft was bent. He obviously trusts NCTM as he uses them for most of his builds

Might try this on my 350 QX not sure if it will fit might hang to low?? Any thoughts

would love to try but it looks like you no longer make them?

that is impressive

Why is one of the last links bringing me back to the same video?

Great Vid! Anything similar for handheld DSLRs? if that exists :)

Order one Monday let me know when it's shipped. Why the popsicle sticks?

Nice!

cool

I received the two in my 2nd order.. It gave me an idea. Instead of using sticks to stiffen the CF plates I joined them together (total of 4 plates, 2 at top and 2 at bottom mated together by the screws that hold the wire.) This makes it much stiffer and neater. Have you considered going to 2 mm CF for these?

@rctestflight

9 жыл бұрын

Good idea. Yes, the next batch will 2mm carbon

@Trainboy64

9 жыл бұрын

That's great.. I'll grab more then for sue.

How can I install a PAN-TILT in the vibrator isolator?? Regards

Interesting design, but I can't help but wonder if the top plate could be eliminated and the cables mounted directly to the multicopter, saving weight. Just a thought.

@rctestflight

10 жыл бұрын

Sure, you'll just need to drill the hole pattern into the bottom plate of the aircraft

awesome

How well do you think it will work upside with the camera on top? I've just ordered one so I can tell you how. Nice video, nice product.

@Eugensdiet

10 жыл бұрын

I just saw the answer to that question further down. Didn't think someone else would want to know since it appears that the convention is to hang cameras.

Do you have plans for the POV ISO ? I would like build my own version because the is too expensive for shipping to Germany.

@lowcee89

8 жыл бұрын

+Stereodreieck RC Hi Stereodreieck, ich habe das selbe Problem und werde bald eine Version in Deutschland CNC fertigen.

@jiggi2308

8 жыл бұрын

+lowcee89 Hast du es schon fertigen lassen ? Wenn nicht +1 falls möglich ;)!

@lowcee89

8 жыл бұрын

Jiggi Meine Version ist fertig und hat auch Zenmuse Mounts sowie Gimbal Haken und 45x45x3 Bohrungen, ich lasse bald aber bestimmt eine v2 machen, gerne +1 wenn du willst

Which gimbal do you like best? T-2D, DYS or the Hummer? I'm not sure which is the best to buy. Or maybe you could do a comparison of these three?

@rctestflight

10 жыл бұрын

The hummer and DYS are both good. T2d takes some work

Can anyone pls tell me how long the steel wires are?

Like what is the length of 1 wire

Nice video but when a flight compilation

How did you cut the carbon fiber? Great job.

@rctestflight

10 жыл бұрын

CNC

I made one out of zip ties, it works great.

Is it possible to put a Gopro on top of this mount, instead of hanging from below?

@rctestflight

10 жыл бұрын

Yes, this will likely even work better than hanging the camera

Where do you get carbon?

what the Price for this?

I need one

Where can I buy this?

@iTzKomplett

6 жыл бұрын

jorge pablo i'm wondering the same question.. have you found out yet?

What is meaning of POV? Point Of View? Persistant Of View?

@goldenval

10 жыл бұрын

Point de vue ;)

@blackmennewstyle

10 жыл бұрын

VAL0PRODUCTION Merci :)

genius

1:34

I don;t belive stablilization videos becaouse they can be helped by stablilization program more then the thing.

нет такой вибрации на коптере. Ну только если моторы очень китайские и руки очень кривые.

I need to get a tetanus shot after looking at the quadcopter

Fat fingers