Postsaver Sleeve & Wrap Application Instructions (Official Guide)
Тәжірибелік нұсқаулар және стиль
Join Tony, to understand how to easily apply Postsaver Pro-Sleeve's and Pro-Sleeve Wraps to your fence and gateposts.
Purchase Pro-Sleeves and application equipment direct from us
shop.postsaver.com
If you require any further information, please visit
www.postsaver.com
You can contact us on 01452 849322 or at sales@postsaver.co.uk
-----
0:00 - Intro & Tools Required
0:25 - Sleeve Types
0:41 - Sleeve Positioning & Preparation
1:17 - Sleeve Shrinking & Application
2:38 - What Does A Good Application Look Like?
2:51 - What To Do If You Burn Or Damage Your Sleeve?
3:08 - Advice On Installing Sleeved Posts
Пікірлер: 15
Wasn’t expecting “black ring of confidence”
02:44 You sold me with "black ring of confidence"
Can I stain before applying post sleeves
02:51 In other words, "You done fucked up!" LOL
@postsaverltd what temperature should the hot air gun be? I see someone asked the same question but got given the answer 2000kw - I’m talking oC or oF temperature, thanks in advance!
can the product be used in a post anchor / bracket?
Hi I have a hot air gun as a paint stripper can I use this for the wrap
@richardgeorge2983
2 жыл бұрын
Hi Dan yes hot air gun is fine as long as it is 2kw and you are only doing a few posts as it is slower than blow torch. Hope this helps. Richard
Im wondering is there any issues with the sleeve interacting with concrete 🤔
@PostsaverLtd
2 жыл бұрын
Pro-Sleeves can be installed in all the usual ways and there is no issue when using it with concrete. Hope this helps!
Strimmer will rip that to shreds....
What about the bottom of the post?
@richardgeorge2983
Жыл бұрын
Hi Liam Deeper in the ground the likelihood of decay is around 8 to 10 times less than at the ground line due to lack of oxygen, nutrients etc so wood preservative more than adequate to provide protection here.
So why not just paint the post in bitumen?
@PostsaverLtd
2 жыл бұрын
Hi Tom, unfortunately over time posts can warp and crack, meaning the surface of the bitumen paint can break leaving the post open to fungi and decay. We've added a thermoplastic outer layer to protect against exactly this. The Pro-Sleeve also removes drying time and is a clean process from application to installation. We hope this answers your question!