Port and polish cylinder head 1.9tdi 2.0tdi 8v VW AUDI SKODA SEAT porting what tools to use DIY
Автокөліктер мен көлік құралдары
On this video I share how I do the porting and polish cylinder head.
I also share on the video what tools to use and important parts to take extra care.
Hope you enjoy the video, please help support channel, share like and subscribe
Пікірлер: 51
PD'S are the Tuga Life , best engine ever ...
Helder my bro that's called a Carbide Burr Die Carving Bit Tool 👌👌
love you Helder, good job, and thanks for sharing about TDI. TDI family ftw !!
@HelderPutoPerformance
3 жыл бұрын
Thanks for watching 😉
Been waiting for this one!
Big gains with this mod 👌 definitely a must have
Isto e o que a uk tava a precisar well done helder ill be bringing my 2.0 tdi leon for this its a must lool forca com o canal mano continua com o content go dirty diesels 🚙💨💨💨💨
@HelderPutoPerformance
3 жыл бұрын
Obrigado
👍
Grande Helder, Precisamos de videos destes em portugues 🙏🙏🙏🙏
@HelderPutoPerformance
3 ай бұрын
Tens que seguir o outro canal Helder puto PT
Do you also match the exhaust manifold to the gasket? Because if you have a step between the cylinder head and the exhaust manifold......... You could also do 3 angle valve seat (Machinist)
I disagree a well ported cylinder head would be every bit as good as the other manufacture . Any cnc ported head is only a machine copy of a hand ported one . What you have done is a proper job maybe a better choice of finishing methods would help you plus practice I could do a complete head in day, compared to the bike heads I usually do cars are easy
And I wouldn’t be overly worried about swirl either . I’d make sure the bowl was nicely shaped ignoring the hump, trust me when the injectors fire fuel at a million psi you have swirl don’t worry about that . I have an idea that the inlet port is not long enough so having a spacer made to sit the manifold further back from the head, the same could be achieved by welding tubes into a 150 inlet manifold I think this would help .
@HelderPutoPerformance
2 жыл бұрын
That’s is interesting 🤔
@Johns51
2 жыл бұрын
@@HelderPutoPerformance well think about it you have fuel sprayed at high pressure what’s that going to do to the air inside the cylinder ??. I’ve sent you a message on face book
Great work. Friend ! Do you think porting a head Will be beneficial for a PD130 with Just few modifications? Or Will It Just make performance worse?
Привет, я тоже хочу себе сделать портинг на 4м41 от митсубиси ,но страшновато испортить головку)))
Thanks for the video, very interesting, what do you do with the valves, do you hand grind them with paste or have a fancy 3 angle valve seat done?
@HelderPutoPerformance
3 жыл бұрын
I will drop a video Saturday for the valves Thanks for watching
@duckruls
3 жыл бұрын
@@HelderPutoPerformance that's great looking forward to Saturdays video, thanks for the reply :-)
Nice video, where you from mate?
@HelderPutoPerformance
2 жыл бұрын
From Portugal but I’m im England for 10 years
Did porting the head make a big difference?.
Do you recommend any where local to do engine machine work? Skimming heads/guide replacement etc?
hello. at minute 5:10 i see you have some cracks in cylinder head, between injector holes and admission holes. i have a cylinder head with small ussage at the injector bore, but it has cracks in all the admission holes and injector nozzle. can this be a problem ? i want to put this head on my car , because my head has 1mm ussage in the injector bore.
@HelderPutoPerformance
2 жыл бұрын
That cracks is normal
@romerito929
2 жыл бұрын
is normal the carck un the four holes of the inyector? mine is like yours Can I use again?
Boas, a partir de que hp deve/se começar a fazer o porting? a cabeça PD aguenta quantos cvs? tenho um cupra pd160 e fiz 280hp em banco com cabeça de origem...
@HelderPutoPerformance
3 жыл бұрын
Boas e até faz mais mas é sempre bom ter pk fica com mais entrada e saída
@RubenSilva-qf5er
3 жыл бұрын
Ok obrigado!
Can this be done to a bkd head ?
@HelderPutoPerformance
3 жыл бұрын
Yes
How many 1.9 tdi engines do you have
@HelderPutoPerformance
3 жыл бұрын
Only 3 😂
I have never Seen the 1.9 cylinder head before but that port Design seems very inefficient to me
can i use this mod on nissan td42
@HelderPutoPerformance
2 жыл бұрын
Yes mate all engine work the same principle . Thanks for watching
Era fixe meteres uma legenda em portugues .. a certos termos, palavras q n apanho pa ..
where can i buy these extra long drill bits?
@HelderPutoPerformance
3 жыл бұрын
eBay
@antongeorgiev4305
3 жыл бұрын
Can you give us a link? What to write in the search engine?
@HelderPutoPerformance
3 жыл бұрын
@@antongeorgiev4305 www.ebay.co.uk/itm/174106537719
@antongeorgiev4305
3 жыл бұрын
@@HelderPutoPerformance thanks a lot.
Seria um bom trabalho se fossem todos os dutos calibrados
@HelderPutoPerformance
Жыл бұрын
Para ser a 100 % as pessoas tem que pagar o preço certo que mandamos fazer a cnc
Onde é a sua oficina
@HelderPutoPerformance
Жыл бұрын
Uk Peterborough
Fala em português
Helder puto boa tarde. Sé possível trabalhar uma cabeça 1.9 TDI afn? Que diferença vai fazer?
@HelderPutoPerformance
11 ай бұрын
Amigo sim é possível só vai fazer diferença se você tiver matrícula para acompanhar como turbo é injeção