Polaris RZR 170 spitting and sputtering fixed!
Автокөліктер мен көлік құралдары
I show you how I fixed my spitting and sputtering issue on the Polaris rzr 170. After a week of chasing my tail tuning the carb, going up and down in jets, trying everything I could think of jumpering the brake switch turned out to be my fix! I hope this helps!
Пікірлер: 23
Thanks for sharing. I saw on the forums this sensor is prone to having issues as well as the parking brake sensor. Your vid helps me know exactly what to look for and test out this weekend, thanks again!
@tariqschmidt1413
3 жыл бұрын
I hope this works for you! I wasted a ton of shop-hours finding how to solve this issue so you don't have to hopefully!
I hope you hit the lottery today, Tariq. Thank you a thousand times. This fixed my problem.
@tariqschmidt1413
3 жыл бұрын
Wow Im so happy it helped! Cheers!!
Your a legend !!!!!!!!! Fixed my sons buggy 👌🏻
That was the trick. Thanks for the help. Your fix works great.
@tariqschmidt1413
7 ай бұрын
I'm happy to hear it worked for you!
Thanks Man. Wasn't my problem but got me on the right track. Mine was a break in the Grey wire at the CDI module connector. It does the same as all the switches. It will idle great but will not accelerate!
@krazytexaskids1252
3 ай бұрын
Can you tell me where that is located and how to fix it? I’ve tried everything and can’t get it figured out
@muddsgarage2877
2 ай бұрын
@@krazytexaskids1252 Hi, mine was at the CDI module connector that was under the rear drivers side plastic. a little pain to get at. It was the grey wire, i could pull the wire and it was like a rubber band. The copper wiring was broken inside. I stripped it and soldered it back together and used tape.
@krazytexaskids1252
2 ай бұрын
Wow that sounds hard to diagnose. Does the gray wire run up to the white module connector that’s in this video by chance? I got a tester light and tested circuits for e brake, foot brake, and throttle. I get one wire hot and the other wire not on e brake and foot brake. When they are engaged or on, both wires show hot. The black and white wires to the foot throttle don’t show anyone of them on either side of the connector is hot at anytime.
thanks for the video. My sons brand new 21 model just started doing the same thing. Hopefully this fixes it
@tariqschmidt1413
3 жыл бұрын
If its a 21 just take it back to the dealer and make them take care of it. I do know the second generation 170 is different than this older model but I suppose if it has brake kill switch that functions similar, this may help.
@PandasAndrew
2 жыл бұрын
Any luck
You are a life saver !!!!!!
@tariqschmidt1413
3 ай бұрын
Hey, happy to help!
Man your a legend, was about to burn my kids rzr till I seen this video!!
@tariqschmidt1413
2 жыл бұрын
I'm very happy to hear! I was right there with you. Polaris is stupid for switches and sensors that fail.
@35globe
2 жыл бұрын
SAME HERE!!
Will this fix idle issues?? I've cleaned the carb 3 times and adjusted it. I will not idle at all.....appreciate the video.
YOU ARE A HERO !! LOL
@tariqschmidt1413
2 жыл бұрын
Haha I appreciate you
If that was the issue then you're sxs wouldn't start at all.